davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5d4a5e770d
kernel-ark/drivers/extcon/extcon-arizona.c
Charles Keepax 17271f608b extcon: arizona: Get MICVDD against extcon device 
Previously we would do a regulator get against the main Arizona device
to obtain the MICVDD regulator. Arizona is an MFD device and normally
MICVDD will be supplied by one of its children (the arizona-micsupp
regulator). As devres destruction for the MFD device will run after all
its children have been destroyed, the regulator will be destroyed before
devres calls regulator_put. This causes a warning from both the
destruction of the child node, as the regulator is still open, and from
the put of the regulator as the regulator device has already been
destroyed.

A simple fix here is to get the regulator against the extcon device
itself such that devres runs when the child is destroyed. This has the
additional benefit that if for some reason the extcon driver is unloaded
the regulator reference won't hang around until the MFD is unloaded.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-07-23 10:07:42 +09:00

1484 lines
38 KiB
C
Raw Blame History

/*
* extcon-arizona.c - Extcon driver Wolfson Arizona devices
*
* Copyright (C) 2012 Wolfson Microelectronics plc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/extcon.h>
#include <sound/soc.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
#define ARIZONA_MAX_MICD_RANGE 8
#define ARIZONA_ACCDET_MODE_MIC 0
#define ARIZONA_ACCDET_MODE_HPL 1
#define ARIZONA_ACCDET_MODE_HPR 2
#define ARIZONA_MICD_CLAMP_MODE_JDL 0x4
#define ARIZONA_MICD_CLAMP_MODE_JDH 0x5
#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb
#define ARIZONA_HPDET_MAX 10000
#define HPDET_DEBOUNCE 500
#define DEFAULT_MICD_TIMEOUT 2000
#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \
ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \
ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \
ARIZONA_MICD_LVL_7)
#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7)
#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8)
struct arizona_extcon_info {
struct device *dev;
struct arizona *arizona;
struct mutex lock;
struct regulator *micvdd;
struct input_dev *input;
u16 last_jackdet;
int micd_mode;
const struct arizona_micd_config *micd_modes;
int micd_num_modes;
const struct arizona_micd_range *micd_ranges;
int num_micd_ranges;
int micd_timeout;
bool micd_reva;
bool micd_clamp;
struct delayed_work hpdet_work;
struct delayed_work micd_detect_work;
struct delayed_work micd_timeout_work;
bool hpdet_active;
bool hpdet_done;
bool hpdet_retried;
int num_hpdet_res;
unsigned int hpdet_res[3];
bool mic;
bool detecting;
int jack_flips;
int hpdet_ip;
struct extcon_dev *edev;
};
static const struct arizona_micd_config micd_default_modes[] = {
{ ARIZONA_ACCDET_SRC, 1, 0 },
{ 0, 2, 1 },
};
static const struct arizona_micd_range micd_default_ranges[] = {
{ .max = 11, .key = BTN_0 },
{ .max = 28, .key = BTN_1 },
{ .max = 54, .key = BTN_2 },
{ .max = 100, .key = BTN_3 },
{ .max = 186, .key = BTN_4 },
{ .max = 430, .key = BTN_5 },
};
static const int arizona_micd_levels[] = {
3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46,
49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100,
105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245,
270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071,
1257,
};
#define ARIZONA_CABLE_MECHANICAL 0
#define ARIZONA_CABLE_MICROPHONE 1
#define ARIZONA_CABLE_HEADPHONE 2
#define ARIZONA_CABLE_LINEOUT 3
static const char *arizona_cable[] = {
"Mechanical",
"Microphone",
"Headphone",
"Line-out",
NULL,
};
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
unsigned int magic)
{
struct arizona *arizona = info->arizona;
int ret;
mutex_lock(&arizona->dapm->card->dapm_mutex);
arizona->hpdet_magic = magic;
/* Keep the HP output stages disabled while doing the magic */
if (magic) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
ARIZONA_OUT1R_ENA, 0);
if (ret != 0)
dev_warn(arizona->dev,
"Failed to disable headphone outputs: %d\n",
ret);
}
ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
magic);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n",
ret);
ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
magic);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n",
ret);
/* Restore the desired state while not doing the magic */
