kernel-ark/include/asm-arm/elf.h
Dan Williams f393e99d9e [ARM] 4496/1: elf_hwcap: fix up #include misplacement
While bisecting an iop13xx compile failure I noticed that
include/asm-arm/hwcap.h should be included from include/asm-arm/elf.h
outside #ifndef __ASSEMBLY__ since hwcap.h has its own __ASSEMBLY__
protections.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 21:29:18 +01:00

120 lines
3.3 KiB
C

#ifndef __ASMARM_ELF_H
#define __ASMARM_ELF_H
#include <asm/hwcap.h>
#ifndef __ASSEMBLY__
/*
* ELF register definitions..
*/
#include <asm/ptrace.h>
#include <asm/user.h>
typedef unsigned long elf_greg_t;
typedef unsigned long elf_freg_t[3];
#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef struct user_fp elf_fpregset_t;
#endif
#define EM_ARM 40
#define EF_ARM_APCS26 0x08
#define EF_ARM_SOFT_FLOAT 0x200
#define EF_ARM_EABI_MASK 0xFF000000
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
/*
* These are used to set parameters in the core dumps.
*/
#define ELF_CLASS ELFCLASS32
#ifdef __ARMEB__
#define ELF_DATA ELFDATA2MSB
#else
#define ELF_DATA ELFDATA2LSB
#endif
#define ELF_ARCH EM_ARM
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
/*
* This yields a string that ld.so will use to load implementation
* specific libraries for optimization. This is more specific in
* intent than poking at uname or /proc/cpuinfo.
*
* For now we just provide a fairly general string that describes the
* processor family. This could be made more specific later if someone
* implemented optimisations that require it. 26-bit CPUs give you
* "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
* supported). 32-bit CPUs give you "v3[lb]" for anything based on an
* ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
* core.
*/
#define ELF_PLATFORM_SIZE 8
#define ELF_PLATFORM (elf_platform)
extern char elf_platform[];
#endif
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
/*
* 32-bit code is always OK. Some cpus can do 26-bit, some can't.
*/
#define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
#define ELF_THUMB_OK(x) \
((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
((x)->e_entry & 3) == 0)
#define ELF_26BIT_OK(x) \
((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
((x)->e_flags & EF_ARM_APCS26) == 0)
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
use of this is to invoke "./ld.so someprog" to test out a new version of
the loader. We need to make sure that it is out of the way of the program
that it will "exec", and that there is sufficient room for the brk. */
#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
/* When the program starts, a1 contains a pointer to a function to be
registered with atexit, as per the SVR4 ABI. A value of 0 means we
have no such handler. */
#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
/*
* Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
* and CP1, we only enable access to the iWMMXt coprocessor if the
* binary is EABI or softfloat (and thus, guaranteed not to use
* FPA instructions.)
*/
#define SET_PERSONALITY(ex, ibcs2) \
do { \
if ((ex).e_flags & EF_ARM_APCS26) { \
set_personality(PER_LINUX); \
} else { \
set_personality(PER_LINUX_32BIT); \
if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
set_thread_flag(TIF_USING_IWMMXT); \
else \
clear_thread_flag(TIF_USING_IWMMXT); \
} \
} while (0)
#endif
#endif