davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
6ba54abe62
kernel-ark/drivers/serial/pxa.c
Alan Cox 33f0f88f1c [PATCH] TTY layer buffering revamp 
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.

This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.

When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.

For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).

Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.

The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.

I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.

Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real.  That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.

Description:

tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification].  It
does now also return the number of chars inserted

There are also

tty_buffer_request_room(tty, len)

which asks for a buffer block of the length requested and returns the space
found.  This improves efficiency with hardware that knows how much to
transfer.

and tty_insert_flip_string_flags(tty, str, flags, len)

to insert a string of characters and flags

For a smart interface the usual code is

    len = tty_request_buffer_room(tty, amount_hardware_says);
    tty_insert_flip_string(tty, buffer_from_card, len);

More description!

At the moment tty buffers are attached directly to the tty.  This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)

I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers.  This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.

So far so good.  Lots of drivers reference tty->flip.*.  Several of them also
call directly and unsafely into function pointers it provides.  This will all
break.  Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.

At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say

 int tty_buffer_request_room(tty, size)

Try and ensure at least size bytes are available, returns actual room (may be
zero).  At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative.  (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space.  The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.

 int tty_insert_flip_char(tty, ch, flag)

As before insert a character if there is room.  Now returns 1 for success, 0
for failure.

 int tty_insert_flip_string(tty, str, len)

Insert a block of non error characters.  Returns the number inserted.

 int tty_prepare_flip_string(tty, strptr, len)

Adjust the buffer to allow len characters to be added.  Returns a buffer
pointer in strptr and the length available.  This allows for hardware that
needs to use functions like insl or mencpy_fromio.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:59 -08:00