if (!magic) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
ARIZONA_OUT1L_ENA |
ARIZONA_OUT1R_ENA, arizona->hp_ena);
if (ret != 0)
dev_warn(arizona->dev,
"Failed to restore headphone outputs: %d\n",
ret);
}
mutex_unlock(&arizona->dapm->card->dapm_mutex);
}
static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
{
struct arizona *arizona = info->arizona;
mode %= info->micd_num_modes;
if (arizona->pdata.micd_pol_gpio > 0)
gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
info->micd_modes[mode].gpio);
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_BIAS_SRC_MASK,
info->micd_modes[mode].bias <<
ARIZONA_MICD_BIAS_SRC_SHIFT);
regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
info->micd_mode = mode;
dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
}
static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
{
switch (info->micd_modes[0].bias) {
case 1:
return "MICBIAS1";
case 2:
return "MICBIAS2";
case 3:
return "MICBIAS3";
default:
return "MICVDD";
}
}
static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
const char *widget = arizona_extcon_get_micbias(info);
struct snd_soc_dapm_context *dapm = arizona->dapm;
int ret;
ret = snd_soc_dapm_force_enable_pin(dapm, widget);
if (ret != 0)
dev_warn(arizona->dev, "Failed to enable %s: %d\n",
widget, ret);
snd_soc_dapm_sync(dapm);
if (!arizona->pdata.micd_force_micbias) {
ret = snd_soc_dapm_disable_pin(arizona->dapm, widget);
if (ret != 0)
dev_warn(arizona->dev, "Failed to disable %s: %d\n",
widget, ret);
snd_soc_dapm_sync(dapm);
}
}
static void arizona_start_mic(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
bool change;
int ret;
/* Microphone detection can't use idle mode */
pm_runtime_get(info->dev);
if (info->detecting) {
ret = regulator_allow_bypass(info->micvdd, false);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to regulate MICVDD: %d\n",
ret);
}
}
ret = regulator_enable(info->micvdd);
if (ret != 0) {
dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
ret);
}
if (info->micd_reva) {
regmap_write(arizona->regmap, 0x80, 0x3);
regmap_write(arizona->regmap, 0x294, 0);
regmap_write(arizona->regmap, 0x80, 0x0);
}
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
arizona_extcon_pulse_micbias(info);
regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
&change);
if (!change) {
regulator_disable(info->micvdd);
pm_runtime_put_autosuspend(info->dev);
}
}
static void arizona_stop_mic(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
const char *widget = arizona_extcon_get_micbias(info);
struct snd_soc_dapm_context *dapm = arizona->dapm;
bool change;
int ret;
regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_ENA, 0,
&change);
ret = snd_soc_dapm_disable_pin(dapm, widget);
if (ret != 0)
dev_warn(arizona->dev,
"Failed to disable %s: %d\n",
widget, ret);
snd_soc_dapm_sync(dapm);
if (info->micd_reva) {
regmap_write(arizona->regmap, 0x80, 0x3);
regmap_write(arizona->regmap, 0x294, 2);
regmap_write(arizona->regmap, 0x80, 0x0);
}
ret = regulator_allow_bypass(info->micvdd, true);
if (ret != 0) {
dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
ret);
}
if (change) {
regulator_disable(info->micvdd);
pm_runtime_mark_last_busy(info->dev);
pm_runtime_put_autosuspend(info->dev);
}
}
static struct {
unsigned int threshold;
unsigned int factor_a;
unsigned int factor_b;
} arizona_hpdet_b_ranges[] = {
{ 100, 5528, 362464 },
{ 169, 11084, 6186851 },
{ 169, 11065, 65460395 },
};
#define ARIZONA_HPDET_B_RANGE_MAX 0x3fb
static struct {
int min;
int max;
} arizona_hpdet_c_ranges[] = {
{ 0, 30 },
{ 8, 100 },
{ 100, 1000 },
{ 1000, 10000 },
};
static int arizona_hpdet_read(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
unsigned int val, range;
int ret;
ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read HPDET status: %d\n",
ret);
return ret;
}
switch (info->hpdet_ip) {
case 0:
if (!(val & ARIZONA_HP_DONE)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return -EAGAIN;
}
val &= ARIZONA_HP_LVL_MASK;
break;
case 1:
if (!(val & ARIZONA_HP_DONE_B)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return -EAGAIN;
}
ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read HP value: %d\n",
ret);
return -EAGAIN;
}
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
(val < arizona_hpdet_b_ranges[range].threshold ||
val >= ARIZONA_HPDET_B_RANGE_MAX)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
range);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
