e9136550eb
By increasing the timeout for rt2x00usb_vendor_request, we should limit the number of loops required to send a signal to the device succefully. 500ms timeout is specified by the Ralink legacy drivers for rt2500usb. For rt73usb 1000ms is specified, but that includes the timeout for the firmware which is already specified in a different define. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
588 lines
14 KiB
C
588 lines
14 KiB
C
/*
|
|
Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
|
|
<http://rt2x00.serialmonkey.com>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the
|
|
Free Software Foundation, Inc.,
|
|
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
/*
|
|
Module: rt2x00usb
|
|
Abstract: rt2x00 generic usb device routines.
|
|
*/
|
|
|
|
/*
|
|
* Set enviroment defines for rt2x00.h
|
|
*/
|
|
#define DRV_NAME "rt2x00usb"
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include "rt2x00.h"
|
|
#include "rt2x00usb.h"
|
|
|
|
/*
|
|
* Interfacing with the HW.
|
|
*/
|
|
int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
|
|
const u8 request, const u8 requesttype,
|
|
const u16 offset, const u16 value,
|
|
void *buffer, const u16 buffer_length,
|
|
const int timeout)
|
|
{
|
|
struct usb_device *usb_dev =
|
|
interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
|
|
int status;
|
|
unsigned int i;
|
|
unsigned int pipe =
|
|
(requesttype == USB_VENDOR_REQUEST_IN) ?
|
|
usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
|
|
|
|
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
|
|
status = usb_control_msg(usb_dev, pipe, request, requesttype,
|
|
value, offset, buffer, buffer_length,
|
|
timeout);
|
|
if (status >= 0)
|
|
return 0;
|
|
|
|
/*
|
|
* Check for errors
|
|
* -ENODEV: Device has disappeared, no point continuing.
|
|
* All other errors: Try again.
|
|
*/
|
|
else if (status == -ENODEV)
|
|
break;
|
|
}
|
|
|
|
ERROR(rt2x00dev,
|
|
"Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n",
|
|
request, offset, status);
|
|
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request);
|
|
|
|
int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,
|
|
const u8 request, const u8 requesttype,
|
|
const u16 offset, void *buffer,
|
|
const u16 buffer_length, const int timeout)
|
|
{
|
|
int status;
|
|
|
|
/*
|
|
* Check for Cache availability.
|
|
*/
|
|
if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) {
|
|
ERROR(rt2x00dev, "CSR cache not available.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (requesttype == USB_VENDOR_REQUEST_OUT)
|
|
memcpy(rt2x00dev->csr_cache, buffer, buffer_length);
|
|
|
|
status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype,
|
|
offset, 0, rt2x00dev->csr_cache,
|
|
buffer_length, timeout);
|
|
|
|
if (!status && requesttype == USB_VENDOR_REQUEST_IN)
|
|
memcpy(buffer, rt2x00dev->csr_cache, buffer_length);
|
|
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
|
|
|
|
/*
|
|
* TX data handlers.
|
|
*/
|
|
static void rt2x00usb_interrupt_txdone(struct urb *urb)
|
|
{
|
|
struct data_entry *entry = (struct data_entry *)urb->context;
|
|
struct data_ring *ring = entry->ring;
|
|
struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
|
|
struct data_desc *txd = (struct data_desc *)entry->skb->data;
|
|
u32 word;
|
|
int tx_status;
|
|
|
|
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
|
|
!__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
|
|
return;
|
|
|
|
rt2x00_desc_read(txd, 0, &word);
|
|
|
|
/*
|
|
* Remove the descriptor data from the buffer.
|
|
*/
|
|
skb_pull(entry->skb, ring->desc_size);
|
|
|
|
/*
|
|
* Obtain the status about this packet.
|
|
*/
|
|
tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
|
|
|
|
rt2x00lib_txdone(entry, tx_status, 0);
|
|
|
|
/*
|
|
* Make this entry available for reuse.
|
|
*/
|
|
entry->flags = 0;
|
|
rt2x00_ring_index_done_inc(entry->ring);
|
|
|
|
/*
|
|
* If the data ring was full before the txdone handler
|
|
* we must make sure the packet queue in the mac80211 stack
|
|
* is reenabled when the txdone handler has finished.