877 lines
20 KiB
C
Raw Blame History

/*
* linux/drivers/serial/pxa.c
*
* Based on drivers/serial/8250.c by Russell King.
*
* Author: Nicolas Pitre
* Created: Feb 20, 2003
* Copyright: (C) 2003 Monta Vista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Note 1: This driver is made separate from the already too overloaded
* 8250.c because it needs some kirks of its own and that'll make it
* easier to add DMA support.
*
* Note 2: I'm too sick of device allocation policies for serial ports.
* If someone else wants to request an "official" allocation of major/minor
* for this driver please be my guest. And don't forget that new hardware
* to come from Intel might have more than 3 or 4 of those UARTs. Let's
* hope for a better port registration and dynamic device allocation scheme
* with the serial core maintainer satisfaction to appear soon.
*/
#include <linux/config.h>
#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/arch/pxa-regs.h>
struct uart_pxa_port {
struct uart_port port;
unsigned char ier;
unsigned char lcr;
unsigned char mcr;
unsigned int lsr_break_flag;
unsigned int cken;
char *name;
};
static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
{
offset <<= 2;
return readl(up->port.membase + offset);
}
static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
{
offset <<= 2;
writel(value, up->port.membase + offset);
}
static void serial_pxa_enable_ms(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
}
static void serial_pxa_stop_tx(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
if (up->ier & UART_IER_THRI) {
up->ier &= ~UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
}
static void serial_pxa_stop_rx(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
}
static inline void
receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
{
struct tty_struct *tty = up->port.info->tty;
unsigned int ch, flag;
int max_count = 256;
do {
ch = serial_in(up, UART_RX);
flag = TTY_NORMAL;
up->port.icount.rx++;
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
UART_LSR_FE | UART_LSR_OE))) {
/*
* For statistics only
*/
if (*status & UART_LSR_BI) {
*status &= ~(UART_LSR_FE | UART_LSR_PE);
up->port.icount.brk++;
/*
* We do the SysRQ and SAK checking
* here because otherwise the break
* may get masked by ignore_status_mask
* or read_status_mask.
*/
if (uart_handle_break(&up->port))
goto ignore_char;
} else if (*status & UART_LSR_PE)
up->port.icount.parity++;
else if (*status & UART_LSR_FE)
up->port.icount.frame++;
if (*status & UART_LSR_OE)
up->port.icount.overrun++;
/*
* Mask off conditions which should be ignored.
*/
*status &= up->port.read_status_mask;
#ifdef CONFIG_SERIAL_PXA_CONSOLE
if (up->port.line == up->port.cons->index) {
/* Recover the break flag from console xmit */
*status |= up->lsr_break_flag;
up->lsr_break_flag = 0;
}
#endif
if (*status & UART_LSR_BI) {
flag = TTY_BREAK;
} else if (*status & UART_LSR_PE)
flag = TTY_PARITY;
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
tty_flip_buffer_push(tty);
}
static void transmit_chars(struct uart_pxa_port *up)
{
struct circ_buf *xmit = &up->port.info->xmit;
int count;
if (up->port.x_char) {
serial_out(up, UART_TX, up->port.x_char);
up->port.icount.tx++;
up->port.x_char = 0;
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
serial_pxa_stop_tx(&up->port);
return;
}
count = up->port.fifosize / 2;
do {
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
up->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
if (uart_circ_empty(xmit))
serial_pxa_stop_tx(&up->port);
}
static void serial_pxa_start_tx(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
}
static inline void check_modem_status(struct uart_pxa_port *up)
{
int status;
status = serial_in(up, UART_MSR);
if ((status & UART_MSR_ANY_DELTA) == 0)
return;
if (status & UART_MSR_TERI)
up->port.icount.rng++;
if (status & UART_MSR_DDSR)
up->port.icount.dsr++;
if (status & UART_MSR_DDCD)
uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
if (status & UART_MSR_DCTS)
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
wake_up_interruptible(&up->port.info->delta_msr_wait);
}
/*
* This handles the interrupt from one port.
*/
static inline irqreturn_t
serial_pxa_irq(int irq, void *dev_id, struct pt_regs *regs)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)dev_id;
unsigned int iir, lsr;
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT)
return IRQ_NONE;
lsr = serial_in(up, UART_LSR);
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr, regs);
check_modem_status(up);
if (lsr & UART_LSR_THRE)
transmit_chars(up);
return IRQ_HANDLED;
}
static unsigned int serial_pxa_tx_empty(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned long flags;
unsigned int ret;
spin_lock_irqsave(&up->port.lock, flags);
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
spin_unlock_irqrestore(&up->port.lock, flags);
return ret;
}
static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned char status;
unsigned int ret;
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
status = serial_in(up, UART_MSR);
ret = 0;
if (status & UART_MSR_DCD)
ret |= TIOCM_CAR;
if (status & UART_MSR_RI)
ret |= TIOCM_RNG;
if (status & UART_MSR_DSR)
ret |= TIOCM_DSR;
if (status & UART_MSR_CTS)
ret |= TIOCM_CTS;
return ret;
}
static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned char mcr = 0;
if (mctrl & TIOCM_RTS)
mcr |= UART_MCR_RTS;
if (mctrl & TIOCM_DTR)
mcr |= UART_MCR_DTR;
if (mctrl & TIOCM_OUT1)
mcr |= UART_MCR_OUT1;
if (mctrl & TIOCM_OUT2)