/* If we go out of range report top of range */
if (val < arizona_hpdet_b_ranges[range].threshold ||
val >= ARIZONA_HPDET_B_RANGE_MAX) {
dev_dbg(arizona->dev, "Measurement out of range\n");
return ARIZONA_HPDET_MAX;
}
dev_dbg(arizona->dev, "HPDET read %d in range %d\n",
val, range);
val = arizona_hpdet_b_ranges[range].factor_b
/ ((val * 100) -
arizona_hpdet_b_ranges[range].factor_a);
break;
default:
dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
info->hpdet_ip);
case 2:
if (!(val & ARIZONA_HP_DONE_B)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
val);
return -EAGAIN;
}
val &= ARIZONA_HP_LVL_B_MASK;
/* Convert to ohms, the value is in 0.5 ohm increments */
val /= 2;
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
/* Skip up a range, or report? */
if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
(val >= arizona_hpdet_c_ranges[range].max)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
arizona_hpdet_c_ranges[range].min,
arizona_hpdet_c_ranges[range].max);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
if (range && (val < arizona_hpdet_c_ranges[range].min)) {
dev_dbg(arizona->dev, "Reporting range boundary %d\n",
arizona_hpdet_c_ranges[range].min);
val = arizona_hpdet_c_ranges[range].min;
}
}
dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
return val;
}
static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
bool *mic)
{
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
/*
* If we're using HPDET for accessory identification we need
* to take multiple measurements, step through them in sequence.
*/
if (arizona->pdata.hpdet_acc_id) {
info->hpdet_res[info->num_hpdet_res++] = *reading;
/* Only check the mic directly if we didn't already ID it */
if (id_gpio && info->num_hpdet_res == 1) {
dev_dbg(arizona->dev, "Measuring mic\n");
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK |
ARIZONA_ACCDET_SRC,
ARIZONA_ACCDET_MODE_HPR |
info->micd_modes[0].src);
gpio_set_value_cansleep(id_gpio, 1);
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
return -EAGAIN;
}
/* OK, got both. Now, compare... */
dev_dbg(arizona->dev, "HPDET measured %d %d\n",
info->hpdet_res[0], info->hpdet_res[1]);
/* Take the headphone impedance for the main report */
*reading = info->hpdet_res[0];
/* Sometimes we get false readings due to slow insert */
if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) {
dev_dbg(arizona->dev, "Retrying high impedance\n");
info->num_hpdet_res = 0;
info->hpdet_retried = true;
arizona_start_hpdet_acc_id(info);
pm_runtime_put(info->dev);
return -EAGAIN;
}
/*
* If we measure the mic as high impedance
*/
if (!id_gpio || info->hpdet_res[1] > 50) {
dev_dbg(arizona->dev, "Detected mic\n");
*mic = true;
info->detecting = true;
} else {
dev_dbg(arizona->dev, "Detected headphone\n");
}
/* Make sure everything is reset back to the real polarity */
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC,
info->micd_modes[0].src);
}
return 0;
}
static irqreturn_t arizona_hpdet_irq(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
int report = ARIZONA_CABLE_HEADPHONE;
int ret, reading;
bool mic = false;
mutex_lock(&info->lock);
/* If we got a spurious IRQ for some reason then ignore it */
if (!info->hpdet_active) {
dev_warn(arizona->dev, "Spurious HPDET IRQ\n");
mutex_unlock(&info->lock);
return IRQ_NONE;
}
/* If the cable was removed while measuring ignore the result */
ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
goto out;
} else if (!ret) {
dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
goto done;
}
ret = arizona_hpdet_read(info);
if (ret == -EAGAIN)
goto out;
else if (ret < 0)
goto done;
reading = ret;
/* Reset back to starting range */
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
0);
ret = arizona_hpdet_do_id(info, &reading, &mic);
if (ret == -EAGAIN)
goto out;
else if (ret < 0)
goto done;
/* Report high impedence cables as line outputs */
if (reading >= 5000)
report = ARIZONA_CABLE_LINEOUT;
else
report = ARIZONA_CABLE_HEADPHONE;
ret = extcon_set_cable_state_(info->edev, report, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
done:
/* Reset back to starting range */
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
0);
arizona_extcon_do_magic(info, 0);
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
/* Revert back to MICDET mode */
regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* If we have a mic then reenable MICDET */