|
|
*/
|
|
if (!rt2x00_ring_full(ring))
|
|
ieee80211_wake_queue(rt2x00dev->hw,
|
|
entry->tx_status.control.queue);
|
|
}
|
|
|
|
int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
|
|
struct data_ring *ring, struct sk_buff *skb,
|
|
struct ieee80211_tx_control *control)
|
|
{
|
|
struct usb_device *usb_dev =
|
|
interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
|
|
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
|
|
struct data_entry *entry = rt2x00_get_data_entry(ring);
|
|
u32 length = skb->len;
|
|
|
|
if (rt2x00_ring_full(ring)) {
|
|
ieee80211_stop_queue(rt2x00dev->hw, control->queue);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) {
|
|
ERROR(rt2x00dev,
|
|
"Arrived at non-free entry in the non-full queue %d.\n"
|
|
"Please file bug report to %s.\n",
|
|
control->queue, DRV_PROJECT);
|
|
ieee80211_stop_queue(rt2x00dev->hw, control->queue);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Add the descriptor in front of the skb.
|
|
*/
|
|
skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
|
|
memset(skb->data, 0x00, rt2x00dev->hw->extra_tx_headroom);
|
|
|
|
rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
|
|
ieee80211hdr, length, control);
|
|
memcpy(&entry->tx_status.control, control, sizeof(*control));
|
|
entry->skb = skb;
|
|
|
|
/*
|
|
* Length passed to usb_fill_urb cannot be an odd number,
|
|
* so add 1 byte to make it even.
|
|
*/
|
|
length += rt2x00dev->hw->extra_tx_headroom;
|
|
if (length % 2)
|
|
length++;
|
|
|
|
__set_bit(ENTRY_OWNER_NIC, &entry->flags);
|
|
usb_fill_bulk_urb(entry->priv, usb_dev,
|
|
usb_sndbulkpipe(usb_dev, 1),
|
|
skb->data, length, rt2x00usb_interrupt_txdone, entry);
|
|
usb_submit_urb(entry->priv, GFP_ATOMIC);
|
|
|
|
rt2x00_ring_index_inc(ring);
|
|
|
|
if (rt2x00_ring_full(ring))
|
|
ieee80211_stop_queue(rt2x00dev->hw, control->queue);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
|
|
|
|
/*
|
|
* RX data handlers.
|
|
*/
|
|
static void rt2x00usb_interrupt_rxdone(struct urb *urb)
|
|
{
|
|
struct data_entry *entry = (struct data_entry *)urb->context;
|
|
struct data_ring *ring = entry->ring;
|
|
struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
|
|
struct sk_buff *skb;
|
|
struct rxdata_entry_desc desc;
|
|
int frame_size;
|
|
|
|
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
|
|
!test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
|
|
return;
|
|
|
|
/*
|
|
* Check if the received data is simply too small
|
|
* to be actually valid, or if the urb is signaling
|
|
* a problem.
|
|
*/
|
|
if (urb->actual_length < entry->ring->desc_size || urb->status)
|
|
goto skip_entry;
|
|
|
|
memset(&desc, 0x00, sizeof(desc));
|
|
rt2x00dev->ops->lib->fill_rxdone(entry, &desc);
|
|
|
|
/*
|
|
* Allocate a new sk buffer to replace the current one.
|
|
* If allocation fails, we should drop the current frame
|
|
* so we can recycle the existing sk buffer for the new frame.
|
|
*/
|
|
frame_size = entry->ring->data_size + entry->ring->desc_size;
|
|
skb = dev_alloc_skb(frame_size + NET_IP_ALIGN);
|
|
if (!skb)
|
|
goto skip_entry;
|
|
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
skb_put(skb, frame_size);
|
|
|
|
/*
|
|
* Trim the skb_buffer to only contain the valid
|
|
* frame data (so ignore the device's descriptor).
|
|
*/
|
|
skb_trim(entry->skb, desc.size);
|
|
|
|
/*
|
|
* Send the frame to rt2x00lib for further processing.
|
|
*/
|
|
rt2x00lib_rxdone(entry, entry->skb, &desc);
|
|
|
|
/*
|
|
* Replace current entry's skb with the newly allocated one,
|
|
* and reinitialize the urb.
