Rajendra Nayak 74bea6b988 OMAP: powerdomain: Move static allocations from powerdomains.h to a .c file ... powerdomains.h header today has only static definitions. Adding any function declarations into it and including it in multiple source file is expected to cause issues. Hence move all the static definitions from powerdomains.h file into powerdomains_data.c file. Also, create a new powerdomain section of the mach-omap2/Makefile, and rearrange the prcm-common part of the Makefile, now that the powerdomain code is in its own Makefile section. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: rearrange Makefile changes, tweaked commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>		2010-12-21 20:01:17 -07:00
..
include/mach	omap2+: Initialize omap_irq_base for entry-macro.S from platform code	2010-12-10 09:42:51 -08:00
board-2430sdp.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-3430sdp.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-3630sdp.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-4430sdp.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-am3517crane.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-am3517evm.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-apollon.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-cm-t35.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-cm-t3517.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-devkit8000.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-flash.c	OMAP2plus: Fix static function warnings	2010-10-08 10:02:49 -07:00
board-flash.h	OMAP2plus: Fix static function warnings	2010-10-08 10:02:49 -07:00
board-generic.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-h4.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-igep0020.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-igep0030.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-ldp.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-n8x0.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-omap3beagle.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-omap3evm.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-omap3logic.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-omap3pandora.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-omap3stalker.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-omap3touchbook.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-omap4panda.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-overo.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-rm680.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-rx51-peripherals.c	omap: rx51: Switch rx51_tpa6130a2_data __initdata to__initdata_or_module	2010-12-20 18:48:16 -08:00
board-rx51-video.c	Added video data to support tvout on rx51	2010-12-20 18:48:16 -08:00
board-rx51.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
board-zoom-debugboard.c	OMAP2plus: Fix static function warnings	2010-10-08 10:02:49 -07:00
board-zoom-peripherals.c	omap: kill all section mismatch warning for omap2plus_defconfig	2010-12-17 17:25:26 -08:00
board-zoom.c	OMAP2+: io: split omap2_init_common_hw()	2010-12-21 19:55:11 -07:00
clkt2xxx_apll.c	OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c
clkt2xxx_osc.c
clkt2xxx_sys.c
clkt2xxx_virt_prcm_set.c	OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y	2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c
clkt_clksel.c	OMAP2+ clock: clean up clkt_clksel.c	2010-05-20 12:31:06 -06:00
clkt_dpll.c
clock2xxx.c
clock2xxx.h
clock3xxx_data.c	I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c	2010-12-20 17:53:04 -08:00
clock3xxx.c
clock3xxx.h
clock34xx.c
clock34xx.h
clock36xx.c
clock36xx.h
clock44xx_data.c	I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c	2010-12-20 17:53:04 -08:00
clock44xx.h
clock2420_data.c	I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c	2010-12-20 17:53:04 -08:00
clock2430_data.c	I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c	2010-12-20 17:53:04 -08:00
clock2430.c
clock3517.c
clock3517.h
clock_common_data.c	OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality	2010-05-20 12:31:07 -06:00
clock.c	OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks	2010-10-08 11:40:20 -06:00
clock.h	OMAP2+ clock: clean up clkt_clksel.c	2010-05-20 12:31:06 -06:00
clockdomain.c	OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts	2010-09-23 17:14:12 -07:00