if (mic || info->mic)
arizona_start_mic(info);
if (info->hpdet_active) {
pm_runtime_put_autosuspend(info->dev);
info->hpdet_active = false;
}
info->hpdet_done = true;
out:
mutex_unlock(&info->lock);
return IRQ_HANDLED;
}
static void arizona_identify_headphone(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
int ret;
if (info->hpdet_done)
return;
dev_dbg(arizona->dev, "Starting HPDET\n");
/* Make sure we keep the device enabled during the measurement */
pm_runtime_get(info->dev);
info->hpdet_active = true;
if (info->mic)
arizona_stop_mic(info);
arizona_extcon_do_magic(info, 0x4000);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK,
ARIZONA_ACCDET_MODE_HPL);
if (ret != 0) {
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
goto err;
}
ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
if (ret != 0) {
dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
ret);
goto err;
}
return;
err:
regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
if (info->mic)
arizona_start_mic(info);
info->hpdet_active = false;
}
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
int hp_reading = 32;
bool mic;
int ret;
dev_dbg(arizona->dev, "Starting identification via HPDET\n");
/* Make sure we keep the device enabled during the measurement */
pm_runtime_get_sync(info->dev);
info->hpdet_active = true;
arizona_extcon_do_magic(info, 0x4000);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
info->micd_modes[0].src |
ARIZONA_ACCDET_MODE_HPL);
if (ret != 0) {
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
goto err;
}
if (arizona->pdata.hpdet_acc_id_line) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_POLL, ARIZONA_HP_POLL);
if (ret != 0) {
dev_err(arizona->dev,
"Can't start HPDETL measurement: %d\n",
ret);
goto err;
}
} else {
arizona_hpdet_do_id(info, &hp_reading, &mic);
}
return;
err:
regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
info->hpdet_active = false;
}
static void arizona_micd_timeout_work(struct work_struct *work)
{
struct arizona_extcon_info *info = container_of(work,
struct arizona_extcon_info,
micd_timeout_work.work);
mutex_lock(&info->lock);
dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n");
arizona_identify_headphone(info);
info->detecting = false;
arizona_stop_mic(info);
mutex_unlock(&info->lock);
}
static void arizona_micd_detect(struct work_struct *work)
{
struct arizona_extcon_info *info = container_of(work,
struct arizona_extcon_info,
micd_detect_work.work);
struct arizona *arizona = info->arizona;
unsigned int val = 0, lvl;
int ret, i, key;
cancel_delayed_work_sync(&info->micd_timeout_work);
mutex_lock(&info->lock);
/* If the cable was removed while measuring ignore the result */
ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
mutex_unlock(&info->lock);
return;
} else if (!ret) {
dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
mutex_unlock(&info->lock);
return;
}
for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) {
ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to read MICDET: %d\n", ret);
mutex_unlock(&info->lock);
return;
}
dev_dbg(arizona->dev, "MICDET: %x\n", val);
if (!(val & ARIZONA_MICD_VALID)) {
dev_warn(arizona->dev,
"Microphone detection state invalid\n");
mutex_unlock(&info->lock);
return;
}
}
if (i == 10 && !(val & MICD_LVL_0_TO_8)) {
dev_err(arizona->dev, "Failed to get valid MICDET value\n");
mutex_unlock(&info->lock);
return;
}
/* Due to jack detect this should never happen */
if (!(val & ARIZONA_MICD_STS)) {
dev_warn(arizona->dev, "Detected open circuit\n");
info->detecting = false;
goto handled;
}
/* If we got a high impedence we should have a headset, report it. */
if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
arizona_identify_headphone(info);
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_MICROPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
ret);
/* Don't need to regulate for button detection */
ret = regulator_allow_bypass(info->micvdd, true);
if (ret != 0) {
dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
ret);
}
info->mic = true;
info->detecting = false;
goto handled;
}
/* If we detected a lower impedence during initial startup
* then we probably have the wrong polarity, flip it. Don't
* do this for the lowest impedences to speed up detection of
* plain headphones. If both polarities report a low
* impedence then give up and report headphones.
