516c1514b0
Current code uses devm_regulator_register(), so the resource management code will ensure that the resource is freed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
369 lines
9.0 KiB
C
369 lines
9.0 KiB
C
/*
|
|
* da9211-regulator.c - Regulator device driver for DA9211
|
|
* Copyright (C) 2014 Dialog Semiconductor Ltd.
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Library General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Library General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/regulator/da9211.h>
|
|
#include "da9211-regulator.h"
|
|
|
|
#define DA9211_BUCK_MODE_SLEEP 1
|
|
#define DA9211_BUCK_MODE_SYNC 2
|
|
#define DA9211_BUCK_MODE_AUTO 3
|
|
|
|
/* DA9211 REGULATOR IDs */
|
|
#define DA9211_ID_BUCKA 0
|
|
#define DA9211_ID_BUCKB 1
|
|
|
|
struct da9211 {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct da9211_pdata *pdata;
|
|
struct regulator_dev *rdev[DA9211_MAX_REGULATORS];
|
|
int num_regulator;
|
|
int chip_irq;
|
|
};
|
|
|
|
static const struct regmap_range_cfg da9211_regmap_range[] = {
|
|
{
|
|
.selector_reg = DA9211_REG_PAGE_CON,
|
|
.selector_mask = DA9211_REG_PAGE_MASK,
|
|
.selector_shift = DA9211_REG_PAGE_SHIFT,
|
|
.window_start = 0,
|
|
.window_len = 256,
|
|
.range_min = 0,
|
|
.range_max = 2*256,
|
|
},
|
|
};
|
|
|
|
static const struct regmap_config da9211_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 2 * 256,
|
|
.ranges = da9211_regmap_range,
|
|
.num_ranges = ARRAY_SIZE(da9211_regmap_range),
|
|
};
|
|
|
|
/* Default limits measured in millivolts and milliamps */
|
|
#define DA9211_MIN_MV 300
|
|
#define DA9211_MAX_MV 1570
|
|
#define DA9211_STEP_MV 10
|
|
|
|
/* Current limits for buck (uA) indices corresponds with register values */
|
|
static const int da9211_current_limits[] = {
|
|
2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000,
|
|
3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000
|
|
};
|
|
|
|
static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
struct da9211 *chip = rdev_get_drvdata(rdev);
|
|
unsigned int data;
|
|
int ret, mode = 0;
|
|
|
|
ret = regmap_read(chip->regmap, DA9211_REG_BUCKA_CONF+id, &data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (data & 0x03) {
|
|
case DA9211_BUCK_MODE_SYNC:
|
|
mode = REGULATOR_MODE_FAST;
|
|
break;
|
|
case DA9211_BUCK_MODE_AUTO:
|
|
mode = REGULATOR_MODE_NORMAL;
|
|
break;
|
|
case DA9211_BUCK_MODE_SLEEP:
|
|
mode = REGULATOR_MODE_STANDBY;
|
|
break;
|
|
}
|
|
|
|
return mode;
|
|
}
|
|
|
|
static int da9211_buck_set_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
struct da9211 *chip = rdev_get_drvdata(rdev);
|
|
int val = 0;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
val = DA9211_BUCK_MODE_SYNC;
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = DA9211_BUCK_MODE_AUTO;
|
|
break;
|
|
case REGULATOR_MODE_STANDBY:
|
|
val = DA9211_BUCK_MODE_SLEEP;
|
|
break;
|
|
}
|
|
|
|
return regmap_update_bits(chip->regmap, DA9211_REG_BUCKA_CONF+id,
|
|
0x03, val);
|
|
}
|
|
|
|
static int da9211_set_current_limit(struct regulator_dev *rdev, int min,
|
|
int max)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
struct da9211 *chip = rdev_get_drvdata(rdev);
|
|
int i;
|
|
|
|
/* search for closest to maximum */
|
|
for (i = ARRAY_SIZE(da9211_current_limits)-1; i >= 0; i--) {
|
|
if (min <= da9211_current_limits[i] &&
|
|
max >= da9211_current_limits[i]) {
|
|
return regmap_update_bits(chip->regmap,
|
|
DA9211_REG_BUCK_ILIM,
|
|
(0x0F << id*4), (i << id*4));
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int da9211_get_current_limit(struct regulator_dev *rdev)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
struct da9211 *chip = rdev_get_drvdata(rdev);
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
ret = regmap_read(chip->regmap, DA9211_REG_BUCK_ILIM, &data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* select one of 16 values: 0000 (2000mA) to 1111 (5000mA) */
|
|
data = (data >> id*4) & 0x0F;
|
|
return da9211_current_limits[data];
|
|
}
|
|
|
|
static struct regulator_ops da9211_buck_ops = {
|
|
.get_mode = da9211_buck_get_mode,
|
|
.set_mode = da9211_buck_set_mode,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_current_limit = da9211_set_current_limit,
|
|
.get_current_limit = da9211_get_current_limit,
|
|
};
|
|
|
|
#define DA9211_BUCK(_id) \
|
|
{\
|
|
.name = #_id,\
|
|
.ops = &da9211_buck_ops,\
|
|
.type = REGULATOR_VOLTAGE,\
|
|
.id = DA9211_ID_##_id,\
|
|
.n_voltages = (DA9211_MAX_MV - DA9211_MIN_MV) / DA9211_STEP_MV + 1,\
|
|
.min_uV = (DA9211_MIN_MV * 1000),\
|
|
.uV_step = (DA9211_STEP_MV * 1000),\
