kernel-ark/drivers/acpi/hardware/hwgpe.c
Robert Moore 44f6c01242 ACPICA 20050408 from Bob Moore
Fixed three cases in the interpreter where an "index"
argument to an ASL function was still (internally) 32
bits instead of the required 64 bits.  This was the Index
argument to the Index, Mid, and Match operators.

The "strupr" function is now permanently local
(acpi_ut_strupr), since this is not a POSIX-defined
function and not present in most kernel-level C
libraries. References to the C library strupr function
have been removed from the headers.

Completed the deployment of static
functions/prototypes. All prototypes with the static
attribute have been moved from the headers to the owning
C file.

ACPICA 20050329 from Bob Moore

An error is now generated if an attempt is made to create
a Buffer Field of length zero (A CreateField with a length
operand of zero.)

The interpreter now issues a warning whenever executable
code at the module level is detected during ACPI table
load. This will give some idea of the prevalence of this
type of code.

Implemented support for references to named objects (other
than control methods) within package objects.

Enhanced package object output for the debug
object. Package objects are now completely dumped, showing
all elements.

Enhanced miscellaneous object output for the debug
object. Any object can now be written to the debug object
(for example, a device object can be written, and the type
of the object will be displayed.)

The "static" qualifier has been added to all local
functions across the core subsystem.

The number of "long" lines (> 80 chars) within the source
has been significantly reduced, by about 1/3.

Cleaned up all header files to ensure that all CA/iASL
functions are prototyped (even static functions) and the
formatting is consistent.

Two new header files have been added, acopcode.h and
acnames.h.

Removed several obsolete functions that were no longer
used.

Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 00:08:52 -04:00

454 lines
12 KiB
C

/******************************************************************************
*
* Module Name: hwgpe - Low level GPE enable/disable/clear functions
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acevents.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME ("hwgpe")
/* Local prototypes */
static acpi_status
acpi_hw_enable_wakeup_gpe_block (
struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block);
/******************************************************************************
*
* FUNCTION: acpi_hw_write_gpe_enable_reg
*
* PARAMETERS: gpe_event_info - Info block for the GPE to be enabled
*
* RETURN: Status
*
* DESCRIPTION: Write a GPE enable register. Note: The bit for this GPE must
* already be cleared or set in the parent register
* enable_for_run mask.
*
******************************************************************************/
acpi_status
acpi_hw_write_gpe_enable_reg (
struct acpi_gpe_event_info *gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
ACPI_FUNCTION_ENTRY ();
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return (AE_NOT_EXIST);
}
/* Write the entire GPE (runtime) enable register */
status = acpi_hw_low_level_write (8, gpe_register_info->enable_for_run,
&gpe_register_info->enable_address);
return (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_clear_gpe
*
* PARAMETERS: gpe_event_info - Info block for the GPE to be cleared
*
* RETURN: Status
*
* DESCRIPTION: Clear the status bit for a single GPE.
*
******************************************************************************/
acpi_status
acpi_hw_clear_gpe (
struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
ACPI_FUNCTION_ENTRY ();
/*
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
status = acpi_hw_low_level_write (8, gpe_event_info->register_bit,
&gpe_event_info->register_info->status_address);
return (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_get_gpe_status
*
* PARAMETERS: gpe_event_info - Info block for the GPE to queried
* event_status - Where the GPE status is returned
*
* RETURN: Status
*
* DESCRIPTION: Return the status of a single GPE.
*
******************************************************************************/
#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_hw_get_gpe_status (
struct acpi_gpe_event_info *gpe_event_info,
acpi_event_status *event_status)
{
u32 in_byte;
u8 register_bit;
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
acpi_event_status local_event_status = 0;
ACPI_FUNCTION_ENTRY ();
if (!event_status) {
return (AE_BAD_PARAMETER);
}
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
/* Get the register bitmask for this GPE */
register_bit = gpe_event_info->register_bit;
/* GPE currently enabled? (enabled for runtime?) */
if (register_bit & gpe_register_info->enable_for_run) {
local_event_status |= ACPI_EVENT_FLAG_ENABLED;
}
/* GPE enabled for wake? */
if (register_bit & gpe_register_info->enable_for_wake) {
local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED;
}
/* GPE currently active (status bit == 1)? */
status = acpi_hw_low_level_read (8, &in_byte, &gpe_register_info->status_address);
if (ACPI_FAILURE (status)) {
goto unlock_and_exit;
}
if (register_bit & in_byte) {
local_event_status |= ACPI_EVENT_FLAG_SET;
}
/* Set return value */
(*event_status) = local_event_status;
unlock_and_exit:
return (status);
}
#endif /* ACPI_FUTURE_USAGE */
/******************************************************************************
*
* FUNCTION: acpi_hw_disable_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Disable all GPEs within a single GPE block
*
******************************************************************************/
acpi_status
acpi_hw_disable_gpe_block (
struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
/* Disable all GPEs in this register */
status = acpi_hw_low_level_write (8, 0x00,
&gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE (status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_clear_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Clear status bits for all GPEs within a single GPE block
*
******************************************************************************/
acpi_status
acpi_hw_clear_gpe_block (
struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
/* Clear status on all GPEs in this register */
status = acpi_hw_low_level_write (8, 0xFF,
&gpe_block->register_info[i].status_address);
if (ACPI_FAILURE (status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_runtime_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
* combination wake/run GPEs.
*
******************************************************************************/
acpi_status
acpi_hw_enable_runtime_gpe_block (
struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block)
{
u32 i;
acpi_status status;
/* NOTE: assumes that all GPEs are currently disabled */
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
if (!gpe_block->register_info[i].enable_for_run) {
continue;
}
/* Enable all "runtime" GPEs in this register */
status = acpi_hw_low_level_write (8, gpe_block->register_info[i].enable_for_run,
&gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE (status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_wakeup_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
* gpe_block - Gpe Block info
*
* RETURN: Status
*
* DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
* combination wake/run GPEs.
*
******************************************************************************/
static acpi_status
acpi_hw_enable_wakeup_gpe_block (
struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block)
{
u32 i;
acpi_status status;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
if (!gpe_block->register_info[i].enable_for_wake) {
continue;
}
/* Enable all "wake" GPEs in this register */
status = acpi_hw_low_level_write (8,
gpe_block->register_info[i].enable_for_wake,
&gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE (status)) {
return (status);
}
}
return (AE_OK);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_disable_all_gpes
*
* PARAMETERS: Flags - ACPI_NOT_ISR or ACPI_ISR
*
* RETURN: Status
*
* DESCRIPTION: Disable and clear all GPEs in all GPE blocks
*
******************************************************************************/
acpi_status
acpi_hw_disable_all_gpes (
u32 flags)
{
acpi_status status;
ACPI_FUNCTION_TRACE ("hw_disable_all_gpes");
status = acpi_ev_walk_gpe_list (acpi_hw_disable_gpe_block, flags);
status = acpi_ev_walk_gpe_list (acpi_hw_clear_gpe_block, flags);
return_ACPI_STATUS (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_all_runtime_gpes
*
* PARAMETERS: Flags - ACPI_NOT_ISR or ACPI_ISR
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status
acpi_hw_enable_all_runtime_gpes (
u32 flags)
{
acpi_status status;
ACPI_FUNCTION_TRACE ("hw_enable_all_runtime_gpes");
status = acpi_ev_walk_gpe_list (acpi_hw_enable_runtime_gpe_block, flags);
return_ACPI_STATUS (status);
}
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_all_wakeup_gpes
*
* PARAMETERS: Flags - ACPI_NOT_ISR or ACPI_ISR
*
* RETURN: Status
*
* DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status
acpi_hw_enable_all_wakeup_gpes (
u32 flags)
{
acpi_status status;
ACPI_FUNCTION_TRACE ("hw_enable_all_wakeup_gpes");
status = acpi_ev_walk_gpe_list (acpi_hw_enable_wakeup_gpe_block, flags);
return_ACPI_STATUS (status);
}