kernel-ark/include/asm-sh/uaccess.h
Yoshinori Sato a2d1a5fae6 sh: __addr_ok() and other misc nommu fixups.
A few more outstanding nommu fixups..

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:25:07 +09:00

572 lines
14 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
*
* User space memory access functions
*
* Copyright (C) 1999, 2002 Niibe Yutaka
* Copyright (C) 2003 Paul Mundt
*
* Based on:
* MIPS implementation version 1.15 by
* Copyright (C) 1996, 1997, 1998 by Ralf Baechle
* and i386 version.
*/
#ifndef __ASM_SH_UACCESS_H
#define __ASM_SH_UACCESS_H
#include <linux/errno.h>
#include <linux/sched.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The fs value determines whether argument validity checking should be
* performed or not. If get_fs() == USER_DS, checking is performed, with
* get_fs() == KERNEL_DS, checking is bypassed.
*
* For historical reasons (Data Segment Register?), these macros are misnamed.
*/
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
#define segment_eq(a,b) ((a).seg == (b).seg)
#define get_ds() (KERNEL_DS)
#if !defined(CONFIG_MMU)
/* NOMMU is always true */
#define __addr_ok(addr) (1)
static inline mm_segment_t get_fs(void)
{
return USER_DS;
}
static inline void set_fs(mm_segment_t s)
{
}
/*
* __access_ok: Check if address with size is OK or not.
*
* If we don't have an MMU (or if its disabled) the only thing we really have
* to look out for is if the address resides somewhere outside of what
* available RAM we have.
*
* TODO: This check could probably also stand to be restricted somewhat more..
* though it still does the Right Thing(tm) for the time being.
*/
static inline int __access_ok(unsigned long addr, unsigned long size)
{
extern unsigned long memory_start, memory_end;
return ((addr >= memory_start) && ((addr + size) < memory_end));
}
#else /* CONFIG_MMU */
#define __addr_ok(addr) \
((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
/*
* __access_ok: Check if address with size is OK or not.
*
* We do three checks:
* (1) is it user space?
* (2) addr + size --> carry?
* (3) addr + size >= 0x80000000 (PAGE_OFFSET)
*
* (1) (2) (3) | RESULT
* 0 0 0 | ok
* 0 0 1 | ok
* 0 1 0 | bad
* 0 1 1 | bad
* 1 0 0 | ok
* 1 0 1 | bad
* 1 1 0 | bad
* 1 1 1 | bad
*/
static inline int __access_ok(unsigned long addr, unsigned long size)
{
unsigned long flag, tmp;
__asm__("stc r7_bank, %0\n\t"
"mov.l @(8,%0), %0\n\t"
"clrt\n\t"
"addc %2, %1\n\t"
"and %1, %0\n\t"
"rotcl %0\n\t"
"rotcl %0\n\t"
"and #3, %0"
: "=&z" (flag), "=r" (tmp)
: "r" (addr), "1" (size)
: "t");
return flag == 0;
}
#endif /* CONFIG_MMU */
static inline int access_ok(int type, const void __user *p, unsigned long size)
{
unsigned long addr = (unsigned long)p;
return __access_ok(addr, size);
}
/*
* Uh, these should become the main single-value transfer routines ...
* They automatically use the right size if we just have the right
* pointer type ...
*
* As SuperH uses the same address space for kernel and user data, we
* can just do these as direct assignments.