mcr |= UART_MCR_OUT2;
if (mctrl & TIOCM_LOOP)
mcr |= UART_MCR_LOOP;
mcr |= up->mcr;
serial_out(up, UART_MCR, mcr);
}
static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
if (break_state == -1)
up->lcr |= UART_LCR_SBC;
else
up->lcr &= ~UART_LCR_SBC;
serial_out(up, UART_LCR, up->lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
}
#if 0
static void serial_pxa_dma_init(struct pxa_uart *up)
{
up->rxdma =
pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
if (up->rxdma < 0)
goto out;
up->txdma =
pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
if (up->txdma < 0)
goto err_txdma;
up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
if (!up->dmadesc)
goto err_alloc;
/* ... */
err_alloc:
pxa_free_dma(up->txdma);
err_rxdma:
pxa_free_dma(up->rxdma);
out:
return;
}
#endif
static int serial_pxa_startup(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned long flags;
int retval;
if (port->line == 3) /* HWUART */
up->mcr |= UART_MCR_AFE;
else
up->mcr = 0;
/*
* Allocate the IRQ
*/
retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
if (retval)
return retval;
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
*/
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
serial_out(up, UART_FCR, 0);
/*
* Clear the interrupt registers.
*/
(void) serial_in(up, UART_LSR);
(void) serial_in(up, UART_RX);
(void) serial_in(up, UART_IIR);
(void) serial_in(up, UART_MSR);
/*
* Now, initialize the UART
*/
serial_out(up, UART_LCR, UART_LCR_WLEN8);
spin_lock_irqsave(&up->port.lock, flags);
up->port.mctrl |= TIOCM_OUT2;
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
spin_unlock_irqrestore(&up->port.lock, flags);
/*
* Finally, enable interrupts. Note: Modem status interrupts
* are set via set_termios(), which will be occuring imminently
* anyway, so we don't enable them here.
*/
up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
serial_out(up, UART_IER, up->ier);
/*
* And clear the interrupt registers again for luck.
*/
(void) serial_in(up, UART_LSR);
(void) serial_in(up, UART_RX);
(void) serial_in(up, UART_IIR);
(void) serial_in(up, UART_MSR);
return 0;
}
static void serial_pxa_shutdown(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned long flags;
free_irq(up->port.irq, up);
/*
* Disable interrupts from this port
*/
up->ier = 0;
serial_out(up, UART_IER, 0);
spin_lock_irqsave(&up->port.lock, flags);
up->port.mctrl &= ~TIOCM_OUT2;
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
spin_unlock_irqrestore(&up->port.lock, flags);
/*
* Disable break condition and FIFOs
*/
serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR |
UART_FCR_CLEAR_XMIT);
serial_out(up, UART_FCR, 0);
}
static void
serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
struct termios *old)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
switch (termios->c_cflag & CSIZE) {
case CS5:
cval = UART_LCR_WLEN5;
break;
case CS6:
cval = UART_LCR_WLEN6;
break;
case CS7:
cval = UART_LCR_WLEN7;
break;
default:
case CS8:
cval = UART_LCR_WLEN8;
break;
}
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
if (termios->c_cflag & PARENB)
cval |= UART_LCR_PARITY;
if (!(termios->c_cflag & PARODD))
cval |= UART_LCR_EPAR;
/*
* Ask the core to calculate the divisor for us.
*/
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
else if ((up->port.uartclk / quot) < (230400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
else
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
/*
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
spin_lock_irqsave(&up->port.lock, flags);
/*
* Ensure the port will be enabled.
* This is required especially for serial console.
*/
up->ier |= IER_UUE;
/*
* Update the per-port timeout.
*/
uart_update_timeout(port, termios->c_cflag, baud);
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
if (termios->c_iflag & INPCK)
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
if (termios->c_iflag & (BRKINT | PARMRK))
up->port.read_status_mask |= UART_LSR_BI;
/*
* Characters to ignore
*/
up->port.ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
if (termios->c_iflag & IGNBRK) {
up->port.ignore_status_mask |= UART_LSR_BI;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
up->port.ignore_status_mask |= UART_LSR_OE;
}
/*
* ignore all characters if CREAD is not set
*/
if ((termios->c_cflag & CREAD) == 0)
up->port.ignore_status_mask |= UART_LSR_DR;
/*
* CTS flow control flag and modem status interrupts
*/
up->ier &= ~UART_IER_MSI;
if (UART_ENABLE_MS(&up->port, termios->c_cflag))
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
serial_out(up, UART_LCR, cval); /* reset DLAB */
up->lcr = cval; /* Save LCR */
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
serial_out(up, UART_FCR, fcr);
spin_unlock_irqrestore(&up->port.lock, flags);
}
static void
serial_pxa_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
pxa_set_cken(up->cken, !state);
if (!state)
udelay(1);
}
static void serial_pxa_release_port(struct uart_port *port)
{
}
static int serial_pxa_request_port(struct uart_port *port)
{
return 0;
}
static void serial_pxa_config_port(struct uart_port *port, int flags)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
up->port.type = PORT_PXA;
}
static int
serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
{
/* we don't want the core code to modify any port params */
return -EINVAL;
}
static const char *
serial_pxa_type(struct uart_port *port)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
return up->name;
}