*/
if (info->detecting && (val & MICD_LVL_1_TO_7)) {
if (info->jack_flips >= info->micd_num_modes * 10) {
dev_dbg(arizona->dev, "Detected HP/line\n");
arizona_identify_headphone(info);
info->detecting = false;
arizona_stop_mic(info);
} else {
info->micd_mode++;
if (info->micd_mode == info->micd_num_modes)
info->micd_mode = 0;
arizona_extcon_set_mode(info, info->micd_mode);
info->jack_flips++;
}
goto handled;
}
/*
* If we're still detecting and we detect a short then we've
* got a headphone. Otherwise it's a button press.
*/
if (val & MICD_LVL_0_TO_7) {
if (info->mic) {
dev_dbg(arizona->dev, "Mic button detected\n");
lvl = val & ARIZONA_MICD_LVL_MASK;
lvl >>= ARIZONA_MICD_LVL_SHIFT;
for (i = 0; i < info->num_micd_ranges; i++)
input_report_key(info->input,
info->micd_ranges[i].key, 0);
WARN_ON(!lvl);
WARN_ON(ffs(lvl) - 1 >= info->num_micd_ranges);
if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) {
key = info->micd_ranges[ffs(lvl) - 1].key;
input_report_key(info->input, key, 1);
input_sync(info->input);
}
} else if (info->detecting) {
dev_dbg(arizona->dev, "Headphone detected\n");
info->detecting = false;
arizona_stop_mic(info);
arizona_identify_headphone(info);
} else {
dev_warn(arizona->dev, "Button with no mic: %x\n",
val);
}
} else {
dev_dbg(arizona->dev, "Mic button released\n");
for (i = 0; i < info->num_micd_ranges; i++)
input_report_key(info->input,
info->micd_ranges[i].key, 0);
input_sync(info->input);
arizona_extcon_pulse_micbias(info);
}
handled:
if (info->detecting)
queue_delayed_work(system_power_efficient_wq,
&info->micd_timeout_work,
msecs_to_jiffies(info->micd_timeout));
pm_runtime_mark_last_busy(info->dev);
mutex_unlock(&info->lock);
}
static irqreturn_t arizona_micdet(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int debounce = arizona->pdata.micd_detect_debounce;
cancel_delayed_work_sync(&info->micd_detect_work);
cancel_delayed_work_sync(&info->micd_timeout_work);
mutex_lock(&info->lock);
if (!info->detecting)
debounce = 0;
mutex_unlock(&info->lock);
if (debounce)
queue_delayed_work(system_power_efficient_wq,
&info->micd_detect_work,
msecs_to_jiffies(debounce));
else
arizona_micd_detect(&info->micd_detect_work.work);
return IRQ_HANDLED;
}
static void arizona_hpdet_work(struct work_struct *work)
{
struct arizona_extcon_info *info = container_of(work,
struct arizona_extcon_info,
hpdet_work.work);
mutex_lock(&info->lock);
arizona_start_hpdet_acc_id(info);
mutex_unlock(&info->lock);
}
static irqreturn_t arizona_jackdet(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
unsigned int val, present, mask;
bool cancelled_hp, cancelled_mic;
int ret, i;
cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work);
cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work);
pm_runtime_get_sync(info->dev);
mutex_lock(&info->lock);
if (arizona->pdata.jd_gpio5) {
mask = ARIZONA_MICD_CLAMP_STS;
if (arizona->pdata.jd_invert)
present = ARIZONA_MICD_CLAMP_STS;
else
present = 0;
} else {
mask = ARIZONA_JD1_STS;
if (arizona->pdata.jd_invert)
present = 0;
else
present = ARIZONA_JD1_STS;
}
ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
ret);
mutex_unlock(&info->lock);
pm_runtime_put_autosuspend(info->dev);
return IRQ_NONE;
}
val &= mask;
if (val == info->last_jackdet) {
dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n");
if (cancelled_hp)
queue_delayed_work(system_power_efficient_wq,
&info->hpdet_work,
msecs_to_jiffies(HPDET_DEBOUNCE));
