kernel-ark/drivers/video/sis/initdef.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

672 lines
25 KiB
C

/* $XFree86$ */
/* $XdotOrg$ */
/*
* Global definitions for init.c and init301.c
*
* Copyright (C) 2001-2004 by Thomas Winischhofer, Vienna, Austria
*
* If distributed as part of the Linux kernel, the following license terms
* apply:
*
* * This program is free software; you can redistribute it and/or modify
* * it under the terms of the GNU General Public License as published by
* * the Free Software Foundation; either version 2 of the named License,
* * or any later version.
* *
* * This program is distributed in the hope that it will be useful,
* * but WITHOUT ANY WARRANTY; without even the implied warranty of
* * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* * GNU General Public License for more details.
* *
* * You should have received a copy of the GNU General Public License
* * along with this program; if not, write to the Free Software
* * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*
* Otherwise, the following license terms apply:
*
* * Redistribution and use in source and binary forms, with or without
* * modification, are permitted provided that the following conditions
* * are met:
* * 1) Redistributions of source code must retain the above copyright
* * notice, this list of conditions and the following disclaimer.
* * 2) Redistributions in binary form must reproduce the above copyright
* * notice, this list of conditions and the following disclaimer in the
* * documentation and/or other materials provided with the distribution.
* * 3) The name of the author may not be used to endorse or promote products
* * derived from this software without specific prior written permission.
* *
* * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Author: Thomas Winischhofer <thomas@winischhofer.net>
*
*/
#ifndef _INITDEF_
#define _INITDEF_
#define IS_SIS330 (HwInfo->jChipType == SIS_330)
#define IS_SIS550 (HwInfo->jChipType == SIS_550)
#define IS_SIS650 (HwInfo->jChipType == SIS_650) /* All versions, incl 651, M65x */
#define IS_SIS740 (HwInfo->jChipType == SIS_740)
#define IS_SIS651 (SiS_Pr->SiS_SysFlags & (SF_Is651 | SF_Is652))
#define IS_SISM650 (SiS_Pr->SiS_SysFlags & (SF_IsM650 | SF_IsM652 | SF_IsM653))
#define IS_SIS65x (IS_SIS651 || IS_SISM650) /* Only special versions of 65x */
#define IS_SIS661 (HwInfo->jChipType == SIS_661)
#define IS_SIS741 (HwInfo->jChipType == SIS_741)
#define IS_SIS660 (HwInfo->jChipType == SIS_660)
#define IS_SIS760 (HwInfo->jChipType == SIS_760)
#define IS_SIS661741660760 (IS_SIS661 || IS_SIS741 || IS_SIS660 || IS_SIS760)
#define IS_SIS650740 ((HwInfo->jChipType >= SIS_650) && (HwInfo->jChipType < SIS_330))
#define IS_SIS550650740 (IS_SIS550 || IS_SIS650740)
#define IS_SIS650740660 (IS_SIS650 || IS_SIS740 || IS_SIS661741660760)
#define IS_SIS550650740660 (IS_SIS550 || IS_SIS650740660)
#define SISGETROMW(x) (ROMAddr[(x)] | (ROMAddr[(x)+1] << 8))
/* SiS_VBType */
#define VB_SIS301 0x0001
#define VB_SIS301B 0x0002
#define VB_SIS302B 0x0004
