kernel-ark/drivers/net/wireless/rt2x00/rt2x00reg.h
Ivo van Doorn 2bb057d07a rt2x00: Implement HW encryption
Various rt2x00 devices support hardware encryption.

Most of them require the IV/EIV to be generated by mac80211,
but require it to be provided seperately instead of within
the frame itself. This means that rt2x00lib should extract
the data from the frame and place it in the frame descriptor.
During RX the IV/EIV is provided in the descriptor by the
hardware which means that it should be inserted into the
frame by rt2x00lib.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22 16:29:58 -04:00

254 lines
5.9 KiB
C

/*
Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00
Abstract: rt2x00 generic register information.
*/
#ifndef RT2X00REG_H
#define RT2X00REG_H
/*
* RX crypto status
*/
enum rx_crypto {
RX_CRYPTO_SUCCESS = 0,
RX_CRYPTO_FAIL_ICV = 1,
RX_CRYPTO_FAIL_MIC = 2,
RX_CRYPTO_FAIL_KEY = 3,
};
/*
* Antenna values
*/
enum antenna {
ANTENNA_SW_DIVERSITY = 0,
ANTENNA_A = 1,
ANTENNA_B = 2,
ANTENNA_HW_DIVERSITY = 3,
};
/*
* Led mode values.
*/
enum led_mode {
LED_MODE_DEFAULT = 0,
LED_MODE_TXRX_ACTIVITY = 1,
LED_MODE_SIGNAL_STRENGTH = 2,
LED_MODE_ASUS = 3,
LED_MODE_ALPHA = 4,
};
/*
* TSF sync values
*/
enum tsf_sync {
TSF_SYNC_NONE = 0,
TSF_SYNC_INFRA = 1,
TSF_SYNC_BEACON = 2,
};
/*
* Device states
*/
enum dev_state {
STATE_DEEP_SLEEP = 0,
STATE_SLEEP = 1,
STATE_STANDBY = 2,
STATE_AWAKE = 3,
/*
* Additional device states, these values are
* not strict since they are not directly passed
* into the device.
*/
STATE_RADIO_ON,
STATE_RADIO_OFF,
STATE_RADIO_RX_ON,
STATE_RADIO_RX_OFF,
STATE_RADIO_RX_ON_LINK,
STATE_RADIO_RX_OFF_LINK,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
};
/*
* IFS backoff values
*/
enum ifs {
IFS_BACKOFF = 0,
IFS_SIFS = 1,
IFS_NEW_BACKOFF = 2,
IFS_NONE = 3,
};
/*
* Cipher types for hardware encryption
*/
enum cipher {
CIPHER_NONE = 0,
CIPHER_WEP64 = 1,
CIPHER_WEP128 = 2,
CIPHER_TKIP = 3,
CIPHER_AES = 4,
/*
* The following fields were added by rt61pci and rt73usb.
*/
CIPHER_CKIP64 = 5,
CIPHER_CKIP128 = 6,
CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */
/*
* Max cipher type.
* Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128
* are excluded due to limitations in mac80211.
*/
CIPHER_MAX = 4,
};
/*
* Register handlers.
* We store the position of a register field inside a field structure,
* This will simplify the process of setting and reading a certain field
* inside the register while making sure the process remains byte order safe.
*/
struct rt2x00_field8 {
u8 bit_offset;
u8 bit_mask;
};
struct rt2x00_field16 {
u16 bit_offset;
u16 bit_mask;
};
struct rt2x00_field32 {
u32 bit_offset;
u32 bit_mask;
};
/*
* Power of two check, this will check
* if the mask that has been given contains and contiguous set of bits.
* Note that we cannot use the is_power_of_2() function since this
* check must be done at compile-time.
*/
#define is_power_of_two(x) ( !((x) & ((x)-1)) )
#define low_bit_mask(x) ( ((x)-1) & ~(x) )
#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x))
/*
* Macro's to find first set bit in a variable.
* These macro's behaves the same as the __ffs() function with
* the most important difference that this is done during
* compile-time rather then run-time.
*/
#define compile_ffs2(__x) \
__builtin_choose_expr(((__x) & 0x1), 0, 1)
#define compile_ffs4(__x) \
__builtin_choose_expr(((__x) & 0x3), \
(compile_ffs2((__x))), \
(compile_ffs2((__x) >> 2) + 2))
#define compile_ffs8(__x) \
__builtin_choose_expr(((__x) & 0xf), \
(compile_ffs4((__x))), \
(compile_ffs4((__x) >> 4) + 4))
#define compile_ffs16(__x) \
__builtin_choose_expr(((__x) & 0xff), \
(compile_ffs8((__x))), \
(compile_ffs8((__x) >> 8) + 8))
#define compile_ffs32(__x) \
__builtin_choose_expr(((__x) & 0xffff), \
(compile_ffs16((__x))), \
(compile_ffs16((__x) >> 16) + 16))
/*
* This macro will check the requirements for the FIELD{8,16,32} macros
* The mask should be a constant non-zero contiguous set of bits which
* does not exceed the given typelimit.
*/
#define FIELD_CHECK(__mask, __type) \
BUILD_BUG_ON(!__builtin_constant_p(__mask) || \
!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (__type)(__mask)) \
#define FIELD8(__mask) \
({ \
FIELD_CHECK(__mask, u8); \
(struct rt2x00_field8) { \
compile_ffs8(__mask), (__mask) \
}; \
})
#define FIELD16(__mask) \
({ \
FIELD_CHECK(__mask, u16); \
(struct rt2x00_field16) { \
compile_ffs16(__mask), (__mask) \
}; \
})
#define FIELD32(__mask) \
({ \
FIELD_CHECK(__mask, u32); \
(struct rt2x00_field32) { \
compile_ffs32(__mask), (__mask) \
}; \
})
#define SET_FIELD(__reg, __type, __field, __value)\
({ \
typecheck(__type, __field); \
*(__reg) &= ~((__field).bit_mask); \
*(__reg) |= ((__value) << \
((__field).bit_offset)) & \
((__field).bit_mask); \
})
#define GET_FIELD(__reg, __type, __field) \
({ \
typecheck(__type, __field); \
((__reg) & ((__field).bit_mask)) >> \
((__field).bit_offset); \
})
#define rt2x00_set_field32(__reg, __field, __value) \
SET_FIELD(__reg, struct rt2x00_field32, __field, __value)
#define rt2x00_get_field32(__reg, __field) \
GET_FIELD(__reg, struct rt2x00_field32, __field)
#define rt2x00_set_field16(__reg, __field, __value) \
SET_FIELD(__reg, struct rt2x00_field16, __field, __value)
#define rt2x00_get_field16(__reg, __field) \
GET_FIELD(__reg, struct rt2x00_field16, __field)
#define rt2x00_set_field8(__reg, __field, __value) \
SET_FIELD(__reg, struct rt2x00_field8, __field, __value)
#define rt2x00_get_field8(__reg, __field) \
GET_FIELD(__reg, struct rt2x00_field8, __field)
#endif /* RT2X00REG_H */