kernel-ark/arch/arm/plat-mxc/irq.c
Sascha Hauer 84c9fa4304 mxc irq: make architecture runtime dependent
Currently we depend on hardcoded base addresses for the interrupt
controller. This prevents us from compiling in more than one i.MX
architecture at a time. This patch changes the base address to a
runtime calculated one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:45 +02:00

156 lines
4.5 KiB
C

/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#define AVIC_INTCNTL 0x00 /* int control reg */
#define AVIC_NIMASK 0x04 /* int mask reg */
#define AVIC_INTENNUM 0x08 /* int enable number reg */
#define AVIC_INTDISNUM 0x0C /* int disable number reg */
#define AVIC_INTENABLEH 0x10 /* int enable reg high */
#define AVIC_INTENABLEL 0x14 /* int enable reg low */
#define AVIC_INTTYPEH 0x18 /* int type reg high */
#define AVIC_INTTYPEL 0x1C /* int type reg low */
#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */
#define AVIC_NIVECSR 0x40 /* norm int vector/status */
#define AVIC_FIVECSR 0x44 /* fast int vector/status */
#define AVIC_INTSRCH 0x48 /* int source reg high */
#define AVIC_INTSRCL 0x4C /* int source reg low */
#define AVIC_INTFRCH 0x50 /* int force reg high */
#define AVIC_INTFRCL 0x54 /* int force reg low */
#define AVIC_NIPNDH 0x58 /* norm int pending high */
#define AVIC_NIPNDL 0x5C /* norm int pending low */
#define AVIC_FIPNDH 0x60 /* fast int pending high */
#define AVIC_FIPNDL 0x64 /* fast int pending low */
static void __iomem *avic_base;
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
#ifdef CONFIG_MXC_IRQ_PRIOR
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
if (irq >= MXC_INTERNAL_IRQS)
return -EINVAL;;
temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
return 0;
#else
return -ENOSYS;
#endif
}
EXPORT_SYMBOL(imx_irq_set_priority);
#ifdef CONFIG_FIQ
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
{
unsigned int irqt;
if (irq >= MXC_INTERNAL_IRQS)
return -EINVAL;
if (irq < MXC_INTERNAL_IRQS / 2) {
irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
} else {
irq -= MXC_INTERNAL_IRQS / 2;
irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
}
return 0;
}
EXPORT_SYMBOL(mxc_set_irq_fiq);
#endif /* CONFIG_FIQ */
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
__raw_writel(irq, avic_base + AVIC_INTDISNUM);
}
/* Enable interrupt number "irq" in the AVIC */
static void mxc_unmask_irq(unsigned int irq)
{
__raw_writel(irq, avic_base + AVIC_INTENNUM);
}
static struct irq_chip mxc_avic_chip = {
.ack = mxc_mask_irq,
.mask = mxc_mask_irq,
.unmask = mxc_unmask_irq,
};
/*
* This function initializes the AVIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
void __init mxc_init_irq(void)
{
int i;
avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
/* put the AVIC into the reset value with
* all interrupts disabled
*/
__raw_writel(0, avic_base + AVIC_INTCNTL);
__raw_writel(0x1f, avic_base + AVIC_NIMASK);
/* disable all interrupts */
__raw_writel(0, avic_base + AVIC_INTENABLEH);
__raw_writel(0, avic_base + AVIC_INTENABLEL);
/* all IRQ no FIQ */
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
set_irq_chip(i, &mxc_avic_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
/* init architectures chained interrupt handler */
mxc_register_gpios();
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ();
#endif
printk(KERN_INFO "MXC IRQ initialized\n");
}