#define VB_SIS301LV 0x0008
#define VB_SIS302LV 0x0010
#define VB_SIS302ELV 0x0020
#define VB_SIS301C 0x0040
#define VB_UMC 0x4000
#define VB_NoLCD 0x8000
#define VB_SIS301BLV302BLV (VB_SIS301B|VB_SIS301C|VB_SIS302B|VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
#define VB_SIS301B302B (VB_SIS301B|VB_SIS301C|VB_SIS302B)
#define VB_SIS301LV302LV (VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
#define VB_SISVB (VB_SIS301 | VB_SIS301BLV302BLV)
#define VB_SISTMDS (VB_SIS301 | VB_SIS301B302B)
#define VB_SISLVDS VB_SIS301LV302LV
#define VB_SISLCDA (VB_SIS302B|VB_SIS301C|VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
#define VB_SISYPBPR (VB_SIS301C|VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
#define VB_SISHIVISION (VB_SIS301|VB_SIS301B|VB_SIS302B)
/* VBInfo */
#define SetSimuScanMode 0x0001 /* CR 30 */
#define SwitchCRT2 0x0002
#define SetCRT2ToAVIDEO 0x0004
#define SetCRT2ToSVIDEO 0x0008
#define SetCRT2ToSCART 0x0010
#define SetCRT2ToLCD 0x0020
#define SetCRT2ToRAMDAC 0x0040
#define SetCRT2ToHiVision 0x0080 /* for SiS bridge */
#define SetCRT2ToCHYPbPr SetCRT2ToHiVision /* for Chrontel */
#define SetNTSCTV 0x0000 /* CR 31 */
#define SetPALTV 0x0100 /* Deprecated here, now in TVMode */
#define SetInSlaveMode 0x0200
#define SetNotSimuMode 0x0400
#define SetNotSimuTVMode SetNotSimuMode
#define SetDispDevSwitch 0x0800
#define SetCRT2ToYPbPr525750 0x0800
#define LoadDACFlag 0x1000
#define DisableCRT2Display 0x2000
#define DriverMode 0x4000
#define HotKeySwitch 0x8000
#define SetCRT2ToLCDA 0x8000
/* v-- Needs change in sis_vga.c if changed (GPIO) --v */
#define SetCRT2ToTV (SetCRT2ToYPbPr525750|SetCRT2ToHiVision|SetCRT2ToSCART|SetCRT2ToSVIDEO|SetCRT2ToAVIDEO)
#define SetCRT2ToTVNoYPbPrHiVision (SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)
#define SetCRT2ToTVNoHiVision (SetCRT2ToYPbPr525750 | SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)
/* SiS_ModeType */
#define ModeText 0x00
#define ModeCGA 0x01
#define ModeEGA 0x02
#define ModeVGA 0x03
#define Mode15Bpp 0x04
#define Mode16Bpp 0x05
#define Mode24Bpp 0x06
#define Mode32Bpp 0x07
#define ModeTypeMask 0x07
#define IsTextMode 0x07
#define DACInfoFlag 0x0018
#define MemoryInfoFlag 0x01E0
#define MemorySizeShift 5
/* modeflag */
#define Charx8Dot 0x0200
#define LineCompareOff 0x0400
#define CRT2Mode 0x0800
#define HalfDCLK 0x1000
#define NoSupportSimuTV 0x2000
#define NoSupportLCDScale 0x4000 /* SiS bridge: No scaling possible (no matter what panel) */
#define DoubleScanMode 0x8000
/* Infoflag */
#define SupportTV 0x0008
#define SupportTV1024 0x0800
#define SupportCHTV 0x0800
#define Support64048060Hz 0x0800 /* Special for 640x480 LCD */
#define SupportHiVision 0x0010
#define SupportYPbPr750p 0x1000
#define SupportLCD 0x0020
#define SupportRAMDAC2 0x0040 /* All (<= 100Mhz) */
#define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */
#define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */
#define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */
#define InterlaceMode 0x0080
#define SyncPP 0x0000
#define SyncPN 0x4000
