kernel-ark/drivers/regulator
Mark Brown da07ecd93b regulator: Implement deferred disable support
It is a reasonably common pattern for hardware to require some delay after
being quiesced before the disable has finalised, especially in mixed signal
devices. For example, an active discharge may be required to ensure that
the circuit starts up again in a known state. Avoid having to implement
such delays in the regulator API by providing regulator_deferred_disable()
which will do a regulator_disable() a specified number of milliseconds
after it is called.

Due to the reference counting done on regulators a deferred disable can
be cancelled by doing another regulator_enable().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-14 10:58:23 +01:00
..
88pm8607.c regulator: Fix 88pm8607.c printk format warning 2011-05-26 19:47:29 +02:00
aat2870-regulator.c regulator: aat2870: Add AAT2870 regulator driver 2011-07-31 23:28:26 +02:00
ab3100.c mfd: Use mfd cell platform_data for ab3100 cells platform bits 2011-05-26 19:44:58 +02:00
ab8500.c regulator: add ab8500 enable and raise time delays 2011-03-26 14:15:06 +00:00
ad5398.c i2c: Remove obsolete cleanup for clientdata 2010-09-30 14:14:22 +02:00
bq24022.c
core.c regulator: Implement deferred disable support 2011-09-14 10:58:23 +01:00
da903x.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
db8500-prcmu.c regulator: db8500-prcmu: small fixes 2011-07-08 19:14:57 +01:00
dummy.c regulator: Properly register dummy regulator driver 2011-06-08 20:15:34 +01:00
dummy.h regulator: fix build when CONFIG_REGULATOR_DUMMY=n 2010-10-28 22:40:32 +01:00
fixed.c
isl6271a-regulator.c regulator: missing index in PTR_ERR() in isl6271a_probe() 2011-01-12 14:33:06 +00:00
Kconfig regulator: aat2870: Add AAT2870 regulator driver 2011-07-31 23:28:26 +02:00
lp3971.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
lp3972.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
Makefile regulator: aat2870: Add AAT2870 regulator driver 2011-07-31 23:28:26 +02:00
max1586.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
max8649.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
max8660.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
max8925-regulator.c regulator: Enable max8925 i2c sequence for control 2011-05-26 19:45:33 +02:00
max8952.c regulator: max8952 - fix wrong gpio valid check 2011-07-08 19:14:57 +01:00
max8997.c regulator: max8997: Fix setting inappropriate value for ramp_delay variable 2011-07-08 19:14:58 +01:00
max8998.c regulator: Fix memory leak in max8998_pmic_probe failure path 2011-05-27 10:49:09 +01:00
mc13xxx-regulator-core.c regulator: Fix off-by-one value range checking for mc13xxx_regulator_get_voltage 2011-05-27 10:49:10 +01:00
mc13xxx.h make mc13783 regulator code generic 2011-01-12 14:33:03 +00:00
mc13783-regulator.c mfd: Use mfd cell platform_data for mc13xxx cells platform bits 2011-05-26 19:45:07 +02:00
mc13892-regulator.c regulator: mc13892: Fix voltage unit in test case. 2011-05-27 10:49:10 +01:00
pcap-regulator.c regulator: Fix typo in PCAP regulator_set_voltage() 2011-01-12 14:33:00 +00:00
pcf50633-regulator.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
tps6105x-regulator.c regulator: Add missing platform_set_drvdata in tps6105x_regulator_probe 2011-05-27 10:34:36 +01:00
tps6507x-regulator.c regulator: Fix desc_id for tps65023/6507x/65910 2011-05-27 10:49:09 +01:00
tps6524x-regulator.c regulator: fix tps6524x section mismatch 2011-03-26 14:15:06 +00:00
tps6586x-regulator.c regulator: Report actual configured voltage to set_voltage() 2011-01-12 14:32:59 +00:00
tps65023-regulator.c regulator: Convert tps65023 to use regmap API 2011-07-23 07:57:02 +01:00
tps65910-regulator.c regulator: tps65910: Fix array access out of bounds bug 2011-07-22 11:41:57 +01:00
tps65912-regulator.c regulator: Storing tps65912 error codes in u8 2011-07-31 23:28:26 +02:00
twl-regulator.c regulator: TWL: Remove entry of RES_ID for 6030 macros 2011-07-22 11:30:05 +01:00
userspace-consumer.c
virtual.c
wm831x-dcdc.c regulator: Improve WM831x DVS VSEL selection algorithm 2011-07-28 10:20:49 +01:00
wm831x-isink.c regulator: Convert WM831x regulators to genirq 2011-03-26 14:15:04 +00:00
wm831x-ldo.c regulator: Fix WM831x regulator ID lookups for multiple WM831xs 2011-07-28 10:20:48 +01:00
wm8350-regulator.c regulator: Convert WM835x to use get_voltage_sel() 2011-01-12 14:33:04 +00:00
wm8400-regulator.c regulator: Convert WM8400 to get_voltage_sel() 2011-05-27 10:34:37 +01:00
wm8994-regulator.c regulator: Use _cansleep() for WM8994 regulator GPIOs 2011-05-30 11:56:58 +01:00