if (cancelled_mic) {
int micd_timeout = info->micd_timeout;
queue_delayed_work(system_power_efficient_wq,
&info->micd_timeout_work,
msecs_to_jiffies(micd_timeout));
}
goto out;
}
info->last_jackdet = val;
if (info->last_jackdet == present) {
dev_dbg(arizona->dev, "Detected jack\n");
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_MECHANICAL, true);
if (ret != 0)
dev_err(arizona->dev, "Mechanical report failed: %d\n",
ret);
if (!arizona->pdata.hpdet_acc_id) {
info->detecting = true;
info->mic = false;
info->jack_flips = 0;
arizona_start_mic(info);
} else {
queue_delayed_work(system_power_efficient_wq,
&info->hpdet_work,
msecs_to_jiffies(HPDET_DEBOUNCE));
}
regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0);
} else {
dev_dbg(arizona->dev, "Detected jack removal\n");
arizona_stop_mic(info);
info->num_hpdet_res = 0;
for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++)
info->hpdet_res[i] = 0;
info->mic = false;
info->hpdet_done = false;
info->hpdet_retried = false;
for (i = 0; i < info->num_micd_ranges; i++)
input_report_key(info->input,
info->micd_ranges[i].key, 0);
input_sync(info->input);
ret = extcon_update_state(info->edev, 0xffffffff, 0);
if (ret != 0)
dev_err(arizona->dev, "Removal report failed: %d\n",
ret);
regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
}
if (arizona->pdata.micd_timeout)
info->micd_timeout = arizona->pdata.micd_timeout;
else
info->micd_timeout = DEFAULT_MICD_TIMEOUT;
out:
/* Clear trig_sts to make sure DCVDD is not forced up */
regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
ARIZONA_JD1_FALL_TRIG_STS |
ARIZONA_JD1_RISE_TRIG_STS);
mutex_unlock(&info->lock);
pm_runtime_mark_last_busy(info->dev);
pm_runtime_put_autosuspend(info->dev);
return IRQ_HANDLED;
}
/* Map a level onto a slot in the register bank */
static void arizona_micd_set_level(struct arizona *arizona, int index,
unsigned int level)
{
int reg;
unsigned int mask;
reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2);
if (!(index % 2)) {
mask = 0x3f00;
level <<= 8;
} else {
mask = 0x3f;
}
/* Program the level itself */
regmap_update_bits(arizona->regmap, reg, mask, level);
}
static int arizona_extcon_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_extcon_info *info;
unsigned int val;
unsigned int clamp_mode;
int jack_irq_fall, jack_irq_rise;
int ret, mode, i, j;
if (!arizona->dapm || !arizona->dapm->card)
return -EPROBE_DEFER;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
if (IS_ERR(info->micvdd)) {
ret = PTR_ERR(info->micvdd);
dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
return ret;
}
mutex_init(&info->lock);
info->arizona = arizona;
info->dev = &pdev->dev;
info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS);
INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work);
INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect);
INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work);
platform_set_drvdata(pdev, info);
switch (arizona->type) {
case WM5102:
switch (arizona->rev) {
case 0:
info->micd_reva = true;
break;
default:
info->micd_clamp = true;
info->hpdet_ip = 1;
break;
}
break;
case WM5110:
switch (arizona->rev) {
case 0 ... 2:
break;
default:
info->micd_clamp = true;
info->hpdet_ip = 2;
break;
}
break;
default:
break;
}
info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable);
if (IS_ERR(info->edev)) {
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
info->edev->name = "Headset Jack";
