davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
764480413b
kernel-ark/drivers/tty/serial
History
Thomas Bogendoerfer dd5e6d6a3d parisc: Fix interrupt routing for C8000 serial ports 
We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Helge Deller <deller@gmx.de>
2013-07-31 23:42:32 +02:00
..
8250 parisc: Fix interrupt routing for C8000 serial ports 2013-07-31 23:42:32 +02:00
cpm_uart serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
jsm TTY: jsm, remove superfluous check 2013-03-18 16:17:20 -07:00
21285.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
68328serial.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 2013-05-10 07:22:35 -07:00
altera_jtaguart.c tty: serial: altera_jtaguart: Simplify altera_jtaguart_init() 2013-02-05 11:13:51 -08:00
altera_uart.c serial: altera: remove unnecessary platform_set_drvdata() 2013-05-20 11:53:46 -07:00
amba-pl010.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
amba-pl011.c Pin control changes for the v3.11 kernel cycle: 2013-07-03 11:48:03 -07:00
apbuart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
apbuart.h
ar933x_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
arc_uart.c serial: arc_uart: Fix module alias 2013-07-26 16:34:00 -07:00
atmel_serial.c tty: atmel_serial: prepare clk before calling enable 2013-06-24 16:35:03 -07:00
bcm63xx_uart.c MIPS: BCM63XX: merge bcm63xx_clk.h into bcm63xx/clk.c 2013-05-08 01:19:04 +02:00
bfin_sport_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
bfin_sport_uart.h tty: bfin-sport-uart: Rx interrupt is not called always with irq disabled. 2011-12-09 19:05:33 -08:00
bfin_uart.c TTY: serial/bfin_uart, unbreak build with KGDB enabled 2013-03-18 16:24:30 -07:00
clps711x.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
crisv10.c crisv10: use counts from tty_port 2013-03-18 16:26:33 -07:00
crisv10.h crisv10: use counts from tty_port 2013-03-18 16:26:33 -07:00
dz.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
dz.h
efm32-uart.c serial/efm32: parse location property 2013-01-21 13:56:46 -08:00
fsl_lpuart.c tty: serial: add Freescale lpuart driver support 2013-06-08 22:30:44 -07:00
icom.c driver: tty: serial: remove cast for kzalloc return value 2013-03-18 17:09:37 -07:00
icom.h
ifx6x60.c tty: ifx6x60: Remove unused suspend/resume callbacks 2013-03-18 16:29:29 -07:00
ifx6x60.h serial:ifx6x60:Prevent data transfer when IFX6x60 port is shutdown 2012-11-01 08:50:01 -07:00
imx.c serial: imx: Fix serial clock unbalance 2013-06-17 12:49:43 -07:00
ioc3_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ioc4_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ip22zilog.c TTY: ip22zilog, fix tty_flip_buffer_push call 2013-01-16 07:36:47 -08:00
ip22zilog.h
Kconfig serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS' 2013-07-24 15:23:38 -07:00
kgdb_nmi.c kgdb: remove #include <linux/serial_8250.h> from kgdb.h 2013-02-04 15:35:26 -08:00
kgdboc.c KGDB/KDB fixes and cleanups 2012-10-13 11:16:58 +09:00
lantiq.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
lpc32xx_hs.c serial: lpc32xx: Fix fallout from tty_port conversion 2013-01-18 16:05:15 -08:00
m32r_sio_reg.h m32r: relocate drivers back out of 8250 dir 2012-02-08 15:04:32 -08:00
m32r_sio.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
m32r_sio.h TTY: serial, include pci.h in m32r_sio 2012-03-08 11:47:02 -08:00
Makefile tty: serial: add Freescale lpuart driver support 2013-06-08 22:30:44 -07:00
max310x.c tty: max310x: Use dev_pm_ops 2013-03-18 16:29:29 -07:00
max3100.c serial: max3100: use spi_get_drvdata() and spi_set_drvdata() 2013-04-05 15:49:39 -07:00
mcf.c serial: mcf: missing uart_unregister_driver() on error in mcf_init() 2013-05-20 11:54:56 -07:00
mfd.c Power management and ACPI updates for 3.11-rc1 2013-07-03 14:35:40 -07:00
mpc52xx_uart.c serial/mpc52xx_uart: fix kernel panic when system reboot 2013-06-17 12:49:43 -07:00
mpsc.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mrst_max3110.c tty: mrst_max3110: Use dev_pm_ops 2013-03-18 16:29:29 -07:00
mrst_max3110.h
msm_serial_hs.c TTY: serial/msm_serial_hs, remove unused tty 2013-03-18 16:24:30 -07:00
msm_serial.c msm_serial: Use devm_clk_get() and properly return errors 2013-06-24 13:06:41 -07:00
msm_serial.h
msm_smd_tty.c TTY: msm_smd_tty, clean up activate/shutdown 2013-03-18 16:19:44 -07:00
mux.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mxs-auart.c serial/mxs-auart: increase time to wait for transmitter to become idle 2013-07-26 16:34:00 -07:00
netx-serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
nwpserial.c tty: nwpserial: Pass correct pointer to free_irq() 2013-05-20 11:54:55 -07:00
of_serial.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
omap-serial.c serial: omap: Fix device tree based PM runtime 2013-06-17 12:49:44 -07:00
pch_uart.c pch_uart: Add uart_clk selection for the MinnowBoard 2013-06-25 21:24:11 -07:00
pmac_zilog.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
pmac_zilog.h tty/serial/pmac_zilog: Fix suspend & resume 2011-12-16 11:10:01 +11:00
pnx8xxx_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
pxa.c serial: pxa: fine-tune clk useage 2013-01-25 08:52:23 -08:00
rp2.c serial: rp2: New driver for Comtrol RocketPort 2 cards 2013-01-17 17:28:39 -08:00
sa1100.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
samsung.c ARM SoC late changes 2013-07-02 14:42:51 -07:00
samsung.h tty: serial/samsung: fix modular build 2013-04-11 13:14:37 -07:00
sb1250-duart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sc26xx.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sccnxp.c serial: sccnxp: Replace pdata.init/exit with regulator API 2013-04-15 11:04:07 -07:00
serial_core.c serial: Move "uart_console" def to core header file. 2013-05-20 11:47:21 -07:00
serial_ks8695.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
serial_txx9.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
serial-tegra.c treewide: Fix typo in printk 2013-05-28 12:02:13 +02:00
sh-sci.c serial: sh-sci: Initialise variables before access in sci_set_termios() 2013-06-26 17:41:16 +09:00
sh-sci.h serial: sh-sci: remove obsolete Kconfig macros 2013-03-25 14:06:45 -07:00
sirfsoc_uart.c tty/serial/sirf: fix error propagation in sirfsoc_uart_probe() 2013-06-06 13:07:05 -07:00
sirfsoc_uart.h serial: sirf: only use lookup table to set baudrate when ioclk=150MHz 2013-01-17 17:18:55 -08:00
sn_console.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
suncore.c tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h 2012-02-10 10:44:35 -08:00
sunhv.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunsab.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunsab.h
sunsu.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunzilog.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunzilog.h
timbuart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
timbuart.h
uartlite.c tty: serial: uartlite: Support uartlite on big and little endian systems 2013-02-13 08:38:45 -08:00
ucc_uart.c driver: tty: add missing unregister in err case 2013-06-03 10:30:43 -07:00
vr41xx_siu.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
vt8500_serial.c serial: vt8500: Remove redundant use of of_match_ptr macro 2013-06-03 10:21:33 -07:00
xilinx_uartps.c ARM SoC specific changes 2013-07-02 13:43:38 -07:00
zs.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
zs.h