kernel-ark/include/linux/fsl_devices.h
Andy Fleming b31a1d8b41 gianfar: Convert gianfar to an of_platform_driver
Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method.  The old way used fields in einfo, which no longer
exists.  The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:29:15 -08:00

121 lines
3.2 KiB
C

/*
* include/linux/fsl_devices.h
*
* Definitions for any platform device related flags or structures for
* Freescale processor devices
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _FSL_DEVICE_H_
#define _FSL_DEVICE_H_
#include <linux/types.h>
#include <linux/phy.h>
/*
* Some conventions on how we handle peripherals on Freescale chips
*
* unique device: a platform_device entry in fsl_plat_devs[] plus
* associated device information in its platform_data structure.
*
* A chip is described by a set of unique devices.
*
* Each sub-arch has its own master list of unique devices and
* enumerates them by enum fsl_devices in a sub-arch specific header
*
* The platform data structure is broken into two parts. The
* first is device specific information that help identify any
* unique features of a peripheral. The second is any
* information that may be defined by the board or how the device
* is connected externally of the chip.
*
* naming conventions:
* - platform data structures: <driver>_platform_data
* - platform data device flags: FSL_<driver>_DEV_<FLAG>
* - platform data board flags: FSL_<driver>_BRD_<FLAG>
*
*/
struct gianfar_platform_data {
/* device specific information */
u32 device_flags;
char bus_id[BUS_ID_SIZE];
phy_interface_t interface;
};
struct gianfar_mdio_data {
/* board specific information */
int irq[32];
};
/* Flags in gianfar_platform_data */
#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */
#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */
struct fsl_i2c_platform_data {
/* device specific information */
u32 device_flags;
};
/* Flags related to I2C device features */
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
FSL_USB2_DR_DEVICE,
FSL_USB2_DR_OTG,
};
enum fsl_usb2_phy_modes {
FSL_USB2_PHY_NONE,
FSL_USB2_PHY_ULPI,
FSL_USB2_PHY_UTMI,
FSL_USB2_PHY_UTMI_WIDE,
FSL_USB2_PHY_SERIAL,
};
struct fsl_usb2_platform_data {
/* board specific information */
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
};
/* Flags in fsl_usb2_mph_platform_data */
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
u16 bus_num;
bool qe_mode;
/* board specific information */
u16 max_chipselect;
void (*activate_cs)(u8 cs, u8 polarity);
void (*deactivate_cs)(u8 cs, u8 polarity);
u32 sysclk;
};
struct mpc8xx_pcmcia_ops {
void(*hw_ctrl)(int slot, int enable);
int(*voltage_set)(int slot, int vcc, int vpp);
};
/* Returns non-zero if the current suspend operation would
* lead to a deep sleep (i.e. power removed from the core,
* instead of just the clock).
*/
int fsl_deep_sleep(void);
#endif /* _FSL_DEVICE_H_ */