kernel-ark/drivers/net/wireless/ath/ath9k/wow.c
Sujith Manoharan ca529c9373 ath9k: Fix interface accounting
Currently, the interface count is maintained globally,
but this causes problems in RX filter calculation.
Make the interface count a per-channel-context variable
to fix this.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09 15:27:21 -04:00

363 lines
9.4 KiB
C

/*
* Copyright (c) 2013 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "ath9k.h"
static const struct wiphy_wowlan_support ath9k_wowlan_support = {
.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
.n_patterns = MAX_NUM_USER_PATTERN,
.pattern_min_len = 1,
.pattern_max_len = MAX_PATTERN_SIZE,
};
static void ath9k_wow_map_triggers(struct ath_softc *sc,
struct cfg80211_wowlan *wowlan,
u32 *wow_triggers)
{
if (wowlan->disconnect)
*wow_triggers |= AH_WOW_LINK_CHANGE |
AH_WOW_BEACON_MISS;
if (wowlan->magic_pkt)
*wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
if (wowlan->n_patterns)
*wow_triggers |= AH_WOW_USER_PATTERN_EN;
sc->wow_enabled = *wow_triggers;
}
static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
int pattern_count = 0;
int i, byte_cnt;
u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
u8 dis_deauth_mask[MAX_PATTERN_SIZE];
memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
/*
* Create Dissassociate / Deauthenticate packet filter
*
* 2 bytes 2 byte 6 bytes 6 bytes 6 bytes
* +--------------+----------+---------+--------+--------+----
* + Frame Control+ Duration + DA + SA + BSSID +
* +--------------+----------+---------+--------+--------+----
*
* The above is the management frame format for disassociate/
* deauthenticate pattern, from this we need to match the first byte
* of 'Frame Control' and DA, SA, and BSSID fields
* (skipping 2nd byte of FC and Duration feild.
*
* Disassociate pattern
* --------------------
* Frame control = 00 00 1010
* DA, SA, BSSID = x:x:x:x:x:x
* Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
* | x:x:x:x:x:x -- 22 bytes
*
* Deauthenticate pattern
* ----------------------
* Frame control = 00 00 1100
* DA, SA, BSSID = x:x:x:x:x:x
* Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
* | x:x:x:x:x:x -- 22 bytes
*/
/* Create Disassociate Pattern first */
byte_cnt = 0;
/* Fill out the mask with all FF's */
for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
dis_deauth_mask[i] = 0xff;
/* copy the first byte of frame control field */
dis_deauth_pattern[byte_cnt] = 0xa0;
byte_cnt++;
/* skip 2nd byte of frame control and Duration field */
byte_cnt += 3;
/*
* need not match the destination mac address, it can be a broadcast
* mac address or an unicast to this station
*/
byte_cnt += 6;
/* copy the source mac address */
memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
byte_cnt += 6;
/* copy the bssid, its same as the source mac address */
memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
/* Create Disassociate pattern mask */
dis_deauth_mask[0] = 0xfe;
dis_deauth_mask[1] = 0x03;
dis_deauth_mask[2] = 0xc0;
ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
pattern_count, byte_cnt);
pattern_count++;
/*
* for de-authenticate pattern, only the first byte of the frame
* control field gets changed from 0xA0 to 0xC0
*/
dis_deauth_pattern[0] = 0xC0;
ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
pattern_count, byte_cnt);
}
static void ath9k_wow_add_pattern(struct ath_softc *sc,
struct cfg80211_wowlan *wowlan)
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_wow_pattern *wow_pattern = NULL;
struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
int mask_len;
s8 i = 0;
if (!wowlan->n_patterns)
return;
/*
* Add the new user configured patterns
*/
for (i = 0; i < wowlan->n_patterns; i++) {
wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
if (!wow_pattern)
return;
/*
* TODO: convert the generic user space pattern to
* appropriate chip specific/802.11 pattern.
*/
mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
patterns[i].pattern_len);
memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
wow_pattern->pattern_len = patterns[i].pattern_len;
/*
* just need to take care of deauth and disssoc pattern,
* make sure we don't overwrite them.