#define SyncNP 0x8000
#define SyncNN 0xc000
/* SetFlag */
#define ProgrammingCRT2 0x0001
#define LowModeTests 0x0002
/* #define TVSimuMode 0x0002 - deprecated */
/* #define RPLLDIV2XO 0x0004 - deprecated */
#define LCDVESATiming 0x0008
#define EnableLVDSDDA 0x0010
#define SetDispDevSwitchFlag 0x0020
#define CheckWinDos 0x0040
#define SetDOSMode 0x0080
/* TVMode flag */
#define TVSetPAL 0x0001
#define TVSetNTSCJ 0x0002
#define TVSetPALM 0x0004
#define TVSetPALN 0x0008
#define TVSetCHOverScan 0x0010
#define TVSetYPbPr525i 0x0020 /* new 0x10 */
#define TVSetYPbPr525p 0x0040 /* new 0x20 */
#define TVSetYPbPr750p 0x0080 /* new 0x40 */
#define TVSetHiVision 0x0100 /* new 0x80; = 1080i, software-wise identical */
#define TVSetTVSimuMode 0x0200 /* new 0x200, prev. 0x800 */
#define TVRPLLDIV2XO 0x0400 /* prev 0x1000 */
#define TVSetNTSC1024 0x0800 /* new 0x100, prev. 0x2000 */
#define TVAspect43 0x2000
#define TVAspect169 0x4000
#define TVAspect43LB 0x8000
/* YPbPr flag (>=315, <661; converted to TVMode) */
#define YPbPr525p 0x0001
#define YPbPr750p 0x0002
#define YPbPr525i 0x0004
#define YPbPrHiVision 0x0008
#define YPbPrModeMask (YPbPr750p | YPbPr525p | YPbPr525i | YPbPrHiVision)
/* SysFlags (to identify special versions) */
#define SF_Is651 0x0001
#define SF_IsM650 0x0002
#define SF_Is652 0x0004
#define SF_IsM652 0x0008
#define SF_IsM653 0x0010
#define SF_IsM661 0x0020
#define SF_IsM741 0x0040
#define SF_IsM760 0x0080
#define SF_760LFB 0x8000 /* 760: We have LFB */
/* CR32 (Newer 630, and 315 series)
[0] VB connected with CVBS
[1] VB connected with SVHS
[2] VB connected with SCART
[3] VB connected with LCD
[4] VB connected with CRT2 (secondary VGA)
[5] CRT1 monitor is connected
[6] VB connected with Hi-Vision TV
[7] <= 330: VB connected with DVI combo connector
>= 661: VB connected to YPbPr
*/
/* CR35 (300 series only) */
#define TVOverScan 0x10
#define TVOverScanShift 4
/* CR35 (661 series only)
[0] 1 = PAL, 0 = NTSC
[1] 1 = NTSC-J (if D0 = 0)
[2] 1 = PALM (if D0 = 1)
[3] 1 = PALN (if D0 = 1)
[4] 1 = Overscan (Chrontel only)
[7:5] (only if D2 in CR38 is set)
000 525i
001 525p
010 750p
011 1080i (or HiVision on 301, 301B)
These bits are being translated to TVMode flag.
*/
/*
CR37
[0] Set 24/18 bit (0/1) RGB to LVDS/TMDS transmitter (set by BIOS)
[3:1] External chip
300 series:
001 SiS301 (never seen)
010 LVDS
011 LVDS + Tumpion Zurac
100 LVDS + Chrontel 7005
110 Chrontel 7005
315/330 series
001 SiS30x (never seen)
010 LVDS
011 LVDS + Chrontel 7019
660 series [2:1] only:
reserved (now in CR38)
All other combinations reserved
[3] 661 only: Pass 1:1 data
[4] LVDS: 0: Panel Link expands / 1: Panel Link does not expand
30x: 0: Bridge scales / 1: Bridge does not scale = Panel scales (if possible)
[5] LCD polarity select
0: VESA DMT Standard
1: EDID 2.x defined
[6] LCD horizontal polarity select
0: High active
1: Low active
[7] LCD vertical polarity select
0: High active
1: Low active
*/
/* CR37: LCDInfo */
#define LCDRGB18Bit 0x0001
#define LCDNonExpanding 0x0010
#define LCDSync 0x0020
