6394678e6e
For realistic systems the power management is controlled entirely via runtime PM - if the device is not runtime suspended then the suspend will abort without doing anything as functionality such as accessory detection or audio bypass will require the device to be enabled while if the device is runtime suspended it is already in the lowest power state. This means that system suspend is redundant and can be removed which avoids issues with attempting to double disable the regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
748 lines
17 KiB
C
748 lines
17 KiB
C
/*
|
|
* wm8994-core.c -- Device access for Wolfson WM8994
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/mfd/wm8994/core.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
#include <linux/mfd/wm8994/registers.h>
|
|
|
|
#include "wm8994.h"
|
|
|
|
/**
|
|
* wm8994_reg_read: Read a single WM8994 register.
|
|
*
|
|
* @wm8994: Device to read from.
|
|
* @reg: Register to read.
|
|
*/
|
|
int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(wm8994->regmap, reg, &val);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_reg_read);
|
|
|
|
/**
|
|
* wm8994_bulk_read: Read multiple WM8994 registers
|
|
*
|
|
* @wm8994: Device to read from
|
|
* @reg: First register
|
|
* @count: Number of registers
|
|
* @buf: Buffer to fill. The data will be returned big endian.
|
|
*/
|
|
int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
|
|
int count, u16 *buf)
|
|
{
|
|
return regmap_bulk_read(wm8994->regmap, reg, buf, count);
|
|
}
|
|
|
|
/**
|
|
* wm8994_reg_write: Write a single WM8994 register.
|
|
*
|
|
* @wm8994: Device to write to.
|
|
* @reg: Register to write to.
|
|
* @val: Value to write.
|
|
*/
|
|
int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
return regmap_write(wm8994->regmap, reg, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_reg_write);
|
|
|
|
/**
|
|
* wm8994_bulk_write: Write multiple WM8994 registers
|
|
*
|
|
* @wm8994: Device to write to
|
|
* @reg: First register
|
|
* @count: Number of registers
|
|
* @buf: Buffer to write from. Data must be big-endian formatted.
|
|
*/
|
|
int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
|
|
int count, const u16 *buf)
|
|
{
|
|
return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_bulk_write);
|
|
|
|
/**
|
|
* wm8994_set_bits: Set the value of a bitfield in a WM8994 register
|
|
*
|
|
* @wm8994: Device to write to.
|
|
* @reg: Register to write to.
|
|
* @mask: Mask of bits to set.
|
|
* @val: Value to set (unshifted)
|
|
*/
|
|
int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
|
|
unsigned short mask, unsigned short val)
|
|
{
|
|
return regmap_update_bits(wm8994->regmap, reg, mask, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_set_bits);
|
|
|
|
static struct mfd_cell wm8994_regulator_devs[] = {
|
|
{
|
|
.name = "wm8994-ldo",
|
|
.id = 1,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
{
|
|
.name = "wm8994-ldo",
|
|
.id = 2,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
};
|
|
|
|
static struct resource wm8994_codec_resources[] = {
|
|
{
|
|
.start = WM8994_IRQ_TEMP_SHUT,
|
|
.end = WM8994_IRQ_TEMP_WARN,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource wm8994_gpio_resources[] = {
|
|
{
|
|
.start = WM8994_IRQ_GPIO(1),
|
|
.end = WM8994_IRQ_GPIO(11),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct mfd_cell wm8994_devs[] = {
|
|
{
|
|
.name = "wm8994-codec",
|
|
.num_resources = ARRAY_SIZE(wm8994_codec_resources),
|
|
.resources = wm8994_codec_resources,
|
|
},
|
|
|
|
{
|
|
.name = "wm8994-gpio",
|
|
.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
|
|
.resources = wm8994_gpio_resources,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Supplies for the main bulk of CODEC; the LDO supplies are ignored
|
|
* and should be handled via the standard regulator API supply
|
|
* management.
