kernel-ark/drivers/clk/at91/clk-pll.c
Boris BREZILLON 87e2ed338f clk: at91: fix recalc_rate implementation of PLL driver
Use the cached values to calculate PLL rate instead of the register values.
This is required to prevent erroneous PLL rate return when the PLL rate
has been configured but the PLL is not prepared yet.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:37:17 -07:00

534 lines
13 KiB
C

/*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/at91_pmc.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include "pmc.h"
#define PLL_STATUS_MASK(id) (1 << (1 + (id)))
#define PLL_REG(id) (AT91_CKGR_PLLAR + ((id) * 4))
#define PLL_DIV_MASK 0xff
#define PLL_DIV_MAX PLL_DIV_MASK
#define PLL_DIV(reg) ((reg) & PLL_DIV_MASK)
#define PLL_MUL(reg, layout) (((reg) >> (layout)->mul_shift) & \
(layout)->mul_mask)
#define PLL_MUL_MIN 2
#define PLL_MUL_MASK(layout) ((layout)->mul_mask)
#define PLL_MUL_MAX(layout) (PLL_MUL_MASK(layout) + 1)
#define PLL_ICPR_SHIFT(id) ((id) * 16)
#define PLL_ICPR_MASK(id) (0xffff << PLL_ICPR_SHIFT(id))
#define PLL_MAX_COUNT 0x3f
#define PLL_COUNT_SHIFT 8
#define PLL_OUT_SHIFT 14
#define PLL_MAX_ID 1
struct clk_pll_characteristics {
struct clk_range input;
int num_output;
struct clk_range *output;
u16 *icpll;
u8 *out;
};
struct clk_pll_layout {
u32 pllr_mask;
u16 mul_mask;
u8 mul_shift;
};
#define to_clk_pll(hw) container_of(hw, struct clk_pll, hw)
struct clk_pll {
struct clk_hw hw;
struct at91_pmc *pmc;
unsigned int irq;
wait_queue_head_t wait;
u8 id;
u8 div;
u8 range;
u16 mul;
const struct clk_pll_layout *layout;
const struct clk_pll_characteristics *characteristics;
};
static irqreturn_t clk_pll_irq_handler(int irq, void *dev_id)
{
struct clk_pll *pll = (struct clk_pll *)dev_id;
wake_up(&pll->wait);
disable_irq_nosync(pll->irq);
return IRQ_HANDLED;
}
static int clk_pll_prepare(struct clk_hw *hw)
{
struct clk_pll *pll = to_clk_pll(hw);
struct at91_pmc *pmc = pll->pmc;
const struct clk_pll_layout *layout = pll->layout;
const struct clk_pll_characteristics *characteristics =
pll->characteristics;
u8 id = pll->id;
u32 mask = PLL_STATUS_MASK(id);
int offset = PLL_REG(id);
u8 out = 0;
u32 pllr, icpr;
u8 div;
u16 mul;
pllr = pmc_read(pmc, offset);
div = PLL_DIV(pllr);
mul = PLL_MUL(pllr, layout);
if ((pmc_read(pmc, AT91_PMC_SR) & mask) &&
(div == pll->div && mul == pll->mul))
return 0;
if (characteristics->out)
out = characteristics->out[pll->range];
if (characteristics->icpll) {
icpr = pmc_read(pmc, AT91_PMC_PLLICPR) & ~PLL_ICPR_MASK(id);
icpr |= (characteristics->icpll[pll->range] <<
PLL_ICPR_SHIFT(id));
pmc_write(pmc, AT91_PMC_PLLICPR, icpr);
}
pllr &= ~layout->pllr_mask;
pllr |= layout->pllr_mask &
(pll->div | (PLL_MAX_COUNT << PLL_COUNT_SHIFT) |
(out << PLL_OUT_SHIFT) |
((pll->mul & layout->mul_mask) << layout->mul_shift));
pmc_write(pmc, offset, pllr);
while (!(pmc_read(pmc, AT91_PMC_SR) & mask)) {
enable_irq(pll->irq);
wait_event(pll->wait,
pmc_read(pmc, AT91_PMC_SR) & mask);
}
return 0;
}
static int clk_pll_is_prepared(struct clk_hw *hw)
{
struct clk_pll *pll = to_clk_pll(hw);
struct at91_pmc *pmc = pll->pmc;
return !!(pmc_read(pmc, AT91_PMC_SR) &
PLL_STATUS_MASK(pll->id));
}
static void clk_pll_unprepare(struct clk_hw *hw)
{
struct clk_pll *pll = to_clk_pll(hw);
struct at91_pmc *pmc = pll->pmc;
const struct clk_pll_layout *layout = pll->layout;
int offset = PLL_REG(pll->id);
u32 tmp = pmc_read(pmc, offset) & ~(layout->pllr_mask);
pmc_write(pmc, offset, tmp);
}
static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
if (!pll->div || !pll->mul)
return 0;
return (parent_rate / pll->div) * (pll->mul + 1);
}
static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
unsigned long parent_rate,
u32 *div, u32 *mul,
u32 *index) {
const struct clk_pll_layout *layout = pll->layout;
const struct clk_pll_characteristics *characteristics =
pll->characteristics;
unsigned long bestremainder = ULONG_MAX;
unsigned long maxdiv, mindiv, tmpdiv;
long bestrate = -ERANGE;
unsigned long bestdiv;
unsigned long bestmul;
int i = 0;
/* Check if parent_rate is a valid input rate */
if (parent_rate < characteristics->input.min ||
parent_rate > characteristics->input.max)
return -ERANGE;
/*
* Calculate minimum divider based on the minimum multiplier, the
* parent_rate and the requested rate.