*
* Careful to not
* (a) re-use the arguments for side effects (sizeof is ok)
* (b) require any knowledge of processes at this stage
*/
#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
/*
* The "__xxx" versions do not do address space checking, useful when
* doing multiple accesses to the same area (the user has to do the
* checks by hand with "access_ok()")
*/
#define __put_user(x,ptr) \
__put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
#define __get_user(x,ptr) \
__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct *)(x))
#define __get_user_size(x,ptr,size,retval) \
do { \
retval = 0; \
switch (size) { \
case 1: \
__get_user_asm(x, ptr, retval, "b"); \
break; \
case 2: \
__get_user_asm(x, ptr, retval, "w"); \
break; \
case 4: \
__get_user_asm(x, ptr, retval, "l"); \
break; \
default: \
__get_user_unknown(); \
break; \
} \
} while (0)
#define __get_user_nocheck(x,ptr,size) \
({ \
long __gu_err, __gu_val; \
__get_user_size(__gu_val, (ptr), (size), __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
})
#ifdef CONFIG_MMU
#define __get_user_check(x,ptr,size) \
({ \
long __gu_err, __gu_val; \
switch (size) { \
case 1: \
__get_user_1(__gu_val, (ptr), __gu_err); \
break; \
case 2: \
__get_user_2(__gu_val, (ptr), __gu_err); \
break; \
case 4: \
__get_user_4(__gu_val, (ptr), __gu_err); \
break; \
default: \
__get_user_unknown(); \
break; \
} \
\
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
})
#define __get_user_1(x,addr,err) ({ \
__asm__("stc r7_bank, %1\n\t" \
"mov.l @(8,%1), %1\n\t" \
"and %2, %1\n\t" \
"cmp/pz %1\n\t" \
"bt/s 1f\n\t" \
" mov #0, %0\n\t" \
"0:\n" \
"mov #-14, %0\n\t" \
"bra 2f\n\t" \
" mov #0, %1\n" \
"1:\n\t" \
"mov.b @%2, %1\n\t" \
"extu.b %1, %1\n" \
"2:\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 0b\n\t" \
".previous" \
: "=&r" (err), "=&r" (x) \
: "r" (addr) \
: "t"); \
})
#define __get_user_2(x,addr,err) ({ \
__asm__("stc r7_bank, %1\n\t" \
"mov.l @(8,%1), %1\n\t" \
"and %2, %1\n\t" \
"cmp/pz %1\n\t" \
"bt/s 1f\n\t" \
" mov #0, %0\n\t" \
"0:\n" \
"mov #-14, %0\n\t" \
"bra 2f\n\t" \
" mov #0, %1\n" \
"1:\n\t" \
"mov.w @%2, %1\n\t" \
"extu.w %1, %1\n" \
"2:\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 0b\n\t" \
".previous" \
: "=&r" (err), "=&r" (x) \
: "r" (addr) \
: "t"); \
})
#define __get_user_4(x,addr,err) ({ \
__asm__("stc r7_bank, %1\n\t" \
"mov.l @(8,%1), %1\n\t" \
"and %2, %1\n\t" \
"cmp/pz %1\n\t" \
"bt/s 1f\n\t" \
" mov #0, %0\n\t" \
"0:\n" \
"mov #-14, %0\n\t" \
"bra 2f\n\t" \
" mov #0, %1\n" \
"1:\n\t" \
"mov.l @%2, %1\n\t" \
"2:\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 0b\n\t" \
".previous" \
: "=&r" (err), "=&r" (x) \
: "r" (addr) \
: "t"); \
})
#else /* CONFIG_MMU */
#define __get_user_check(x,ptr,size) \
({ \
long __gu_err, __gu_val; \
if (__access_ok((unsigned long)(ptr), (size))) { \
__get_user_size(__gu_val, (ptr), (size), __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
} else \
__gu_err = -EFAULT; \
__gu_err; \
})
#endif
#define __get_user_asm(x, addr, err, insn) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov." insn " %2, %1\n\t" \
"mov #0, %0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"mov #0, %1\n\t" \
"mov.l 4f, %0\n\t" \
"jmp @%0\n\t" \
" mov %3, %0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
:"=&r" (err), "=&r" (x) \
:"m" (__m(addr)), "i" (-EFAULT)); })
extern void __get_user_unknown(void);
#define __put_user_size(x,ptr,size,retval) \
do { \
retval = 0; \
switch (size) { \
case 1: \
__put_user_asm(x, ptr, retval, "b"); \
break; \
case 2: \
__put_user_asm(x, ptr, retval, "w"); \
break; \
case 4: \
__put_user_asm(x, ptr, retval, "l"); \
break; \
case 8: \
__put_user_u64(x, ptr, retval); \
break; \
default: \
__put_user_unknown(); \
} \
} while (0)
#define __put_user_nocheck(x,ptr,size) \
({ \
long __pu_err; \
__put_user_size((x),(ptr),(size),__pu_err); \
__pu_err; \
})
#define __put_user_check(x,ptr,size) \
({ \
long __pu_err = -EFAULT; \