|
|
*/
|
|
static const char *wm1811_main_supplies[] = {
|
|
"DBVDD1",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
static const char *wm8994_main_supplies[] = {
|
|
"DBVDD",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
static const char *wm8958_main_supplies[] = {
|
|
"DBVDD1",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
static int wm8994_suspend(struct device *dev)
|
|
{
|
|
struct wm8994 *wm8994 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* Don't actually go through with the suspend if the CODEC is
|
|
* still active (eg, for audio passthrough from CP. */
|
|
ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read power status: %d\n", ret);
|
|
} else if (ret & WM8994_VMID_SEL_MASK) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read power status: %d\n", ret);
|
|
} else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
|
|
WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
|
|
WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read power status: %d\n", ret);
|
|
} else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
|
|
WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
|
|
WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM8958:
|
|
case WM1811:
|
|
ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read power status: %d\n", ret);
|
|
} else if (ret & WM8958_MICD_ENA) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read jackdet: %d\n", ret);
|
|
} else if (ret & WM1811_JACKDET_MODE_MASK) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read jackdet: %d\n", ret);
|
|
} else if (ret & WM1811_JACKDET_MODE_MASK) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Disable LDO pulldowns while the device is suspended if we
|
|
* don't know that something will be driving them. */
|
|
if (!wm8994->ldo_ena_always_driven)
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
|
|
|
|
/* Explicitly put the device into reset in case regulators
|
|
* don't get disabled in order to ensure consistent restart.
|
|
*/
|
|
wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
|
|
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
|
|
|
|
regcache_mark_dirty(wm8994->regmap);
|
|
|
|
/* Restore GPIO registers to prevent problems with mismatched
|
|
* pin configurations.
|
|
*/
|
|
ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1,
|
|
WM8994_GPIO_11);
|
|
if (ret != 0)
|
|
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
|
|
|
|
/* In case one of the GPIOs is used as a wake input. */
|
|
ret = regcache_sync_region(wm8994->regmap,
|
|
WM8994_INTERRUPT_STATUS_1_MASK,
|
|
WM8994_INTERRUPT_STATUS_1_MASK);
|
|
if (ret != 0)
|
|
dev_err(dev, "Failed to restore interrupt mask: %d\n", ret);
|
|
|
|
regcache_cache_only(wm8994->regmap, true);
|
|
wm8994->suspended = true;
|
|
|
|
ret = regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to disable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_resume(struct device *dev)
|
|
{
|
|
struct wm8994 *wm8994 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* We may have lied to the PM core about suspending */
|
|
if (!wm8994->suspended)
|
|
return 0;
|
|
|
|
ret = regulator_bulk_enable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
regcache_cache_only(wm8994->regmap, false);
|
|
ret = regcache_sync(wm8994->regmap);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to restore register map: %d\n", ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
/* Disable LDO pulldowns while the device is active */
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
|
|
0);
|
|
|
|
wm8994->suspended = false;
|
|
|
|
return 0;
|
|
|
|
err_enable:
|
|
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_REGULATOR
|
|
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
|
|
{
|
|
struct wm8994_ldo_pdata *ldo_pdata;
|
|
|
|
if (!pdata)
|
|
return 0;
|
|
|
|
ldo_pdata = &pdata->ldo[ldo];
|
|
|
|
if (!ldo_pdata->init_data)
|
|
return 0;
|
|
|
|
return ldo_pdata->init_data->num_consumer_supplies != 0;
|
|
}
|
|
#else
|
|
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct reg_default wm8994_revc_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0x56, 0x3 },
|
|
{ 0x817, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
static const struct reg_default wm8958_reva_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0xcb, 0x81 },
|
|
{ 0x817, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
static const struct reg_default wm1811_reva_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0x56, 0xc07 },
|
|
{ 0x5d, 0x7e },
|
|
{ 0x5e, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
/*
|
|
* Instantiate the generic non-control parts of the device.