* Should always be 2 according to the input and output characteristics
* of the PLL blocks.
*/
mindiv = (parent_rate * PLL_MUL_MIN) / rate;
if (!mindiv)
mindiv = 1;
/*
* Calculate the maximum divider which is limited by PLL register
* layout (limited by the MUL or DIV field size).
*/
maxdiv = DIV_ROUND_UP(parent_rate * PLL_MUL_MAX(layout), rate);
if (maxdiv > PLL_DIV_MAX)
maxdiv = PLL_DIV_MAX;
/*
* Iterate over the acceptable divider values to find the best
* divider/multiplier pair (the one that generates the closest
* rate to the requested one).
*/
for (tmpdiv = mindiv; tmpdiv <= maxdiv; tmpdiv++) {
unsigned long remainder;
unsigned long tmprate;
unsigned long tmpmul;
/*
* Calculate the multiplier associated with the current
* divider that provide the closest rate to the requested one.
*/
tmpmul = DIV_ROUND_CLOSEST(rate, parent_rate / tmpdiv);
tmprate = (parent_rate / tmpdiv) * tmpmul;
if (tmprate > rate)
remainder = tmprate - rate;
else
remainder = rate - tmprate;
/*
* Compare the remainder with the best remainder found until
* now and elect a new best multiplier/divider pair if the
* current remainder is smaller than the best one.
*/
if (remainder < bestremainder) {
bestremainder = remainder;
bestdiv = tmpdiv;
bestmul = tmpmul;
bestrate = tmprate;
}
/*
* We've found a perfect match!
* Stop searching now and use this multiplier/divider pair.
*/
if (!remainder)
break;
}
/* We haven't found any multiplier/divider pair => return -ERANGE */
if (bestrate < 0)
return bestrate;
/* Check if bestrate is a valid output rate */
for (i = 0; i < characteristics->num_output; i++) {
if (bestrate >= characteristics->output[i].min &&
bestrate <= characteristics->output[i].max)
break;
}
if (i >= characteristics->num_output)
return -ERANGE;
if (div)
*div = bestdiv;
if (mul)
*mul = bestmul - 1;
if (index)
*index = i;
return bestrate;
}
static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
return clk_pll_get_best_div_mul(pll, rate, *parent_rate,
NULL, NULL, NULL);
}
static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pll *pll = to_clk_pll(hw);
long ret;
u32 div;
u32 mul;
u32 index;
ret = clk_pll_get_best_div_mul(pll, rate, parent_rate,
&div, &mul, &index);
if (ret < 0)
return ret;
pll->range = index;
pll->div = div;
pll->mul = mul;
return 0;
}
static const struct clk_ops pll_ops = {
.prepare = clk_pll_prepare,
.unprepare = clk_pll_unprepare,
.is_prepared = clk_pll_is_prepared,
.recalc_rate = clk_pll_recalc_rate,
.round_rate = clk_pll_round_rate,
.set_rate = clk_pll_set_rate,
};
static struct clk * __init
at91_clk_register_pll(struct at91_pmc *pmc, unsigned int irq, const char *name,
const char *parent_name, u8 id,
const struct clk_pll_layout *layout,
const struct clk_pll_characteristics *characteristics)
{
struct clk_pll *pll;
struct clk *clk = NULL;
struct clk_init_data init;
int ret;
int offset = PLL_REG(id);
u32 tmp;
if (id > PLL_MAX_ID)
return ERR_PTR(-EINVAL);
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return ERR_PTR(-ENOMEM);
init.name = name;
init.ops = &pll_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
init.flags = CLK_SET_RATE_GATE;
pll->id = id;
pll->hw.init = &init;
pll->layout = layout;
pll->characteristics = characteristics;
pll->pmc = pmc;
pll->irq = irq;
tmp = pmc_read(pmc, offset) & layout->pllr_mask;
pll->div = PLL_DIV(tmp);
pll->mul = PLL_MUL(tmp, layout);
init_waitqueue_head(&pll->wait);
irq_set_status_flags(pll->irq, IRQ_NOAUTOEN);
ret = request_irq(pll->irq, clk_pll_irq_handler, IRQF_TRIGGER_HIGH,
id ? "clk-pllb" : "clk-plla", pll);
if (ret)
return ERR_PTR(ret);
clk = clk_register(NULL, &pll->hw);
if (IS_ERR(clk))
kfree(pll);
return clk;
}
static const struct clk_pll_layout at91rm9200_pll_layout = {
.pllr_mask = 0x7FFFFFF,
.mul_shift = 16,
