kernel-ark/arch/arm/mach-mx3/mm.c
Uwe Kleine-König a528bc8784 ARM: mx3: introduce SOC_IMX31 and SOC_IMX35
Additionally convert some known to be good usages to the new
names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19 21:54:35 +01:00

133 lines
3.7 KiB
C

/*
* Copyright (C) 1999,2000 Arm Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* - add MX31 specific definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/err.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
/*!
* @file mm.c
*
* @brief This file creates static virtual to physical mappings, common to all MX3 boards.
*
* @ingroup Memory
*/
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
};
/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx31_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
int imx31_register_gpios(void);
void __init mx31_init_irq(void)
{
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
imx31_register_gpios();
}
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
int imx35_register_gpios(void);
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
imx35_register_gpios();
}
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_CACHE_L2X0
static int mxc_init_l2x0(void)
{
void __iomem *l2x0_base;
void __iomem *clkctl_base;
/*
* First of all, we must repair broken chip settings. There are some
* i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
* misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
* Workaraound is to setup the correct register setting prior enabling the
* L2 cache. This should not hurt already working CPUs, as they are using the
* same value
*/
#define L2_MEM_VAL 0x10
clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
if (clkctl_base != NULL) {
writel(0x00000515, clkctl_base + L2_MEM_VAL);
iounmap(clkctl_base);
} else {
pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
}
l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
if (IS_ERR(l2x0_base)) {
printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
PTR_ERR(l2x0_base));
return 0;
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
return 0;
}
arch_initcall(mxc_init_l2x0);
#endif