|
|
*/
|
|
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
|
|
{
|
|
struct wm8994_pdata *pdata;
|
|
struct regmap_config *regmap_config;
|
|
const struct reg_default *regmap_patch = NULL;
|
|
const char *devname;
|
|
int ret, i, patch_regs = 0;
|
|
int pulls = 0;
|
|
|
|
if (dev_get_platdata(wm8994->dev)) {
|
|
pdata = dev_get_platdata(wm8994->dev);
|
|
wm8994->pdata = *pdata;
|
|
}
|
|
pdata = &wm8994->pdata;
|
|
|
|
dev_set_drvdata(wm8994->dev, wm8994);
|
|
|
|
/* Add the on-chip regulators first for bootstrapping */
|
|
ret = mfd_add_devices(wm8994->dev, -1,
|
|
wm8994_regulator_devs,
|
|
ARRAY_SIZE(wm8994_regulator_devs),
|
|
NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
|
|
break;
|
|
case WM8994:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
|
|
break;
|
|
case WM8958:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies);
|
|
break;
|
|
default:
|
|
BUG();
|
|
goto err;
|
|
}
|
|
|
|
wm8994->supplies = devm_kzalloc(wm8994->dev,
|
|
sizeof(struct regulator_bulk_data) *
|
|
wm8994->num_supplies, GFP_KERNEL);
|
|
if (!wm8994->supplies) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm1811_main_supplies[i];
|
|
break;
|
|
case WM8994:
|
|
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm8994_main_supplies[i];
|
|
break;
|
|
case WM8958:
|
|
for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm8958_main_supplies[i];
|
|
break;
|
|
default:
|
|
BUG();
|
|
goto err;
|
|
}
|
|
|
|
ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
|
|
if (ret < 0) {
|
|
dev_err(wm8994->dev, "Failed to read ID register\n");
|
|
goto err_enable;
|
|
}
|
|
switch (ret) {
|
|
case 0x1811:
|
|
devname = "WM1811";
|
|
if (wm8994->type != WM1811)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM1811;
|
|
break;
|
|
case 0x8994:
|
|
devname = "WM8994";
|
|
if (wm8994->type != WM8994)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM8994;
|
|
break;
|
|
case 0x8958:
|
|
devname = "WM8958";
|
|
if (wm8994->type != WM8958)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM8958;
|
|
break;
|
|
default:
|
|
dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
|
|
ret);
|
|
ret = -EINVAL;
|
|
goto err_enable;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
|
|
if (ret < 0) {
|
|
dev_err(wm8994->dev, "Failed to read revision register: %d\n",
|
|
ret);
|
|
goto err_enable;
|
|
}
|
|
wm8994->revision = ret & WM8994_CHIP_REV_MASK;
|
|
wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT;
|
|
|
|
switch (wm8994->type) {
|
|
case WM8994:
|
|
switch (wm8994->revision) {
|
|
case 0:
|
|
case 1:
|
|
dev_warn(wm8994->dev,
|
|
"revision %c not fully supported\n",
|
|
'A' + wm8994->revision);
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
default:
|
|
regmap_patch = wm8994_revc_patch;
|
|
patch_regs = ARRAY_SIZE(wm8994_revc_patch);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM8958:
|
|
switch (wm8994->revision) {
|
|
case 0:
|
|
regmap_patch = wm8958_reva_patch;
|
|
patch_regs = ARRAY_SIZE(wm8958_reva_patch);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM1811:
|
|
/* Revision C did not change the relevant layer */
|
|
if (wm8994->revision > 1)
|
|
wm8994->revision++;
|
|
|
|
regmap_patch = wm1811_reva_patch;
|
|
patch_regs = ARRAY_SIZE(wm1811_reva_patch);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname,
|
|
'A' + wm8994->revision, wm8994->cust_id);
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
regmap_config = &wm1811_regmap_config;
|
|
break;
|
|
case WM8994:
|
|
regmap_config = &wm8994_regmap_config;
|
|
break;
|
|
case WM8958:
|
|
regmap_config = &wm8958_regmap_config;
|
|
break;
|
|
default:
|
|
dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
if (regmap_patch) {
|
|
ret = regmap_register_patch(wm8994->regmap, regmap_patch,
|
|
