kernel-ark/drivers/staging/tm6000/tm6000-regs.h
Mauro Carvalho Chehab 6eb5c8a6c8 V4L/DVB (12823): tm6000: Uses another method for handling incomplete packets
This requires a little more memory, and some memcpy to work, but the logic is
simpler than the previous method.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:40:05 -03:00

87 lines
2.6 KiB
C

/*
tm6000-regs.h - driver for TM5600/TM6000 USB video capture devices
Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 2
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* Define TV Master TM5600/TM6000 Request codes
*/
#define REQ_00_SET_IR_VALUE 0
#define REQ_01_SET_WAKEUP_IRCODE 1
#define REQ_02_GET_IR_CODE 2
#define REQ_03_SET_GET_MCU_PIN 3
#define REQ_04_EN_DISABLE_MCU_INT 4
#define REQ_05_SET_GET_USBREG 5
/* Write: RegNum, Value, 0 */
/* Read : RegNum, Value, 1, RegStatus */
#define REQ_06_SET_GET_USBREG_BIT 6
#define REQ_07_SET_GET_AVREG 7
/* Write: RegNum, Value, 0 */
/* Read : RegNum, Value, 1, RegStatus */
#define REQ_08_SET_GET_AVREG_BIT 8
#define REQ_09_SET_GET_TUNER_FQ 9
#define REQ_10_SET_TUNER_SYSTEM 10
#define REQ_11_SET_EEPROM_ADDR 11
#define REQ_12_SET_GET_EEPROMBYTE 12
#define REQ_13_GET_EEPROM_SEQREAD 13
#define REQ_14_SET_GET_I2C_WR2_RDN 14
#define REQ_15_SET_GET_I2CBYTE 15
/* Write: Subaddr, Slave Addr, value, 0 */
/* Read : Subaddr, Slave Addr, value, 1 */
#define REQ_16_SET_GET_I2C_WR1_RDN 16
/* Subaddr, Slave Addr, 0, length */
#define REQ_17_SET_GET_I2CFP 17
/* Write: Slave Addr, register, value */
/* Read : Slave Addr, register, 2, data */
/*
* Define TV Master TM5600/TM6000 GPIO lines
*/
#define TM6000_GPIO_CLK 0x101
#define TM6000_GPIO_DATA 0x100
#define TM6000_GPIO_1 0x102
#define TM6000_GPIO_2 0x103
#define TM6000_GPIO_3 0x104
#define TM6000_GPIO_4 0x300
#define TM6000_GPIO_5 0x301
#define TM6000_GPIO_6 0x304
#define TM6000_GPIO_7 0x305
/* tm6010 defines GPIO with different values */
#define TM6010_GPIO_0 0x0102
#define TM6010_GPIO_1 0x0103
#define TM6010_GPIO_2 0x0104
#define TM6010_GPIO_3 0x0105
#define TM6010_GPIO_4 0x0106
#define TM6010_GPIO_5 0x0107
#define TM6010_GPIO_6 0x0300
#define TM6010_GPIO_7 0x0301
#define TM6010_GPIO_9 0x0305
/*
* Define TV Master TM5600/TM6000 URB message codes and length
*/
enum {
TM6000_URB_MSG_VIDEO=1,
TM6000_URB_MSG_AUDIO,
TM6000_URB_MSG_VBI,
TM6000_URB_MSG_PTS,
TM6000_URB_MSG_ERR,
};