|
|
.enable_reg = DA9211_REG_BUCKA_CONT + DA9211_ID_##_id,\
|
|
.enable_mask = DA9211_BUCKA_EN,\
|
|
.vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\
|
|
.vsel_mask = DA9211_VBUCK_MASK,\
|
|
.owner = THIS_MODULE,\
|
|
}
|
|
|
|
static struct regulator_desc da9211_regulators[] = {
|
|
DA9211_BUCK(BUCKA),
|
|
DA9211_BUCK(BUCKB),
|
|
};
|
|
|
|
static irqreturn_t da9211_irq_handler(int irq, void *data)
|
|
{
|
|
struct da9211 *chip = data;
|
|
int reg_val, err, ret = IRQ_NONE;
|
|
|
|
err = regmap_read(chip->regmap, DA9211_REG_EVENT_B, ®_val);
|
|
if (err < 0)
|
|
goto error_i2c;
|
|
|
|
if (reg_val & DA9211_E_OV_CURR_A) {
|
|
regulator_notifier_call_chain(chip->rdev[0],
|
|
REGULATOR_EVENT_OVER_CURRENT,
|
|
rdev_get_drvdata(chip->rdev[0]));
|
|
|
|
err = regmap_write(chip->regmap, DA9211_REG_EVENT_B,
|
|
DA9211_E_OV_CURR_A);
|
|
if (err < 0)
|
|
goto error_i2c;
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (reg_val & DA9211_E_OV_CURR_B) {
|
|
regulator_notifier_call_chain(chip->rdev[1],
|
|
REGULATOR_EVENT_OVER_CURRENT,
|
|
rdev_get_drvdata(chip->rdev[1]));
|
|
|
|
err = regmap_write(chip->regmap, DA9211_REG_EVENT_B,
|
|
DA9211_E_OV_CURR_B);
|
|
if (err < 0)
|
|
goto error_i2c;
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
|
|
error_i2c:
|
|
dev_err(chip->dev, "I2C error : %d\n", err);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int da9211_regulator_init(struct da9211 *chip)
|
|
{
|
|
struct regulator_config config = { };
|
|
int i, ret;
|
|
unsigned int data;
|
|
|
|
ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "Failed to read CONTROL_E reg: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
data &= DA9211_SLAVE_SEL;
|
|
/* If configuration for 1/2 bucks is different between platform data
|
|
* and the register, driver should exit.
|
|
*/
|
|
if ((chip->pdata->num_buck == 2 && data == 0x40)
|
|
|| (chip->pdata->num_buck == 1 && data == 0x00)) {
|
|
if (data == 0)
|
|
chip->num_regulator = 1;
|
|
else
|
|
chip->num_regulator = 2;
|
|
} else {
|
|
dev_err(chip->dev, "Configuration is mismatched\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < chip->num_regulator; i++) {
|
|
if (chip->pdata)
|
|
config.init_data =
|
|
&(chip->pdata->init_data[i]);
|
|
|
|
config.dev = chip->dev;
|
|
config.driver_data = chip;
|
|
config.regmap = chip->regmap;
|
|
|
|
chip->rdev[i] = devm_regulator_register(chip->dev,
|
|
&da9211_regulators[i], &config);
|
|
if (IS_ERR(chip->rdev[i])) {
|
|
dev_err(chip->dev,
|
|
"Failed to register DA9211 regulator\n");
|
|
return PTR_ERR(chip->rdev[i]);
|
|
}
|
|
|
|
if (chip->chip_irq != 0) {
|
|
ret = regmap_update_bits(chip->regmap,
|
|
DA9211_REG_MASK_B, DA9211_M_OV_CURR_A << i, 1);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev,
|
|
"Failed to update mask reg: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
/*
|
|
* I2C driver interface functions
|
|
*/
|
|
static int da9211_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct da9211 *chip;
|
|
int error, ret;
|
|
|
|
chip = devm_kzalloc(&i2c->dev, sizeof(struct da9211), GFP_KERNEL);
|
|
|
|
chip->dev = &i2c->dev;
|
|
chip->regmap = devm_regmap_init_i2c(i2c, &da9211_regmap_config);
|
|
if (IS_ERR(chip->regmap)) {
|
|
error = PTR_ERR(chip->regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
i2c_set_clientdata(i2c, chip);
|
|
|
|
chip->pdata = i2c->dev.platform_data;
|
|
if (!chip->pdata) {
|
|
dev_err(&i2c->dev, "No platform init data supplied\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
chip->chip_irq = i2c->irq;
|
|
|
|
if (chip->chip_irq != 0) {
|
|
ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL,
|
|
da9211_irq_handler,
|
|
IRQF_TRIGGER_LOW|IRQF_ONESHOT,
|
|
"da9211", chip);
|
|
if (ret != 0) {
|
|
dev_err(chip->dev, "Failed to request IRQ: %d\n",
|
|
chip->chip_irq);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_warn(chip->dev, "No IRQ configured\n");
|
|
}
|
|
|
|
ret = da9211_regulator_init(chip);
|
|
|
|
if (ret < 0)
|
|
dev_err(&i2c->dev, "Failed to initialize regulator: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_device_id da9211_i2c_id[] = {
|
|
{"da9211", 0},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
|
|
|
|
static struct i2c_driver da9211_regulator_driver = {
|
|
.driver = {
|
|
.name = "da9211",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = da9211_i2c_probe,
|
|
.id_table = da9211_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(da9211_regulator_driver);
|
|
|
|
MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
|
|
MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211");
|
|
MODULE_LICENSE("GPL v2");
|