patch_regs);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to register patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
wm8994->irq_base = pdata->irq_base;
|
|
wm8994->gpio_base = pdata->gpio_base;
|
|
|
|
/* GPIO configuration is only applied if it's non-zero */
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
|
|
if (pdata->gpio_defaults[i]) {
|
|
wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
|
|
0xffff, pdata->gpio_defaults[i]);
|
|
}
|
|
}
|
|
|
|
wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
|
|
|
|
if (pdata->spkmode_pu)
|
|
pulls |= WM8994_SPKMODE_PU;
|
|
|
|
/* Disable unneeded pulls */
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
|
|
WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
|
|
pulls);
|
|
|
|
/* In some system designs where the regulators are not in use,
|
|
* we can achieve a small reduction in leakage currents by
|
|
* floating LDO outputs. This bit makes no difference if the
|
|
* LDOs are enabled, it only affects cases where the LDOs were
|
|
* in operation and are then disabled.
|
|
*/
|
|
for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
|
|
if (wm8994_ldo_in_use(pdata, i))
|
|
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
|
|
WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
|
|
else
|
|
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
|
|
WM8994_LDO1_DISCH, 0);
|
|
}
|
|
|
|
wm8994_irq_init(wm8994);
|
|
|
|
ret = mfd_add_devices(wm8994->dev, -1,
|
|
wm8994_devs, ARRAY_SIZE(wm8994_devs),
|
|
NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
pm_runtime_enable(wm8994->dev);
|
|
pm_runtime_idle(wm8994->dev);
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
wm8994_irq_exit(wm8994);
|
|
err_enable:
|
|
regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
err:
|
|
mfd_remove_devices(wm8994->dev);
|
|
return ret;
|
|
}
|
|
|
|
static void wm8994_device_exit(struct wm8994 *wm8994)
|
|
{
|
|
pm_runtime_disable(wm8994->dev);
|
|
mfd_remove_devices(wm8994->dev);
|
|
wm8994_irq_exit(wm8994);
|
|
regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
}
|
|
|
|
static const struct of_device_id wm8994_of_match[] = {
|
|
{ .compatible = "wlf,wm1811", },
|
|
{ .compatible = "wlf,wm8994", },
|
|
{ .compatible = "wlf,wm8958", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, wm8994_of_match);
|
|
|
|
static int wm8994_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8994 *wm8994;
|
|
int ret;
|
|
|
|
wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
|
|
if (wm8994 == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, wm8994);
|
|
wm8994->dev = &i2c->dev;
|
|
wm8994->irq = i2c->irq;
|
|
wm8994->type = id->driver_data;
|
|
|
|
wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
|
|
if (IS_ERR(wm8994->regmap)) {
|
|
ret = PTR_ERR(wm8994->regmap);
|
|
dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return wm8994_device_init(wm8994, i2c->irq);
|
|
}
|
|
|
|
static int wm8994_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
|
|
|
|
wm8994_device_exit(wm8994);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8994_i2c_id[] = {
|
|
{ "wm1811", WM1811 },
|
|
{ "wm1811a", WM1811 },
|
|
{ "wm8994", WM8994 },
|
|
{ "wm8958", WM8958 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
|
|
|
|
static const struct dev_pm_ops wm8994_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
|
|
};
|
|
|
|
static struct i2c_driver wm8994_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8994",
|
|
.owner = THIS_MODULE,
|
|
.pm = &wm8994_pm_ops,
|
|
.of_match_table = wm8994_of_match,
|
|
},
|
|
.probe = wm8994_i2c_probe,
|
|
.remove = wm8994_i2c_remove,
|
|
.id_table = wm8994_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(wm8994_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|