clockdomains44xx.h	OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention	2010-05-20 12:31:11 -06:00
clockdomains.h	OMAP: powerdomain: Move static allocations from powerdomains.h to a .c file	2010-12-21 20:01:17 -07:00
cm4xxx.c	OMAP4: PM: Declare idle modules as functional too	2010-09-24 10:23:18 -06:00
cm44xx.h	OMAP4: PM: Define additional registers for ES2	2010-09-27 14:02:56 -06:00
cm-regbits-24xx.h	OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430	2010-11-09 09:26:08 -08:00
cm-regbits-34xx.h	OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs	2010-09-29 12:43:00 -07:00
cm-regbits-44xx.h	OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2	2010-09-27 14:02:55 -06:00
cm.c	OMAP24xx: CM: fix mask used for checking IDLEST status	2010-07-26 16:34:28 -06:00
cm.h	OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function	2010-05-20 12:31:08 -06:00
common.c	OMAP: control: move plat-omap/control.h to mach-omap2/control.h	2010-10-08 11:40:20 -06:00
control.c	OMAP3: rework of the ASM sleep code execution paths	2010-12-21 14:45:58 -08:00
control.h	OMAP3: remove hardcoded values from the ASM sleep code	2010-12-21 14:45:57 -08:00
cpuidle34xx.c	OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2	2010-12-21 14:45:53 -08:00
devices.c	OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism	2010-12-21 19:57:40 -07:00
dma.c	OMAP: DMA: Convert DMA library into platform driver	2010-12-20 18:38:31 -08:00
dpll3xxx.c	fix typos concerning "hierarchy"	2010-06-16 18:03:14 +02:00
dsp.c	omap: add dsp platform device	2010-10-05 12:05:11 -07:00
emu.c
gpio.c	OMAP2+: GPIO: device registration	2010-12-07 16:26:57 -08:00
gpmc-nand.c	omap3 nand: cleanup virtual address usages	2010-08-02 15:30:38 +03:00
gpmc-onenand.c
gpmc-smc91x.c
gpmc-smsc911x.c	ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC	2010-09-28 11:39:18 -07:00
gpmc.c	omap3 nand: cleanup virtual address usages	2010-08-02 15:30:38 +03:00
hsmmc.c	OMAP: control: move plat-omap/control.h to mach-omap2/control.h	2010-10-08 11:40:20 -06:00
hsmmc.h	Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6	2010-10-25 13:46:56 -07:00
i2c.c	omap: mux: Convert 2420 platform init code to use new mux code	2010-07-05 16:31:40 +03:00
id.c	OMAP: control: move plat-omap/control.h to mach-omap2/control.h	2010-10-08 11:40:20 -06:00
io.c	OMAP: powerdomain: Move static allocations from powerdomains.h to a .c file	2010-12-21 20:01:17 -07:00
io.h	OMAP: plat-omap: Fix static function warnings	2010-10-08 10:12:38 -07:00
iommu2.c	omap iommu: move iommu_disable at fault to the above layer	2010-06-29 07:55:07 +03:00
irq.c	OMAP3: add comments for erratas i540 and i478 workarounds	2010-12-17 16:48:20 -08:00
Kconfig	omap4: opp: add OPP table data	2010-12-21 14:30:40 -08:00
mailbox.c	OMAP: mailbox: fix detection for previously supported chips	2010-12-02 05:43:16 -06:00
Makefile	OMAP: powerdomain: Move static allocations from powerdomains.h to a .c file	2010-12-21 20:01:17 -07:00
Makefile.boot
mcbsp.c	OMAP: McBSP: Remove null omap44xx ops comment	2010-10-08 11:40:21 -06:00
mux34xx.c	OMAP: mux: Add __func__ macro to pr_xxx macros	2010-11-17 12:01:54 +01:00
mux34xx.h
mux44xx.c	OMAP: mux: Add __func__ macro to pr_xxx macros	2010-11-17 12:01:54 +01:00
mux44xx.h	OMAP4: mux: Add CBS package data for OMAP4430 ES2	2010-11-17 12:01:52 +01:00
mux2420.c	OMAP: mux: Add __func__ macro to pr_xxx macros	2010-11-17 12:01:54 +01:00
mux2420.h	omap: mux: Add data for 2420	2010-07-05 16:31:36 +03:00
mux2430.c	OMAP: mux: Add __func__ macro to pr_xxx macros	2010-11-17 12:01:54 +01:00
mux2430.h	omap: mux: Add data for 2430	2010-07-05 16:31:36 +03:00
mux.c	OMAP: mux: Add __func__ macro to pr_xxx macros	2010-11-17 12:01:54 +01:00
mux.h	arm: mach-omap2: remove NULL board_mux from board files	2010-12-02 17:03:41 -08:00
omap4-common.c	omap4: l2x0: Enable early BRESP bit	2010-12-18 09:33:01 -08:00
omap44xx-smc.S	omap4: Add smc API to read AuxCoreBoot0 register	2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c	OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism	2010-12-21 19:57:40 -07:00
omap_hwmod_44xx_data.c	OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism	2010-12-21 19:57:40 -07:00
omap_hwmod_2420_data.c	OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism	2010-12-21 19:57:40 -07:00
