kernel-ark/drivers/mfd/da9063-core.c
Opensource [Steve Twiss] 9cb42e2a8e mfd: da9063: Add support for AD silicon variant
Add register definitions for DA9063 AD (0x3) silicon variant ID
the ability to choose the silicon variant at run-time using regmap
configuration. This patch also adds RTC support for the AD silicon
changes.

It adds both BB and AD support as regmap ranges and then makes the
distinction between the two tables at run-time. This allows both AD
and BB silicon variants to be supported at the same time.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28 08:09:25 +01:00

189 lines
4.3 KiB
C

/*
* da9063-core.c: Device access for Dialog DA9063 modules
*
* Copyright 2012 Dialog Semiconductors Ltd.
* Copyright 2013 Philipp Zabel, Pengutronix
*
* Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>,
* Michal Hajduk <michal.hajduk@diasemi.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
#include <linux/regmap.h>
#include <linux/mfd/da9063/core.h>
#include <linux/mfd/da9063/pdata.h>
#include <linux/mfd/da9063/registers.h>
#include <linux/proc_fs.h>
#include <linux/kthread.h>
#include <linux/uaccess.h>
static struct resource da9063_regulators_resources[] = {
{
.name = "LDO_LIM",
.start = DA9063_IRQ_LDO_LIM,
.end = DA9063_IRQ_LDO_LIM,
.flags = IORESOURCE_IRQ,
},
};
static struct resource da9063_rtc_resources[] = {
{
.name = "ALARM",
.start = DA9063_IRQ_ALARM,
.end = DA9063_IRQ_ALARM,
.flags = IORESOURCE_IRQ,
},
{
.name = "TICK",
.start = DA9063_IRQ_TICK,
.end = DA9063_IRQ_TICK,
.flags = IORESOURCE_IRQ,
}
};
static struct resource da9063_onkey_resources[] = {
{
.start = DA9063_IRQ_ONKEY,
.end = DA9063_IRQ_ONKEY,
.flags = IORESOURCE_IRQ,
},
};
static struct resource da9063_hwmon_resources[] = {
{
.start = DA9063_IRQ_ADC_RDY,
.end = DA9063_IRQ_ADC_RDY,
.flags = IORESOURCE_IRQ,
},
};
static const struct mfd_cell da9063_devs[] = {
{
.name = DA9063_DRVNAME_REGULATORS,
.num_resources = ARRAY_SIZE(da9063_regulators_resources),
.resources = da9063_regulators_resources,
},
{
.name = DA9063_DRVNAME_LEDS,
},
{
.name = DA9063_DRVNAME_WATCHDOG,
},
{
.name = DA9063_DRVNAME_HWMON,
.num_resources = ARRAY_SIZE(da9063_hwmon_resources),
.resources = da9063_hwmon_resources,
},
{
.name = DA9063_DRVNAME_ONKEY,
.num_resources = ARRAY_SIZE(da9063_onkey_resources),
.resources = da9063_onkey_resources,
},
{
.name = DA9063_DRVNAME_RTC,
.num_resources = ARRAY_SIZE(da9063_rtc_resources),
.resources = da9063_rtc_resources,
},
{
.name = DA9063_DRVNAME_VIBRATION,
},
};
int da9063_device_init(struct da9063 *da9063, unsigned int irq)
{
struct da9063_pdata *pdata = da9063->dev->platform_data;
int model, variant_id, variant_code;
int ret;
if (pdata) {
da9063->flags = pdata->flags;
da9063->irq_base = pdata->irq_base;
} else {
da9063->flags = 0;
da9063->irq_base = 0;
}
da9063->chip_irq = irq;
if (pdata && pdata->init != NULL) {
ret = pdata->init(da9063);
if (ret != 0) {
dev_err(da9063->dev,
"Platform initialization failed.\n");
return ret;
}
}
ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
if (ret < 0) {
dev_err(da9063->dev, "Cannot read chip model id.\n");
return -EIO;
}
if (model != PMIC_DA9063) {
dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model);
return -ENODEV;
}
ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id);
if (ret < 0) {
dev_err(da9063->dev, "Cannot read chip variant id.\n");
return -EIO;
}
variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT;
dev_info(da9063->dev,
"Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
model, variant_id);
if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) {
dev_err(da9063->dev,
"Cannot support variant code: 0x%02X\n", variant_code);
return -ENODEV;
}
da9063->model = model;
da9063->variant_code = variant_code;
ret = da9063_irq_init(da9063);
if (ret) {
dev_err(da9063->dev, "Cannot initialize interrupts.\n");
return ret;
}
ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
NULL);
if (ret)
dev_err(da9063->dev, "Cannot add MFD cells\n");
return ret;
}
void da9063_device_exit(struct da9063 *da9063)
{
mfd_remove_devices(da9063->dev);
da9063_irq_exit(da9063);
}
MODULE_DESCRIPTION("PMIC driver for Dialog DA9063");
MODULE_AUTHOR("Krystian Garbaciak <krystian.garbaciak@diasemi.com>, Michal Hajduk <michal.hajduk@diasemi.com>");
MODULE_LICENSE("GPL");