*/
ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
wow_pattern->mask_bytes,
i + 2,
wow_pattern->pattern_len);
kfree(wow_pattern);
}
}
int ath9k_suspend(struct ieee80211_hw *hw,
struct cfg80211_wowlan *wowlan)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
u32 wow_triggers_enabled = 0;
int ret = 0;
ath9k_deinit_channel_context(sc);
mutex_lock(&sc->mutex);
ath_cancel_work(sc);
ath_stop_ani(sc);
if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
ath_dbg(common, ANY, "Device not present\n");
ret = -EINVAL;
goto fail_wow;
}
if (WARN_ON(!wowlan)) {
ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
ret = -EINVAL;
goto fail_wow;
}
if (!device_can_wakeup(sc->dev)) {
ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
ret = 1;
goto fail_wow;
}
/*
* none of the sta vifs are associated
* and we are not currently handling multivif
* cases, for instance we have to seperately
* configure 'keep alive frame' for each
* STA.
*/
if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
ath_dbg(common, WOW, "None of the STA vifs are associated\n");
ret = 1;
goto fail_wow;
}
if (sc->cur_chan->nvifs > 1) {
ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
ret = 1;
goto fail_wow;
}
ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
wow_triggers_enabled);
ath9k_ps_wakeup(sc);
ath9k_stop_btcoex(sc);
/*
* Enable wake up on recieving disassoc/deauth
* frame by default.
*/
ath9k_wow_add_disassoc_deauth_pattern(sc);
if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
ath9k_wow_add_pattern(sc, wowlan);
spin_lock_bh(&sc->sc_pcu_lock);
/*
* To avoid false wake, we enable beacon miss interrupt only
* when we go to sleep. We save the current interrupt mask
* so we can restore it after the system wakes up
*/
sc->wow_intr_before_sleep = ah->imask;
ah->imask &= ~ATH9K_INT_GLOBAL;
ath9k_hw_disable_interrupts(ah);
ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
ath9k_hw_set_interrupts(ah);
ath9k_hw_enable_interrupts(ah);
spin_unlock_bh(&sc->sc_pcu_lock);
/*
* we can now sync irq and kill any running tasklets, since we already
* disabled interrupts and not holding a spin lock
*/
synchronize_irq(sc->irq);
tasklet_kill(&sc->intr_tq);
ath9k_hw_wow_enable(ah, wow_triggers_enabled);
ath9k_ps_restore(sc);
ath_dbg(common, ANY, "WoW enabled in ath9k\n");
atomic_inc(&sc->wow_sleep_proc_intr);
fail_wow:
mutex_unlock(&sc->mutex);
return ret;
}
int ath9k_resume(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
u32 wow_status;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
ath9k_hw_disable_interrupts(ah);
ah->imask = sc->wow_intr_before_sleep;
ath9k_hw_set_interrupts(ah);
ath9k_hw_enable_interrupts(ah);
spin_unlock_bh(&sc->sc_pcu_lock);
wow_status = ath9k_hw_wow_wakeup(ah);
if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
/*
* some devices may not pick beacon miss
* as the reason they woke up so we add
* that here for that shortcoming.
*/
wow_status |= AH_WOW_BEACON_MISS;
atomic_dec(&sc->wow_got_bmiss_intr);
ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
}
atomic_dec(&sc->wow_sleep_proc_intr);
if (wow_status) {
ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
ath9k_hw_wow_event_to_string(wow_status), wow_status);
}
ath_restart_work(sc);
ath9k_start_btcoex(sc);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
return 0;
}
void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
{
struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
device_init_wakeup(sc->dev, 1);
device_set_wakeup_enable(sc->dev, enabled);
mutex_unlock(&sc->mutex);
}
void ath9k_init_wow(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
(sc->driver_data & ATH9K_PCI_WOW) &&
device_can_wakeup(sc->dev))
hw->wiphy->wowlan = &ath9k_wowlan_support;
atomic_set(&sc->wow_sleep_proc_intr, -1);
atomic_set(&sc->wow_got_bmiss_intr, -1);
}