#define LCDPass11 0x0100 /* 0: center screen, 1: Pass 1:1 data */
#define LCDDualLink 0x0200
#define DontExpandLCD LCDNonExpanding
#define LCDNonExpandingShift 4
#define DontExpandLCDShift LCDNonExpandingShift
#define LCDSyncBit 0x00e0
#define LCDSyncShift 6
/* CR38 (315 series) */
#define EnableDualEdge 0x01
#define SetToLCDA 0x02 /* LCD channel A (301C/302B/30x(E)LV and 650+LVDS only) */
#define EnableCHScart 0x04 /* Scart on Ch7019 (unofficial definition - TW) */
#define EnableCHYPbPr 0x08 /* YPbPr on Ch7019 (480i HDTV); only on 650/Ch7019 systems */
#define EnableSiSYPbPr 0x08 /* Enable YPbPr mode (30xLV/301C only) */
#define EnableYPbPr525i 0x00 /* Enable 525i YPbPr mode (30xLV/301C only) (mask 0x30) */
#define EnableYPbPr525p 0x10 /* Enable 525p YPbPr mode (30xLV/301C only) (mask 0x30) */
#define EnableYPbPr750p 0x20 /* Enable 750p YPbPr mode (30xLV/301C only) (mask 0x30) */
#define EnableYPbPr1080i 0x30 /* Enable 1080i YPbPr mode (30xLV/301C only) (mask 0x30) */
#define EnablePALM 0x40 /* 1 = Set PALM */
#define EnablePALN 0x80 /* 1 = Set PALN */
#define EnableNTSCJ EnablePALM /* Not BIOS */
/* CR38 (661 and later)
D[7:5] 000 No VB
001 301 series VB
010 LVDS
011 Chrontel 7019
100 Conexant
D2 Enable YPbPr output (see CR35)
D[1:0] LCDA (like before)
*/
#define EnablePALMN 0x40 /* Romflag: 1 = Allow PALM/PALN */
/* CR39 (650 only) */
#define LCDPass1_1 0x01 /* 0: center screen, 1: pass 1:1 data output */
#define Enable302LV_DualLink 0x04 /* 302LV only; enable dual link */
/* CR39 (661 and later)
D[1:0] YPbPr Aspect Ratio
00 4:3 letterbox
01 4:3
10 16:9
11 4:3
*/
/* CR3B (651+301C)
D[1:0] YPbPr Aspect Ratio
?
*/
/* CR79 (315/330 series only; not 661 and later)
[3-0] Notify driver
0001 Mode Switch event (set by BIOS)
0010 Epansion On/Off event
0011 TV UnderScan/OverScan event
0100 Set Brightness event
0101 Set Contrast event
0110 Set Mute event
0111 Set Volume Up/Down event
[4] Enable Backlight Control by BIOS/driver
(set by driver; set means that the BIOS should
not touch the backlight registers because eg.
the driver already switched off the backlight)
[5] PAL/NTSC (set by BIOS)
[6] Expansion On/Off (set by BIOS; copied to CR32[4])
[7] TV UnderScan/OverScan (set by BIOS)
*/
/* LCDResInfo */
#define Panel300_800x600 0x01 /* CR36 */
#define Panel300_1024x768 0x02
#define Panel300_1280x1024 0x03
#define Panel300_1280x960 0x04
#define Panel300_640x480 0x05
#define Panel300_1024x600 0x06
#define Panel300_1152x768 0x07
#define Panel300_1280x768 0x0a
#define Panel300_320x480 0x0e /* fstn - This is fake, can be any */
#define Panel300_Custom 0x0f
#define Panel300_Barco1366 0x10
#define Panel310_800x600 0x01
#define Panel310_1024x768 0x02
#define Panel310_1280x1024 0x03
#define Panel310_640x480 0x04
#define Panel310_1024x600 0x05
#define Panel310_1152x864 0x06
#define Panel310_1280x960 0x07
#define Panel310_1152x768 0x08 /* LVDS only */
#define Panel310_1400x1050 0x09
#define Panel310_1280x768 0x0a
#define Panel310_1600x1200 0x0b
#define Panel310_640x480_2 0x0c
#define Panel310_640x480_3 0x0d