|
|
*/
|
|
entry->skb = skb;
|
|
urb->transfer_buffer = entry->skb->data;
|
|
urb->transfer_buffer_length = entry->skb->len;
|
|
|
|
skip_entry:
|
|
if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {
|
|
__set_bit(ENTRY_OWNER_NIC, &entry->flags);
|
|
usb_submit_urb(urb, GFP_ATOMIC);
|
|
}
|
|
|
|
rt2x00_ring_index_inc(ring);
|
|
}
|
|
|
|
/*
|
|
* Radio handlers
|
|
*/
|
|
void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct usb_device *usb_dev =
|
|
interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
|
|
struct data_ring *ring;
|
|
struct data_entry *entry;
|
|
unsigned int i;
|
|
|
|
/*
|
|
* Initialize the TX rings
|
|
*/
|
|
txringall_for_each(rt2x00dev, ring) {
|
|
for (i = 0; i < ring->stats.limit; i++)
|
|
ring->entry[i].flags = 0;
|
|
|
|
rt2x00_ring_index_clear(ring);
|
|
}
|
|
|
|
/*
|
|
* Initialize and start the RX ring.
|
|
*/
|
|
rt2x00_ring_index_clear(rt2x00dev->rx);
|
|
|
|
for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
|
|
entry = &rt2x00dev->rx->entry[i];
|
|
|
|
usb_fill_bulk_urb(entry->priv, usb_dev,
|
|
usb_rcvbulkpipe(usb_dev, 1),
|
|
entry->skb->data, entry->skb->len,
|
|
rt2x00usb_interrupt_rxdone, entry);
|
|
|
|
__set_bit(ENTRY_OWNER_NIC, &entry->flags);
|
|
usb_submit_urb(entry->priv, GFP_ATOMIC);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio);
|
|
|
|
void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_ring *ring;
|
|
unsigned int i;
|
|
|
|
rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000,
|
|
REGISTER_TIMEOUT);
|
|
|
|
/*
|
|
* Cancel all rings.
|
|
*/
|
|
ring_for_each(rt2x00dev, ring) {
|
|
for (i = 0; i < ring->stats.limit; i++)
|
|
usb_kill_urb(ring->entry[i].priv);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
|
|
|
|
/*
|
|
* Device initialization handlers.
|
|
*/
|
|
static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
|
|
struct data_ring *ring)
|
|
{
|
|
unsigned int i;
|
|
|
|
/*
|
|
* Allocate the URB's
|
|
*/
|
|
for (i = 0; i < ring->stats.limit; i++) {
|
|
ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!ring->entry[i].priv)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
|
|
struct data_ring *ring)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (!ring->entry)
|
|
return;
|
|
|
|
for (i = 0; i < ring->stats.limit; i++) {
|
|
usb_kill_urb(ring->entry[i].priv);
|
|
usb_free_urb(ring->entry[i].priv);
|
|
if (ring->entry[i].skb)
|
|
kfree_skb(ring->entry[i].skb);
|
|
}
|
|
}
|
|
|
|
int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_ring *ring;
|
|
struct sk_buff *skb;
|
|
unsigned int entry_size;
|
|
unsigned int i;
|
|
int status;
|
|
|
|
/*
|
|
* Allocate DMA
|
|
*/
|
|
ring_for_each(rt2x00dev, ring) {
|
|
status = rt2x00usb_alloc_urb(rt2x00dev, ring);
|
|
if (status)
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* For the RX ring, skb's should be allocated.
|
|
*/
|
|
entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;
|
|
for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
|
|
skb = dev_alloc_skb(NET_IP_ALIGN + entry_size);
|
|
if (!skb)
|
|
goto exit;
|
|
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
skb_put(skb, entry_size);
|
|
|
|
rt2x00dev->rx->entry[i].skb = skb;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit:
|
|
rt2x00usb_uninitialize(rt2x00dev);
|
|
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_initialize);
|
|
|
|
void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
struct data_ring *ring;
|
|
|
|
ring_for_each(rt2x00dev, ring)
|
|
rt2x00usb_free_urb(rt2x00dev, ring);
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize);
|
|
|
|
/*
|
|
* USB driver handlers.