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret < 0) {
dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
ret);
return ret;
}
info->input = devm_input_allocate_device(&pdev->dev);
if (!info->input) {
dev_err(arizona->dev, "Can't allocate input dev\n");
ret = -ENOMEM;
goto err_register;
}
info->input->name = "Headset";
info->input->phys = "arizona/extcon";
if (pdata->num_micd_configs) {
info->micd_modes = pdata->micd_configs;
info->micd_num_modes = pdata->num_micd_configs;
} else {
info->micd_modes = micd_default_modes;
info->micd_num_modes = ARRAY_SIZE(micd_default_modes);
}
if (arizona->pdata.micd_pol_gpio > 0) {
if (info->micd_modes[0].gpio)
mode = GPIOF_OUT_INIT_HIGH;
else
mode = GPIOF_OUT_INIT_LOW;
ret = devm_gpio_request_one(&pdev->dev,
arizona->pdata.micd_pol_gpio,
mode,
"MICD polarity");
if (ret != 0) {
dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
arizona->pdata.micd_pol_gpio, ret);
goto err_register;
}
}
if (arizona->pdata.hpdet_id_gpio > 0) {
ret = devm_gpio_request_one(&pdev->dev,
arizona->pdata.hpdet_id_gpio,
GPIOF_OUT_INIT_LOW,
"HPDET");
if (ret != 0) {
dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
arizona->pdata.hpdet_id_gpio, ret);
goto err_register;
}
}
if (arizona->pdata.micd_bias_start_time)
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_BIAS_STARTTIME_MASK,
arizona->pdata.micd_bias_start_time
<< ARIZONA_MICD_BIAS_STARTTIME_SHIFT);
if (arizona->pdata.micd_rate)
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_RATE_MASK,
arizona->pdata.micd_rate
<< ARIZONA_MICD_RATE_SHIFT);
if (arizona->pdata.micd_dbtime)
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_DBTIME_MASK,
arizona->pdata.micd_dbtime
<< ARIZONA_MICD_DBTIME_SHIFT);
BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) != 0x40);
if (arizona->pdata.num_micd_ranges) {
info->micd_ranges = pdata->micd_ranges;
info->num_micd_ranges = pdata->num_micd_ranges;
} else {
info->micd_ranges = micd_default_ranges;
info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges);
}
if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) {
dev_err(arizona->dev, "Too many MICD ranges: %d\n",
arizona->pdata.num_micd_ranges);
}
if (info->num_micd_ranges > 1) {
for (i = 1; i < info->num_micd_ranges; i++) {
if (info->micd_ranges[i - 1].max >
info->micd_ranges[i].max) {
dev_err(arizona->dev,
"MICD ranges must be sorted\n");
ret = -EINVAL;
goto err_input;
}
}
}
/* Disable all buttons by default */
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
ARIZONA_MICD_LVL_SEL_MASK, 0x81);
/* Set up all the buttons the user specified */
for (i = 0; i < info->num_micd_ranges; i++) {
for (j = 0; j < ARRAY_SIZE(arizona_micd_levels); j++)
if (arizona_micd_levels[j] >= info->micd_ranges[i].max)
break;
if (j == ARRAY_SIZE(arizona_micd_levels)) {
dev_err(arizona->dev, "Unsupported MICD level %d\n",
info->micd_ranges[i].max);
ret = -EINVAL;
goto err_input;
}
dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n",
arizona_micd_levels[j], i);
arizona_micd_set_level(arizona, i, j);
input_set_capability(info->input, EV_KEY,
info->micd_ranges[i].key);
/* Enable reporting of that range */
regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
1 << i, 1 << i);
}
/* Set all the remaining keys to a maximum */
for (; i < ARIZONA_MAX_MICD_RANGE; i++)
arizona_micd_set_level(arizona, i, 0x3f);
/*
* If we have a clamp use it, activating in conjunction with
* GPIO5 if that is connected for jack detect operation.