#define Panel310_320x480 0x0e /* fstn - TW: This is fake, can be any */
#define Panel310_Custom 0x0f
#define Panel661_800x600 0x01
#define Panel661_1024x768 0x02
#define Panel661_1280x1024 0x03
#define Panel661_640x480 0x04
#define Panel661_1024x600 0x05
#define Panel661_1152x864 0x06
#define Panel661_1280x960 0x07
#define Panel661_1152x768 0x08
#define Panel661_1400x1050 0x09
#define Panel661_1280x768 0x0a
#define Panel661_1600x1200 0x0b
#define Panel661_1280x800 0x0c
#define Panel661_1680x1050 0x0d
#define Panel661_1280x720 0x0e
#define Panel661_Custom 0x0f
#define Panel_800x600 0x01 /* Unified values */
#define Panel_1024x768 0x02 /* MUST match BIOS values from 0-e */
#define Panel_1280x1024 0x03
#define Panel_640x480 0x04
#define Panel_1024x600 0x05
#define Panel_1152x864 0x06
#define Panel_1280x960 0x07
#define Panel_1152x768 0x08 /* LVDS only */
#define Panel_1400x1050 0x09
#define Panel_1280x768 0x0a /* 30xB/C and LVDS only (BIOS: all) */
#define Panel_1600x1200 0x0b
#define Panel_1280x800 0x0c /* 661etc (TMDS) */
#define Panel_1680x1050 0x0d /* 661etc */
#define Panel_1280x720 0x0e /* 661etc */
#define Panel_Custom 0x0f /* MUST BE 0x0f (for DVI DDC detection) */
#define Panel_320x480 0x10 /* SiS 550 fstn - TW: This is fake, can be any */
#define Panel_Barco1366 0x11
#define Panel_848x480 0x12
#define Panel_640x480_2 0x13 /* SiS 550 */
#define Panel_640x480_3 0x14 /* SiS 550 */
#define Panel_1280x768_2 0x15 /* 30xLV */
#define Panel_1280x768_3 0x16 /* (unused) */
#define Panel_1280x800_2 0x17 /* 30xLV */
/* Index in ModeResInfo table */
#define SIS_RI_320x200 0
#define SIS_RI_320x240 1
#define SIS_RI_320x400 2
#define SIS_RI_400x300 3
#define SIS_RI_512x384 4
#define SIS_RI_640x400 5
#define SIS_RI_640x480 6
#define SIS_RI_800x600 7
#define SIS_RI_1024x768 8
#define SIS_RI_1280x1024 9
#define SIS_RI_1600x1200 10
#define SIS_RI_1920x1440 11
#define SIS_RI_2048x1536 12
#define SIS_RI_720x480 13
#define SIS_RI_720x576 14
#define SIS_RI_1280x960 15
#define SIS_RI_800x480 16
#define SIS_RI_1024x576 17
#define SIS_RI_1280x720 18
#define SIS_RI_856x480 19
#define SIS_RI_1280x768 20
#define SIS_RI_1400x1050 21
#define SIS_RI_1152x864 22 /* Up to here SiS conforming */
#define SIS_RI_848x480 23
#define SIS_RI_1360x768 24
#define SIS_RI_1024x600 25
#define SIS_RI_1152x768 26
#define SIS_RI_768x576 27
#define SIS_RI_1360x1024 28
#define SIS_RI_1680x1050 29
#define SIS_RI_1280x800 30
#define SIS_RI_1920x1080 31
#define SIS_RI_960x540 32
#define SIS_RI_960x600 33
/* CR5F */
#define IsM650 0x80
/* Timing data */
#define NTSCHT 1716
#define NTSC2HT 1920
#define NTSCVT 525
#define PALHT 1728
#define PALVT 625
#define StHiTVHT 892
#define StHiTVVT 1126
#define StHiTextTVHT 1000
#define StHiTextTVVT 1126
#define ExtHiTVHT 2100
#define ExtHiTVVT 1125
/* Indices in (VB)VCLKData tables */
#define VCLK28 0x00 /* Index in VCLKData table (300 and 315) */
#define VCLK40 0x04 /* Index in VCLKData table (300 and 315) */
#define VCLK65_300 0x09 /* Index in VCLKData table (300) */
#define VCLK108_2_300 0x14 /* Index in VCLKData table (300) */