__typeof__(*(ptr)) *__pu_addr = (ptr); \
\
if (__access_ok((unsigned long)__pu_addr,size)) \
__put_user_size((x),__pu_addr,(size),__pu_err); \
__pu_err; \
})
#define __put_user_asm(x, addr, err, insn) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov." insn " %1, %2\n\t" \
"mov #0, %0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f, %0\n\t" \
"jmp @%0\n\t" \
"mov %3, %0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
:"=&r" (err) \
:"r" (x), "m" (__m(addr)), "i" (-EFAULT) \
:"memory"); })
#if defined(__LITTLE_ENDIAN__)
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov.l %R1,%2\n\t" \
"mov.l %S1,%T2\n\t" \
"mov #0,%0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f,%0\n\t" \
"jmp @%0\n\t" \
" mov %3,%0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
: "=r" (retval) \
: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
: "memory"); })
#else
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov.l %S1,%2\n\t" \
"mov.l %R1,%T2\n\t" \
"mov #0,%0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f,%0\n\t" \
"jmp @%0\n\t" \
" mov %3,%0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
: "=r" (retval) \
: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
: "memory"); })
#endif
extern void __put_user_unknown(void);
/* Generic arbitrary sized copy. */
/* Return the number of bytes NOT copied */
extern __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
#define copy_to_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })
#define __copy_to_user(to,from,n) \
__copy_user((void *)(to), \
(void *)(from), n)
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define copy_from_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
void *__copy_from = (void *) (from); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })
#define __copy_from_user(to,from,n) \
__copy_user((void *)(to), \
(void *)(from), n)
/*
* Clear the area and return remaining number of bytes
* (on failure. Usually it's 0.)
*/
extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
#define clear_user(addr,n) ({ \
void * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
__cl_size = __clear_user(__cl_addr, __cl_size); \
__cl_size; })
static __inline__ int
__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
{
__kernel_size_t res;
unsigned long __dummy, _d, _s;
__asm__ __volatile__(
"9:\n"
"mov.b @%2+, %1\n\t"
"cmp/eq #0, %1\n\t"
"bt/s 2f\n"
"1:\n"
"mov.b %1, @%3\n\t"
"dt %7\n\t"
"bf/s 9b\n\t"
" add #1, %3\n\t"
"2:\n\t"
"sub %7, %0\n"
"3:\n"
".section .fixup,\"ax\"\n"
"4:\n\t"
"mov.l 5f, %1\n\t"
"jmp @%1\n\t"
" mov %8, %0\n\t"
".balign 4\n"
"5: .long 3b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 9b,4b\n"
".previous"
: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
: "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
"i" (-EFAULT)
: "memory", "t");
return res;
}
#define strncpy_from_user(dest,src,count) ({ \
unsigned long __sfu_src = (unsigned long) (src); \
int __sfu_count = (int) (count); \
long __sfu_res = -EFAULT; \
if(__access_ok(__sfu_src, __sfu_count)) { \
__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
} __sfu_res; })
/*
* Return the size of a string (including the ending 0!)
*/
static __inline__ long __strnlen_user(const char __user *__s, long __n)
{
unsigned long res;
unsigned long __dummy;
__asm__ __volatile__(
"9:\n"
"cmp/eq %4, %0\n\t"
"bt 2f\n"
"1:\t"
"mov.b @(%0,%3), %1\n\t"
"tst %1, %1\n\t"
"bf/s 9b\n\t"
" add #1, %0\n"
"2:\n"
".section .fixup,\"ax\"\n"
"3:\n\t"
"mov.l 4f, %1\n\t"
"jmp @%1\n\t"
" mov #0, %0\n"
".balign 4\n"
"4: .long 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 1b,3b\n"
".previous"
: "=z" (res), "=&r" (__dummy)
: "0" (0), "r" (__s), "r" (__n)
: "t");
return res;
}
static __inline__ long strnlen_user(const char __user *s, long n)
{
if (!__addr_ok(s))
return 0;
else
return __strnlen_user(s, n);
}
#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
extern int fixup_exception(struct pt_regs *regs);
#endif /* __ASM_SH_UACCESS_H */