kernel-ark/drivers/i2c/busses/i2c-powermac.c
Jean Delvare 8e4b980c28 i2c-powermac: Be less verbose in the absence of real errors.
Be less verbose in the absence of real errors. We don't have to report
failed probes to the users, it's only confusing them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Andrey Gusev <ronne@list.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@kernel.org
2010-03-13 20:56:52 +01:00

342 lines
8.7 KiB
C

/*
i2c Support for Apple SMU Controller
Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
<benh@kernel.crashing.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <asm/prom.h>
#include <asm/pmac_low_i2c.h>
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
MODULE_LICENSE("GPL");
/*
* SMBUS-type transfer entrypoint
*/
static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
u16 addr,
unsigned short flags,
char read_write,
u8 command,
int size,
union i2c_smbus_data* data)
{
struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
int rc = 0;
int read = (read_write == I2C_SMBUS_READ);
int addrdir = (addr << 1) | read;
int mode, subsize, len;
u32 subaddr;
u8 *buf;
u8 local[2];
if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) {
mode = pmac_i2c_mode_std;
subsize = 0;
subaddr = 0;
} else {
mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub;
subsize = 1;
subaddr = command;
}
switch (size) {
case I2C_SMBUS_QUICK:
buf = NULL;
len = 0;
break;
case I2C_SMBUS_BYTE:
case I2C_SMBUS_BYTE_DATA:
buf = &data->byte;
len = 1;
break;
case I2C_SMBUS_WORD_DATA:
if (!read) {
local[0] = data->word & 0xff;
local[1] = (data->word >> 8) & 0xff;
}
buf = local;
len = 2;
break;
/* Note that these are broken vs. the expected smbus API where
* on reads, the length is actually returned from the function,
* but I think the current API makes no sense and I don't want
* any driver that I haven't verified for correctness to go
* anywhere near a pmac i2c bus anyway ...
*
* I'm also not completely sure what kind of phases to do between
* the actual command and the data (what I am _supposed_ to do that
* is). For now, I assume writes are a single stream and reads have
* a repeat start/addr phase (but not stop in between)
*/
case I2C_SMBUS_BLOCK_DATA:
buf = data->block;
len = data->block[0] + 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
buf = &data->block[1];
len = data->block[0];
break;
default:
return -EINVAL;
}
rc = pmac_i2c_open(bus, 0);
if (rc) {
dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
return rc;
}
rc = pmac_i2c_setmode(bus, mode);
if (rc) {
dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
mode, rc);
goto bail;
}
rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
if (rc) {
if (rc == -ENXIO)
dev_dbg(&adap->dev,
"I2C transfer at 0x%02x failed, size %d, "
"err %d\n", addrdir >> 1, size, rc);
else
dev_err(&adap->dev,
"I2C transfer at 0x%02x failed, size %d, "
"err %d\n", addrdir >> 1, size, rc);
goto bail;
}
if (size == I2C_SMBUS_WORD_DATA && read) {
data->word = ((u16)local[1]) << 8;
data->word |= local[0];
}
bail:
pmac_i2c_close(bus);
return rc;
}
/*
* Generic i2c master transfer entrypoint. This driver only support single
* messages (for "lame i2c" transfers). Anything else should use the smbus
* entry point
*/
static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
struct i2c_msg *msgs,
int num)
{
struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
int rc = 0;
int read;
int addrdir;
if (num != 1) {
dev_err(&adap->dev,
"Multi-message I2C transactions not supported\n");
return -EOPNOTSUPP;
}
if (msgs->flags & I2C_M_TEN)
return -EINVAL;
read = (msgs->flags & I2C_M_RD) != 0;
addrdir = (msgs->addr << 1) | read;
rc = pmac_i2c_open(bus, 0);
if (rc) {
dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
return rc;
}
rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
if (rc) {
dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
pmac_i2c_mode_std, rc);
goto bail;
}
rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
if (rc < 0) {
if (rc == -ENXIO)
dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
addrdir & 1 ? "read from" : "write to",
addrdir >> 1, rc);
else
dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
addrdir & 1 ? "read from" : "write to",
addrdir >> 1, rc);
}
bail:
pmac_i2c_close(bus);
return rc < 0 ? rc : 1;
}
static u32 i2c_powermac_func(struct i2c_adapter * adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
}
/* For now, we only handle smbus */
static const struct i2c_algorithm i2c_powermac_algorithm = {
.smbus_xfer = i2c_powermac_smbus_xfer,
.master_xfer = i2c_powermac_master_xfer,
.functionality = i2c_powermac_func,
};
static int __devexit i2c_powermac_remove(struct platform_device *dev)
{
struct i2c_adapter *adapter = platform_get_drvdata(dev);
int rc;
rc = i2c_del_adapter(adapter);
/* We aren't that prepared to deal with this... */
if (rc)
printk(KERN_WARNING
"i2c-powermac.c: Failed to remove bus %s !\n",
adapter->name);
platform_set_drvdata(dev, NULL);
memset(adapter, 0, sizeof(*adapter));
return 0;
}
static int __devinit i2c_powermac_probe(struct platform_device *dev)
{
struct pmac_i2c_bus *bus = dev->dev.platform_data;
struct device_node *parent = NULL;
struct i2c_adapter *adapter;
const char *basename;
int rc;
if (bus == NULL)
return -EINVAL;
adapter = pmac_i2c_get_adapter(bus);
/* Ok, now we need to make up a name for the interface that will
* match what we used to do in the past, that is basically the
* controller's parent device node for keywest. PMU didn't have a
* naming convention and SMU has a different one
*/
switch(pmac_i2c_get_type(bus)) {
case pmac_i2c_bus_keywest:
parent = of_get_parent(pmac_i2c_get_controller(bus));
if (parent == NULL)
return -EINVAL;
basename = parent->name;
break;
case pmac_i2c_bus_pmu:
basename = "pmu";
break;
case pmac_i2c_bus_smu:
/* This is not what we used to do but I'm fixing drivers at
* the same time as this change
*/
basename = "smu";
break;
default:
return -EINVAL;
}
snprintf(adapter->name, sizeof(adapter->name), "%s %d", basename,
pmac_i2c_get_channel(bus));
of_node_put(parent);
platform_set_drvdata(dev, adapter);
adapter->algo = &i2c_powermac_algorithm;
i2c_set_adapdata(adapter, bus);
adapter->dev.parent = &dev->dev;
rc = i2c_add_adapter(adapter);
if (rc) {
printk(KERN_ERR "i2c-powermac: Adapter %s registration "
"failed\n", adapter->name);
memset(adapter, 0, sizeof(*adapter));
}
printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
if (!strncmp(basename, "uni-n", 5)) {
struct device_node *np;
const u32 *prop;
struct i2c_board_info info;
/* Instantiate I2C motion sensor if present */
np = of_find_node_by_name(NULL, "accelerometer");
if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") &&
(prop = of_get_property(np, "reg", NULL))) {
int i2c_bus;
const char *tmp_bus;
/* look for bus either using "reg" or by path */
tmp_bus = strstr(np->full_name, "/i2c-bus@");
if (tmp_bus)
i2c_bus = *(tmp_bus + 9) - '0';
else
i2c_bus = ((*prop) >> 8) & 0x0f;
if (pmac_i2c_get_channel(bus) == i2c_bus) {
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = ((*prop) & 0xff) >> 1;
strlcpy(info.type, "ams", I2C_NAME_SIZE);
i2c_new_device(adapter, &info);
}
}
}
return rc;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c-powermac");
static struct platform_driver i2c_powermac_driver = {
.probe = i2c_powermac_probe,
.remove = __devexit_p(i2c_powermac_remove),
.driver = {
.name = "i2c-powermac",
.bus = &platform_bus_type,
},
};
static int __init i2c_powermac_init(void)
{
platform_driver_register(&i2c_powermac_driver);
return 0;
}
static void __exit i2c_powermac_cleanup(void)
{
platform_driver_unregister(&i2c_powermac_driver);
}
module_init(i2c_powermac_init);
module_exit(i2c_powermac_cleanup);