#define VCLK81_300 0x3f /* Index in VCLKData table (300) */
#define VCLK108_3_300 0x42 /* Index in VCLKData table (300) */
#define VCLK100_300 0x43 /* Index in VCLKData table (300) */
#define VCLK34_300 0x3d /* Index in VCLKData table (300) */
#define VCLK_CUSTOM_300 0x47
#define VCLK65_315 0x0b /* Index in (VB)VCLKData table (315) */
#define VCLK108_2_315 0x19 /* Index in (VB)VCLKData table (315) */
#define VCLK81_315 0x5b /* Index in (VB)VCLKData table (315) */
#define VCLK162_315 0x5e /* Index in (VB)VCLKData table (315) */
#define VCLK108_3_315 0x45 /* Index in VBVCLKData table (315) */
#define VCLK100_315 0x46 /* Index in VBVCLKData table (315) */
#define VCLK34_315 0x55
#define VCLK68_315 0x0d
#define VCLK_1280x800_315_2 0x5c /* Index in VBVCLKData table (315) */
#define VCLK121_315 0x5d /* Index in VBVCLKData table (315) */
#define VCLK_1280x720 0x5f
#define VCLK_1280x768_2 0x60
#define VCLK_1280x768_3 0x61 /* (unused?) */
#define VCLK_CUSTOM_315 0x62
#define VCLK_1280x720_2 0x63
#define VCLK_720x480 0x67
#define VCLK_720x576 0x68
#define VCLK_768x576 0x68
#define VCLK_848x480 0x65
#define VCLK_856x480 0x66
#define VCLK_800x480 0x65
#define VCLK_1024x576 0x51
#define VCLK_1152x864 0x64
#define VCLK_1360x768 0x58
#define VCLK_1280x800_315 0x6c
#define TVCLKBASE_300 0x21 /* Indices on TV clocks in VCLKData table (300) */
#define TVCLKBASE_315 0x3a /* Indices on TV clocks in (VB)VCLKData table (315) */
#define TVVCLKDIV2 0x00 /* Index relative to TVCLKBASE */
#define TVVCLK 0x01 /* Index relative to TVCLKBASE */
#define HiTVVCLKDIV2 0x02 /* Index relative to TVCLKBASE */
#define HiTVVCLK 0x03 /* Index relative to TVCLKBASE */
#define HiTVSimuVCLK 0x04 /* Index relative to TVCLKBASE */
#define HiTVTextVCLK 0x05 /* Index relative to TVCLKBASE */
#define YPbPr750pVCLK 0x25 /* Index relative to TVCLKBASE; was 0x0f NOT relative */
/* ------------------------------ */
#define SetSCARTOutput 0x01
#define HotPlugFunction 0x08
#define StStructSize 0x06
#define SIS_VIDEO_CAPTURE 0x00 - 0x30
#define SIS_VIDEO_PLAYBACK 0x02 - 0x30
#define SIS_CRT2_PORT_04 0x04 - 0x30
#define SIS_CRT2_PORT_10 0x10 - 0x30
#define SIS_CRT2_PORT_12 0x12 - 0x30
#define SIS_CRT2_PORT_14 0x14 - 0x30
#define ADR_CRT2PtrData 0x20E
#define offset_Zurac 0x210 /* TW: Trumpion Zurac data pointer */
#define ADR_LVDSDesPtrData 0x212
#define ADR_LVDSCRT1DataPtr 0x214
#define ADR_CHTVVCLKPtr 0x216
#define ADR_CHTVRegDataPtr 0x218
#define LCDDataLen 8
#define HiTVDataLen 12
#define TVDataLen 16
#define LVDSDataLen 6
#define LVDSDesDataLen 3
#define ActiveNonExpanding 0x40
#define ActiveNonExpandingShift 6
#define ActivePAL 0x20
#define ActivePALShift 5
#define ModeSwitchStatus 0x0F
#define SoftTVType 0x40
#define SoftSettingAddr 0x52
#define ModeSettingAddr 0x53
#define _PanelType00 0x00
#define _PanelType01 0x08
#define _PanelType02 0x10
#define _PanelType03 0x18
#define _PanelType04 0x20
#define _PanelType05 0x28
#define _PanelType06 0x30
#define _PanelType07 0x38
#define _PanelType08 0x40
#define _PanelType09 0x48
#define _PanelType0A 0x50