omap_hwmod_2430_data.c	OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism	2010-12-21 19:57:40 -07:00
omap_hwmod_common_data.c	OMAP: hwmod data: add class for IVA hwmods	2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h	OMAP: hwmod data: add class for IVA hwmods	2010-07-26 16:34:31 -06:00
omap_hwmod.c	OMAP2+: hwmod: Update the sysc_cache in case module context is lost	2010-12-21 19:55:13 -07:00
omap_opp_data.h	omap: opp: add OMAP3 OPP table data and common init	2010-12-21 14:30:40 -08:00
omap-headsmp.S	omap4: Add smc API to read AuxCoreBoot0 register	2010-08-02 13:18:18 +03:00
omap-hotplug.c	omap4: hotplug: Add basic CPU hotplug support	2010-08-02 13:18:19 +03:00
omap-iommu.c	OMAP: iommu: make iva2 iommu selectable	2010-12-15 11:33:31 -06:00
omap-smp.c	omap: Fix sev instruction usage for multi-omap	2010-08-16 09:22:04 +03:00
opp2xxx.h
opp3xxx_data.c	omap: opp: add OMAP3 OPP table data and common init	2010-12-21 14:30:40 -08:00
opp4xxx_data.c	omap4: opp: add OPP table data	2010-12-21 14:30:40 -08:00
opp2420_data.c
opp2430_data.c
opp.c	omap: opp: add OMAP3 OPP table data and common init	2010-12-21 14:30:40 -08:00
pm24xx.c	OMAP2+: disable idle early in the suspend sequence	2010-12-21 14:29:34 -08:00
pm34xx.c	OMAP3: add comments for low power code errata	2010-12-21 14:45:59 -08:00
pm44xx.c	OMAP2+: disable idle early in the suspend sequence	2010-12-21 14:29:34 -08:00
pm_bus.c	OMAP2+: PM: initial runtime PM core support	2010-09-21 11:51:23 -07:00
pm-debug.c	omap: PM debug: fix wake-on-timer debugfs dependency	2010-12-02 17:08:48 -08:00
pm.c	OMAP: pm.c correct the initcall for an early init.	2010-12-21 14:29:34 -08:00
pm.h	Merge branch 'pm-opp' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus	2010-12-21 17:05:57 -08:00
powerdomain.c	OMAP2: powerdomain: Add break in switch statement	2010-08-03 10:21:07 +03:00
powerdomains24xx.h
powerdomains34xx.h	OMAP3: add comments for erratas i540 and i478 workarounds	2010-12-17 16:48:20 -08:00
powerdomains44xx.h	OMAP4: powerdomain: Update DSS logic state for ES2	2010-09-27 14:02:56 -06:00
powerdomains_data.c	OMAP: powerdomain: Move static allocations from powerdomains.h to a .c file	2010-12-21 20:01:17 -07:00
prcm-common.h	OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks	2010-12-10 18:04:43 -08:00
prcm.c	OMAP: control: move plat-omap/control.h to mach-omap2/control.h	2010-10-08 11:40:20 -06:00
prm2xxx_3xxx.c	OMAP2/3: PRM: add module hard reset support	2010-09-21 15:12:40 -06:00
prm44xx.c	OMAP4: PRM: add module hard reset support	2010-09-21 15:12:21 -06:00
prm44xx.h	OMAP4: PM: Define additional registers for ES2	2010-09-27 14:02:56 -06:00
prm-regbits-24xx.h	OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes	2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h	OMAP3: hwmod: add I2C hwmods for OMAP3430	2010-11-09 09:29:13 -08:00
prm-regbits-44xx.h	OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2	2010-09-27 14:02:55 -06:00
prm.h	OMAP2/3: PRM: add module hard reset support	2010-09-21 15:12:40 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c	arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data	2010-12-17 15:13:46 -08:00
sdram-nokia.h	arm: omap: add sdram-nokia.h	2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c
sdrc.c
sdrc.h	OMAP2+: use global values for the SRAM PA addresses	2010-12-21 14:45:56 -08:00
serial.c	OMAP2+: hwmod: upgrade per-hwmod mutex to a spinlock	2010-12-21 19:55:12 -07:00
sleep24xx.S
sleep34xx.S	OMAP3: ASM sleep code format rework	2010-12-21 14:45:59 -08:00
sram34xx.S	omap3: Prevent SDRC deadlock when L3 is changing frequency	2010-09-27 14:02:59 -06:00
sram242x.S
sram243x.S
timer-gp.c	arm: omap2: timer-gp: delete unused variable	2010-11-24 16:49:42 -08:00
timer-gp.h	OMAP2plus: Fix static function warnings	2010-10-08 10:02:49 -07:00
timer-mpu.c
usb-ehci.c	omap: mux: Remove old mux code	2010-07-05 16:31:40 +03:00
usb-fs.c	OMAP: control: move plat-omap/control.h to mach-omap2/control.h	2010-10-08 11:40:20 -06:00
usb-musb.c	USB: AM35x: Add musb support	2010-10-22 10:22:16 -07:00
usb-tusb6010.c	omap: mux: Convert 2420 platform init code to use new mux code	2010-07-05 16:31:40 +03:00
wd_timer.c	OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism	2010-12-21 19:57:40 -07:00
wd_timer.h	OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c	2010-12-21 19:56:17 -07:00