|
|
*/
|
|
static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
kfree(rt2x00dev->rf);
|
|
rt2x00dev->rf = NULL;
|
|
|
|
kfree(rt2x00dev->eeprom);
|
|
rt2x00dev->eeprom = NULL;
|
|
|
|
kfree(rt2x00dev->csr_cache);
|
|
rt2x00dev->csr_cache = NULL;
|
|
}
|
|
|
|
static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev)
|
|
{
|
|
rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);
|
|
if (!rt2x00dev->csr_cache)
|
|
goto exit;
|
|
|
|
rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
|
|
if (!rt2x00dev->eeprom)
|
|
goto exit;
|
|
|
|
rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
|
|
if (!rt2x00dev->rf)
|
|
goto exit;
|
|
|
|
return 0;
|
|
|
|
exit:
|
|
ERROR_PROBE("Failed to allocate registers.\n");
|
|
|
|
rt2x00usb_free_reg(rt2x00dev);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
int rt2x00usb_probe(struct usb_interface *usb_intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
|
|
struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info;
|
|
struct ieee80211_hw *hw;
|
|
struct rt2x00_dev *rt2x00dev;
|
|
int retval;
|
|
|
|
usb_dev = usb_get_dev(usb_dev);
|
|
|
|
hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
|
|
if (!hw) {
|
|
ERROR_PROBE("Failed to allocate hardware.\n");
|
|
retval = -ENOMEM;
|
|
goto exit_put_device;
|
|
}
|
|
|
|
usb_set_intfdata(usb_intf, hw);
|
|
|
|
rt2x00dev = hw->priv;
|
|
rt2x00dev->dev = usb_intf;
|
|
rt2x00dev->ops = ops;
|
|
rt2x00dev->hw = hw;
|
|
|
|
retval = rt2x00usb_alloc_reg(rt2x00dev);
|
|
if (retval)
|
|
goto exit_free_device;
|
|
|
|
retval = rt2x00lib_probe_dev(rt2x00dev);
|
|
if (retval)
|
|
goto exit_free_reg;
|
|
|
|
return 0;
|
|
|
|
exit_free_reg:
|
|
rt2x00usb_free_reg(rt2x00dev);
|
|
|
|
exit_free_device:
|
|
ieee80211_free_hw(hw);
|
|
|
|
exit_put_device:
|
|
usb_put_dev(usb_dev);
|
|
|
|
usb_set_intfdata(usb_intf, NULL);
|
|
|
|
return retval;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_probe);
|
|
|
|
void rt2x00usb_disconnect(struct usb_interface *usb_intf)
|
|
{
|
|
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
|
|
/*
|
|
* Free all allocated data.
|
|
*/
|
|
rt2x00lib_remove_dev(rt2x00dev);
|
|
rt2x00usb_free_reg(rt2x00dev);
|
|
ieee80211_free_hw(hw);
|
|
|
|
/*
|
|
* Free the USB device data.
|
|
*/
|
|
usb_set_intfdata(usb_intf, NULL);
|
|
usb_put_dev(interface_to_usbdev(usb_intf));
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_disconnect);
|
|
|
|
#ifdef CONFIG_PM
|
|
int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state)
|
|
{
|
|
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
int retval;
|
|
|
|
retval = rt2x00lib_suspend(rt2x00dev, state);
|
|
if (retval)
|
|
return retval;
|
|
|
|
rt2x00usb_free_reg(rt2x00dev);
|
|
|
|
/*
|
|
* Decrease usbdev refcount.
|
|
*/
|
|
usb_put_dev(interface_to_usbdev(usb_intf));
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_suspend);
|
|
|
|
int rt2x00usb_resume(struct usb_interface *usb_intf)
|
|
{
|
|
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
|
|
struct rt2x00_dev *rt2x00dev = hw->priv;
|
|
int retval;
|
|
|
|
usb_get_dev(interface_to_usbdev(usb_intf));
|
|
|
|
retval = rt2x00usb_alloc_reg(rt2x00dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = rt2x00lib_resume(rt2x00dev);
|
|
if (retval)
|
|
goto exit_free_reg;
|
|
|
|
return 0;
|
|
|
|
exit_free_reg:
|
|
rt2x00usb_free_reg(rt2x00dev);
|
|
|
|
return retval;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rt2x00usb_resume);
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*
|
|
* rt2x00pci module information.
|
|
*/
|
|
MODULE_AUTHOR(DRV_PROJECT);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DESCRIPTION("rt2x00 library");
|
|
MODULE_LICENSE("GPL");
|