.mul_mask = 0x7FF,
};
static const struct clk_pll_layout at91sam9g45_pll_layout = {
.pllr_mask = 0xFFFFFF,
.mul_shift = 16,
.mul_mask = 0xFF,
};
static const struct clk_pll_layout at91sam9g20_pllb_layout = {
.pllr_mask = 0x3FFFFF,
.mul_shift = 16,
.mul_mask = 0x3F,
};
static const struct clk_pll_layout sama5d3_pll_layout = {
.pllr_mask = 0x1FFFFFF,
.mul_shift = 18,
.mul_mask = 0x7F,
};
static struct clk_pll_characteristics * __init
of_at91_clk_pll_get_characteristics(struct device_node *np)
{
int i;
int offset;
u32 tmp;
int num_output;
u32 num_cells;
struct clk_range input;
struct clk_range *output;
u8 *out = NULL;
u16 *icpll = NULL;
struct clk_pll_characteristics *characteristics;
if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
return NULL;
if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
&num_cells))
return NULL;
if (num_cells < 2 || num_cells > 4)
return NULL;
if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
return NULL;
num_output = tmp / (sizeof(u32) * num_cells);
characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
if (!characteristics)
return NULL;
output = kzalloc(sizeof(*output) * num_output, GFP_KERNEL);
if (!output)
goto out_free_characteristics;
if (num_cells > 2) {
out = kzalloc(sizeof(*out) * num_output, GFP_KERNEL);
if (!out)
goto out_free_output;
}
if (num_cells > 3) {
icpll = kzalloc(sizeof(*icpll) * num_output, GFP_KERNEL);
if (!icpll)
goto out_free_output;
}
for (i = 0; i < num_output; i++) {
offset = i * num_cells;
if (of_property_read_u32_index(np,
"atmel,pll-clk-output-ranges",
offset, &tmp))
goto out_free_output;
output[i].min = tmp;
if (of_property_read_u32_index(np,
"atmel,pll-clk-output-ranges",
offset + 1, &tmp))
goto out_free_output;
output[i].max = tmp;
if (num_cells == 2)
continue;
if (of_property_read_u32_index(np,
"atmel,pll-clk-output-ranges",
offset + 2, &tmp))
goto out_free_output;
out[i] = tmp;
if (num_cells == 3)
continue;
if (of_property_read_u32_index(np,
"atmel,pll-clk-output-ranges",
offset + 3, &tmp))
goto out_free_output;
icpll[i] = tmp;
}
characteristics->input = input;
characteristics->num_output = num_output;
characteristics->output = output;
characteristics->out = out;
characteristics->icpll = icpll;
return characteristics;
out_free_output:
kfree(icpll);
kfree(out);
kfree(output);
out_free_characteristics:
kfree(characteristics);
return NULL;
}
static void __init
of_at91_clk_pll_setup(struct device_node *np, struct at91_pmc *pmc,
const struct clk_pll_layout *layout)
{
u32 id;
unsigned int irq;
struct clk *clk;
const char *parent_name;
const char *name = np->name;
struct clk_pll_characteristics *characteristics;
if (of_property_read_u32(np, "reg", &id))
return;
parent_name = of_clk_get_parent_name(np, 0);
of_property_read_string(np, "clock-output-names", &name);
characteristics = of_at91_clk_pll_get_characteristics(np);
if (!characteristics)
return;
irq = irq_of_parse_and_map(np, 0);
if (!irq)
return;
clk = at91_clk_register_pll(pmc, irq, name, parent_name, id, layout,
characteristics);
if (IS_ERR(clk))
goto out_free_characteristics;
of_clk_add_provider(np, of_clk_src_simple_get, clk);
return;
out_free_characteristics:
kfree(characteristics);
}
void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
struct at91_pmc *pmc)
{
of_at91_clk_pll_setup(np, pmc, &at91rm9200_pll_layout);
}
void __init of_at91sam9g45_clk_pll_setup(struct device_node *np,
struct at91_pmc *pmc)
{
of_at91_clk_pll_setup(np, pmc, &at91sam9g45_pll_layout);
}
void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np,
struct at91_pmc *pmc)
{
of_at91_clk_pll_setup(np, pmc, &at91sam9g20_pllb_layout);
}
void __init of_sama5d3_clk_pll_setup(struct device_node *np,
struct at91_pmc *pmc)
{
of_at91_clk_pll_setup(np, pmc, &sama5d3_pll_layout);
}