kernel-ark/drivers/usb/serial/Makefile
Johan Hovold f8c0e057b4 USB: serial: remove zte_ev driver
The zte_ev driver is based on code (once) distributed by ZTE that still
appears to originally have been reverse-engineered and bolted onto the
generic driver.

A closer analysis of the zte_ev setup code reveals that it consists of
standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE)
but unfortunately fails to get some of those right. In particular, as
reported by Lei Liu, it fails to lower DTR/RTS on close. It also appears
that the control requests lack the interface argument.

Since line control is already handled properly by the option driver, and
the SET/GET_LINE_CODING requests appears to be redundant (amounts to a
SET 9600 8N1) let's remove the redundant zte_ev driver.

Also move the remaining ZTE PIDs to the generic option modem driver.

Reported-by: Lei Liu <liu.lei78@zte.com.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-15 18:43:08 +02:00

63 lines
2.6 KiB
Makefile

#
# Makefile for the USB serial device drivers.
#
# Object file lists.
obj-$(CONFIG_USB_SERIAL) += usbserial.o
usbserial-y := usb-serial.o generic.o bus.o
usbserial-$(CONFIG_USB_SERIAL_CONSOLE) += console.o
obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o
obj-$(CONFIG_USB_SERIAL_CP210X) += cp210x.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o
obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o
obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT) += digi_acceleport.o
obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o
obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o
obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o
obj-$(CONFIG_USB_SERIAL_F81232) += f81232.o
obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o
obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o
obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o
obj-$(CONFIG_USB_SERIAL_IPW) += ipw.o
obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o
obj-$(CONFIG_USB_SERIAL_IUU) += iuu_phoenix.o
obj-$(CONFIG_USB_SERIAL_KEYSPAN) += keyspan.o
obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o
obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o
obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o
obj-$(CONFIG_USB_SERIAL_QT2) += quatech2.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_SIMPLE) += usb-serial-simple.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o
obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o
obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o