#define _PanelType0B 0x58
#define _PanelType0C 0x60
#define _PanelType0D 0x68
#define _PanelType0E 0x70
#define _PanelType0F 0x78
#define PRIMARY_VGA 0 /* 1: SiS is primary vga 0:SiS is secondary vga */
#define BIOSIDCodeAddr 0x235 /* Offsets to ptrs in BIOS image */
#define OEMUtilIDCodeAddr 0x237
#define VBModeIDTableAddr 0x239
#define OEMTVPtrAddr 0x241
#define PhaseTableAddr 0x243
#define NTSCFilterTableAddr 0x245
#define PALFilterTableAddr 0x247
#define OEMLCDPtr_1Addr 0x249
#define OEMLCDPtr_2Addr 0x24B
#define LCDHPosTable_1Addr 0x24D
#define LCDHPosTable_2Addr 0x24F
#define LCDVPosTable_1Addr 0x251
#define LCDVPosTable_2Addr 0x253
#define OEMLCDPIDTableAddr 0x255
#define VBModeStructSize 5
#define PhaseTableSize 4
#define FilterTableSize 4
#define LCDHPosTableSize 7
#define LCDVPosTableSize 5
#define OEMLVDSPIDTableSize 4
#define LVDSHPosTableSize 4
#define LVDSVPosTableSize 6
#define VB_ModeID 0
#define VB_TVTableIndex 1
#define VB_LCDTableIndex 2
#define VB_LCDHIndex 3
#define VB_LCDVIndex 4
#define OEMLCDEnable 0x0001
#define OEMLCDDelayEnable 0x0002
#define OEMLCDPOSEnable 0x0004
#define OEMTVEnable 0x0100
#define OEMTVDelayEnable 0x0200
#define OEMTVFlickerEnable 0x0400
#define OEMTVPhaseEnable 0x0800
#define OEMTVFilterEnable 0x1000
#define OEMLCDPanelIDSupport 0x0080
/*
=============================================================
for 315 series (old data layout)
=============================================================
*/
#define SoftDRAMType 0x80
#define SoftSetting_OFFSET 0x52
#define SR07_OFFSET 0x7C
#define SR15_OFFSET 0x7D
#define SR16_OFFSET 0x81
#define SR17_OFFSET 0x85
#define SR19_OFFSET 0x8D
#define SR1F_OFFSET 0x99
#define SR21_OFFSET 0x9A
#define SR22_OFFSET 0x9B
#define SR23_OFFSET 0x9C
#define SR24_OFFSET 0x9D
#define SR25_OFFSET 0x9E
#define SR31_OFFSET 0x9F
#define SR32_OFFSET 0xA0
#define SR33_OFFSET 0xA1
#define CR40_OFFSET 0xA2
#define SR25_1_OFFSET 0xF6
#define CR49_OFFSET 0xF7
#define VB310Data_1_2_Offset 0xB6
#define VB310Data_4_D_Offset 0xB7
#define VB310Data_4_E_Offset 0xB8
#define VB310Data_4_10_Offset 0xBB
#define RGBSenseDataOffset 0xBD
#define YCSenseDataOffset 0xBF
#define VideoSenseDataOffset 0xC1
#define OutputSelectOffset 0xF3
#define ECLK_MCLK_DISTANCE 0x14
#define VBIOSTablePointerStart 0x100
#define StandTablePtrOffset VBIOSTablePointerStart+0x02
#define EModeIDTablePtrOffset VBIOSTablePointerStart+0x04
#define CRT1TablePtrOffset VBIOSTablePointerStart+0x06
#define ScreenOffsetPtrOffset VBIOSTablePointerStart+0x08
#define VCLKDataPtrOffset VBIOSTablePointerStart+0x0A
#define MCLKDataPtrOffset VBIOSTablePointerStart+0x0E
#define CRT2PtrDataPtrOffset VBIOSTablePointerStart+0x10
#define TVAntiFlickPtrOffset VBIOSTablePointerStart+0x12
#define TVDelayPtr1Offset VBIOSTablePointerStart+0x14
#define TVPhaseIncrPtr1Offset VBIOSTablePointerStart+0x16
#define TVYFilterPtr1Offset VBIOSTablePointerStart+0x18
#define LCDDelayPtr1Offset VBIOSTablePointerStart+0x20
#define TVEdgePtr1Offset VBIOSTablePointerStart+0x24
#define CRT2Delay1Offset VBIOSTablePointerStart+0x28
#endif