*/
if (info->micd_clamp) {
if (arizona->pdata.jd_gpio5) {
/* Put the GPIO into input mode with optional pull */
val = 0xc101;
if (arizona->pdata.jd_gpio5_nopull)
val &= ~ARIZONA_GPN_PU;
regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
val);
if (arizona->pdata.jd_invert)
clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H;
else
clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H;
} else {
if (arizona->pdata.jd_invert)
clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH;
else
clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL;
}
regmap_update_bits(arizona->regmap,
ARIZONA_MICD_CLAMP_CONTROL,
ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode);
regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_MICD_CLAMP_DB,
ARIZONA_MICD_CLAMP_DB);
}
arizona_extcon_set_mode(info, 0);
pm_runtime_enable(&pdev->dev);
pm_runtime_idle(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
if (arizona->pdata.jd_gpio5) {
jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
} else {
jack_irq_rise = ARIZONA_IRQ_JD_RISE;
jack_irq_fall = ARIZONA_IRQ_JD_FALL;
}
ret = arizona_request_irq(arizona, jack_irq_rise,
"JACKDET rise", arizona_jackdet, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
ret);
goto err_input;
}
ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n",
ret);
goto err_rise;
}
ret = arizona_request_irq(arizona, jack_irq_fall,
"JACKDET fall", arizona_jackdet, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret);
goto err_rise_wake;
}
ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n",
ret);
goto err_fall;
}
ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET,
"MICDET", arizona_micdet, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret);
goto err_fall_wake;
}
ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET,
"HPDET", arizona_hpdet_irq, info);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret);
goto err_micdet;
}
arizona_clk32k_enable(arizona);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_JD1_DB, ARIZONA_JD1_DB);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
ret = regulator_allow_bypass(info->micvdd, true);
if (ret != 0)
dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
ret);
pm_runtime_put(&pdev->dev);
ret = input_register_device(info->input);
if (ret) {
dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
goto err_hpdet;
}
return 0;
err_hpdet:
arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
err_micdet:
arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
err_fall_wake:
arizona_set_irq_wake(arizona, jack_irq_fall, 0);
err_fall:
arizona_free_irq(arizona, jack_irq_fall, info);
err_rise_wake:
arizona_set_irq_wake(arizona, jack_irq_rise, 0);
err_rise:
arizona_free_irq(arizona, jack_irq_rise, info);
err_input:
err_register:
pm_runtime_disable(&pdev->dev);
return ret;
}
static int arizona_extcon_remove(struct platform_device *pdev)
{
struct arizona_extcon_info *info = platform_get_drvdata(pdev);
struct arizona *arizona = info->arizona;
int jack_irq_rise, jack_irq_fall;
pm_runtime_disable(&pdev->dev);
regmap_update_bits(arizona->regmap,
ARIZONA_MICD_CLAMP_CONTROL,
ARIZONA_MICD_CLAMP_MODE_MASK, 0);
if (arizona->pdata.jd_gpio5) {
jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
} else {
jack_irq_rise = ARIZONA_IRQ_JD_RISE;
jack_irq_fall = ARIZONA_IRQ_JD_FALL;
}
arizona_set_irq_wake(arizona, jack_irq_rise, 0);
arizona_set_irq_wake(arizona, jack_irq_fall, 0);
arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
arizona_free_irq(arizona, jack_irq_rise, info);
arizona_free_irq(arizona, jack_irq_fall, info);
cancel_delayed_work_sync(&info->hpdet_work);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
ARIZONA_JD1_ENA, 0);
arizona_clk32k_disable(arizona);
return 0;
}
static struct platform_driver arizona_extcon_driver = {
.driver = {
.name = "arizona-extcon",
.owner = THIS_MODULE,
},
.probe = arizona_extcon_probe,
.remove = arizona_extcon_remove,
};
module_platform_driver(arizona_extcon_driver);
MODULE_DESCRIPTION("Arizona Extcon driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:extcon-arizona");
Reference in New Issue View Git Blame Copy Permalink