davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
63e6552f7c
kernel-ark/arch/arm/mach-pxa
History
Eric Miao 63e6552f7c [ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.h 
pxa_gpio_{get,set}_value() are not used anymore, remove them from hardware.h.
Declaration of pxa_gpio_mode() is still being referenced and thus moved into
pxa2xx-gpio.h

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:42:37 +08:00
..
include/mach [ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.h 2008-12-02 14:42:37 +08:00
am200epd.c
clock.c
clock.h
cm-x2xx-pci.c [ARM] 5282/1: pxa: add CM-X255 support 2008-10-07 12:05:07 +01:00
cm-x2xx-pci.h [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255 2008-10-07 12:05:05 +01:00
cm-x2xx.c [ARM] 5282/1: pxa: add CM-X255 support 2008-10-07 12:05:07 +01:00
cm-x255.c [ARM] 5284/1: pxa: cm-x255: add NOR and NAND flash support 2008-10-07 12:08:14 +01:00
cm-x270.c [ARM] 5306/1: pxa: fix build error on CM-X270 2008-10-15 12:34:48 +01:00
cm-x300.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
colibri.c [ARM] pxa/colibri: convert to use new MFP API 2008-09-26 23:43:21 +01:00
corgi_lcd.c [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig 2008-10-21 11:36:19 +08:00
corgi_pm.c [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl 2008-10-29 11:45:37 +08:00
corgi_ssp.c Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c" 2008-10-21 09:42:29 +08:00
corgi.c Merge branch 'pxa-all' into devel 2008-10-09 21:33:02 +01:00
cpufreq-pxa2xx.c cpufreq: remove policy->governor setting in drivers initialization 2008-10-15 16:42:47 -07:00
cpufreq-pxa3xx.c cpufreq: remove policy->governor setting in drivers initialization 2008-10-15 16:42:47 -07:00
devices.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
devices.h
dma.c
e330.c
e350.c
e400.c
e740.c
e750.c
e800.c
em-x270.c [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers 2008-10-07 19:12:57 +01:00
eseries.c
eseries.h
ezx.c
generic.c [ARM] ohci-pxa27x: use ioremap() and offset for register access 2008-10-07 19:12:58 +01:00
generic.h [ARM] pxa: better MFP low power state support for pxa25x/pxa27x 2008-09-26 23:43:20 +01:00
gpio.c [ARM] pxa: add support for additional GPIOs on PXA26x 2008-12-02 14:42:37 +08:00
gumstix.c
idp.c [ARM] pxa/idp: remove the unnecessary idp_init_irq() 2008-09-26 23:43:21 +01:00
irq.c
Kconfig [ARM] pxa: add support for additional GPIOs on PXA26x 2008-12-02 14:42:37 +08:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds.c [ARM] 5251/1: remove old LED support for Trizeps4 SOM 2008-10-01 22:34:34 +01:00
leds.h
littleton.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
lpd270.c [ARM] 5298/1: Drop desc_handle_irq() 2008-10-09 15:00:36 +01:00
lubbock.c [ARM] 5298/1: Drop desc_handle_irq() 2008-10-09 15:00:36 +01:00
magician.c [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers 2008-10-07 19:12:57 +01:00
mainstone.c [ARM] 5298/1: Drop desc_handle_irq() 2008-10-09 15:00:36 +01:00
Makefile [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig 2008-10-21 11:36:19 +08:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: add support for additional GPIOs on PXA26x 2008-12-02 14:42:37 +08:00
mfp-pxa3xx.c
mioa701_bootresume.S
mioa701.c
mp900.c [ARM] 5277/1: Add basic support for MobilePro 900/c 2008-10-02 22:56:05 +01:00
palmtx.c [ARM] 5248/1: wm97xx generic battery driver 2008-10-02 22:48:34 +01:00
palmz72.c [ARM] 5239/1: Palm Zire 72 power management support 2008-10-09 15:12:07 +01:00
pcm027.c [ARM] pxa/pcm027: convert to use new MFP API 2008-09-26 23:43:22 +01:00
pcm990-baseboard.c [ARM] 5298/1: Drop desc_handle_irq() 2008-10-09 15:00:36 +01:00
pm.c
poodle.c [ARM] pxa: fix typo in pxa25x MFP definitions 2008-09-26 23:43:20 +01:00
pwm.c [ARM] 5303/1: period_cycles should be greater than 1 2008-10-17 13:44:47 +01:00
pxa2xx.c
pxa3xx.c
pxa25x.c [ARM] pxa: add support for additional GPIOs on PXA26x 2008-12-02 14:42:37 +08:00
pxa27x.c [ARM] pxa: use 'pxa_last_gpio' instead of 'gpio_nr' in mfp-pxa2xx.c 2008-12-02 14:42:36 +08:00
pxa300.c
pxa320.c
pxa930.c
reset.c [ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings 2008-11-17 14:05:41 +00:00
saar.c
sharpsl_pm.c [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig 2008-10-21 11:36:19 +08:00
sharpsl.h
sleep.S
smemc.c
spitz_pm.c [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl 2008-10-29 11:45:37 +08:00
spitz.c [ARM] pxa: fix incorrect PCMCIA PSKTSEL pin configuration for spitz 2008-11-16 16:03:13 +08:00
ssp.c
standby.S
tavorevb.c
time.c Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2008-10-11 10:09:45 -07:00
tosa-bt.c
tosa.c tosa: add support for bl/lcd driver 2008-10-21 00:19:49 +01:00
trizeps4.c [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c 2008-10-18 14:24:08 +01:00
viper.c [ARM] 5308/1: Fix Viper ISA IRQ handling 2008-10-15 13:01:36 +01:00
zylonite_pxa300.c [ARM] pxa/zylonite: add support for USB OHCI 2008-10-07 19:12:59 +01:00
zylonite_pxa320.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
zylonite.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00