#ifdef CONFIG_SERIAL_PXA_CONSOLE
static struct uart_pxa_port serial_pxa_ports[];
static struct uart_driver serial_pxa_reg;
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
/*
* Wait for transmitter & holding register to empty
*/
static inline void wait_for_xmitr(struct uart_pxa_port *up)
{
unsigned int status, tmout = 10000;
/* Wait up to 10ms for the character(s) to be sent. */
do {
status = serial_in(up, UART_LSR);
if (status & UART_LSR_BI)
up->lsr_break_flag = UART_LSR_BI;
if (--tmout == 0)
break;
udelay(1);
} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
tmout = 1000000;
while (--tmout &&
((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
udelay(1);
}
}
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
*
* The console_lock must be held when we get here.
*/
static void
serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_pxa_port *up = &serial_pxa_ports[co->index];
unsigned int ier;
int i;
/*
* First save the IER then disable the interrupts
*/
ier = serial_in(up, UART_IER);
serial_out(up, UART_IER, UART_IER_UUE);
/*
* Now, do each character
*/
for (i = 0; i < count; i++, s++) {
wait_for_xmitr(up);
/*
* Send the character out.
* If a LF, also do CR...
*/
serial_out(up, UART_TX, *s);
if (*s == 10) {
wait_for_xmitr(up);
serial_out(up, UART_TX, 13);
}
}
/*
* Finally, wait for transmitter to become empty
* and restore the IER
*/
wait_for_xmitr(up);
serial_out(up, UART_IER, ier);
}
static int __init
serial_pxa_console_setup(struct console *co, char *options)
{
struct uart_pxa_port *up;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (co->index == -1 || co->index >= serial_pxa_reg.nr)
co->index = 0;
up = &serial_pxa_ports[co->index];
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(&up->port, co, baud, parity, bits, flow);
}
static struct console serial_pxa_console = {
.name = "ttyS",
.write = serial_pxa_console_write,
.device = uart_console_device,
.setup = serial_pxa_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &serial_pxa_reg,
};
static int __init
serial_pxa_console_init(void)
{
register_console(&serial_pxa_console);
return 0;
}
console_initcall(serial_pxa_console_init);
#define PXA_CONSOLE &serial_pxa_console
#else
#define PXA_CONSOLE NULL
#endif
struct uart_ops serial_pxa_pops = {
.tx_empty = serial_pxa_tx_empty,
.set_mctrl = serial_pxa_set_mctrl,
.get_mctrl = serial_pxa_get_mctrl,
.stop_tx = serial_pxa_stop_tx,
.start_tx = serial_pxa_start_tx,
.stop_rx = serial_pxa_stop_rx,
.enable_ms = serial_pxa_enable_ms,
.break_ctl = serial_pxa_break_ctl,
.startup = serial_pxa_startup,
.shutdown = serial_pxa_shutdown,
.set_termios = serial_pxa_set_termios,
.pm = serial_pxa_pm,
.type = serial_pxa_type,
.release_port = serial_pxa_release_port,
.request_port = serial_pxa_request_port,
.config_port = serial_pxa_config_port,
.verify_port = serial_pxa_verify_port,
};
static struct uart_pxa_port serial_pxa_ports[] = {
{ /* FFUART */
.name = "FFUART",
.cken = CKEN6_FFUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&FFUART,
.mapbase = __PREG(FFUART),
.irq = IRQ_FFUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 0,
},
}, { /* BTUART */
.name = "BTUART",
.cken = CKEN7_BTUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&BTUART,
.mapbase = __PREG(BTUART),
.irq = IRQ_BTUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 1,
},
}, { /* STUART */
.name = "STUART",
.cken = CKEN5_STUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&STUART,
.mapbase = __PREG(STUART),
.irq = IRQ_STUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 2,
},
}, { /* HWUART */
.name = "HWUART",
.cken = CKEN4_HWUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&HWUART,
.mapbase = __PREG(HWUART),
.irq = IRQ_HWUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 3,
},
}
};
static struct uart_driver serial_pxa_reg = {
.owner = THIS_MODULE,
.driver_name = "PXA serial",
.devfs_name = "tts/",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.nr = ARRAY_SIZE(serial_pxa_ports),
.cons = PXA_CONSOLE,
};
static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
{
struct uart_pxa_port *sport = platform_get_drvdata(dev);
if (sport)
uart_suspend_port(&serial_pxa_reg, &sport->port);
return 0;
}
static int serial_pxa_resume(struct platform_device *dev)
{
struct uart_pxa_port *sport = platform_get_drvdata(dev);
if (sport)
uart_resume_port(&serial_pxa_reg, &sport->port);
return 0;
}
static int serial_pxa_probe(struct platform_device *dev)
{
serial_pxa_ports[dev->id].port.dev = &dev->dev;
uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
return 0;
}
static int serial_pxa_remove(struct platform_device *dev)
{
struct uart_pxa_port *sport = platform_get_drvdata(dev);
platform_set_drvdata(dev, NULL);
if (sport)
uart_remove_one_port(&serial_pxa_reg, &sport->port);
return 0;
}
static struct platform_driver serial_pxa_driver = {
.probe = serial_pxa_probe,
.remove = serial_pxa_remove,
.suspend = serial_pxa_suspend,
.resume = serial_pxa_resume,
.driver = {
.name = "pxa2xx-uart",
},
};
int __init serial_pxa_init(void)
{
int ret;
ret = uart_register_driver(&serial_pxa_reg);
if (ret != 0)
return ret;
ret = platform_driver_register(&serial_pxa_driver);
if (ret != 0)
uart_unregister_driver(&serial_pxa_reg);
return ret;
}
void __exit serial_pxa_exit(void)
{
platform_driver_unregister(&serial_pxa_driver);
uart_unregister_driver(&serial_pxa_reg);
}
module_init(serial_pxa_init);
module_exit(serial_pxa_exit);
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink