kernel-ark/include/linux/extcon.h
Chanwoo Choi 11eecf910b extcon: Modify the id and name of external connector
This patch modifies the id and name of external connector with the
additional prefix to clarify both attribute and meaning of external
connector as following:
- EXTCON_CHG_* mean the charger connector.
- EXTCON_JACK_* mean the jack connector.
- EXTCON_DISP_* mean the display port connector.

Following table show the new name of external connector with old name:
--------------------------------------------------
Old extcon name         | New extcon name        |
--------------------------------------------------
EXTCON_TA               | EXTCON_CHG_USB_DCP     |
EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP     |
EXTCON_FAST_CHARGER     | EXTCON_CHG_USB_FAST    |
EXTCON_SLOW_CHARGER     | EXTCON_CHG_USB_SLOW    |
--------------------------------------------------
EXTCON_MICROPHONE       | EXTCON_JACK_MICROPHONE |
EXTCON_HEADPHONE        | EXTCON_JACK_HEADPHONE  |
EXTCON_LINE_IN          | EXTCON_JACK_LINE_IN    |
EXTCON_LINE_OUT         | EXTCON_JACK_LINE_OUT   |
EXTCON_VIDEO_IN         | EXTCON_JACK_VIDEO_IN   |
EXTCON_VIDEO_OUT        | EXTCON_JACK_VIDEO_OUT  |
EXTCON_SPDIF_IN         | EXTCON_JACK_SPDIF_IN   |
EXTCON_SPDIF_OUT        | EXTCON_JACK_SPDIF_OUT  |
--------------------------------------------------
EXTCON_HMDI             | EXTCON_DISP_HDMI       |
EXTCON_MHL              | EXTCON_DISP_MHL        |
EXTCON_DVI              | EXTCON_DISP_DVI        |
EXTCON_VGA              | EXTCON_DISP_VGA        |
--------------------------------------------------

And, when altering the name of USB charger connector, EXTCON refers to the
"Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard
name of USB charging port as following. Following name of USB charging port
are already used in power_supply subsystem. We chan check it on patch[2].
- EXTCON_CHG_USB_SDP	/* Standard Downstream Port */
- EXTCON_CHG_USB_DCP	/* Dedicated Charging Port */
- EXTCON_CHG_USB_CDP	/* Charging Downstream Port */
- EXTCON_CHG_USB_ACA	/* Accessory Charger Adapter */

[1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip
[2] commit 85efc8a18c ("power_supply: Add types for USB chargers")

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ckeepax: For the Arizona changes]
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-10-16 08:30:09 +09:00

361 lines
11 KiB
C

/*
* External connector (extcon) class driver
*
* Copyright (C) 2015 Samsung Electronics
* Author: Chanwoo Choi <cw00.choi@samsung.com>
*
* Copyright (C) 2012 Samsung Electronics
* Author: Donggeun Kim <dg77.kim@samsung.com>
* Author: MyungJoo Ham <myungjoo.ham@samsung.com>
*
* based on switch class driver
* Copyright (C) 2008 Google, Inc.
* Author: Mike Lockwood <lockwood@android.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __LINUX_EXTCON_H__
#define __LINUX_EXTCON_H__
#include <linux/device.h>
/*
* Define the unique id of supported external connectors
*/
#define EXTCON_NONE 0
/* USB external connector */
#define EXTCON_USB 1
#define EXTCON_USB_HOST 2
/* Charging external connector */
#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */
#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */
#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */
#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */
#define EXTCON_CHG_USB_FAST 9
#define EXTCON_CHG_USB_SLOW 10
/* Jack external connector */
#define EXTCON_JACK_MICROPHONE 20
#define EXTCON_JACK_HEADPHONE 21
#define EXTCON_JACK_LINE_IN 22
#define EXTCON_JACK_LINE_OUT 23
#define EXTCON_JACK_VIDEO_IN 24
#define EXTCON_JACK_VIDEO_OUT 25
#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */
#define EXTCON_JACK_SPDIF_OUT 27
/* Display external connector */
#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */
#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */
#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */
#define EXTCON_DISP_VGA 43 /* Video Graphics Array */
/* Miscellaneous external connector */
#define EXTCON_DOCK 60
#define EXTCON_JIG 61
#define EXTCON_MECHANICAL 62
#define EXTCON_NUM 63
struct extcon_cable;
/**
* struct extcon_dev - An extcon device represents one external connector.
* @name: The name of this extcon device. Parent device name is
* used if NULL.
* @supported_cable: Array of supported cable names ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
* @mutually_exclusive: Array of mutually exclusive set of cables that cannot
* be attached simultaneously. The array should be
* ending with NULL or be NULL (no mutually exclusive
* cables). For example, if it is { 0x7, 0x30, 0}, then,
* {0, 1}, {0, 1, 2}, {0, 2}, {1, 2}, or {4, 5} cannot
* be attached simulataneously. {0x7, 0} is equivalent to
* {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
* can be no simultaneous connections.
* @dev: Device of this extcon.
* @state: Attach/detach state of this extcon. Do not provide at
* register-time.
* @nh: Notifier for the state change events from this extcon
* @entry: To support list of extcon devices so that users can
* search for extcon devices based on the extcon name.
* @lock:
* @max_supported: Internal value to store the number of cables.
* @extcon_dev_type: Device_type struct to provide attribute_groups
* customized for each extcon device.
* @cables: Sysfs subdirectories. Each represents one cable.
*
* In most cases, users only need to provide "User initializing data" of
* this struct when registering an extcon. In some exceptional cases,
* optional callbacks may be needed. However, the values in "internal data"
* are overwritten by register function.
*/
struct extcon_dev {
/* Optional user initializing data */
const char *name;
const unsigned int *supported_cable;
const u32 *mutually_exclusive;
/* Internal data. Please do not set. */
struct device dev;
struct raw_notifier_head *nh;
struct list_head entry;
int max_supported;
spinlock_t lock; /* could be called by irq handler */
u32 state;
/* /sys/class/extcon/.../cable.n/... */
struct device_type extcon_dev_type;
struct extcon_cable *cables;
/* /sys/class/extcon/.../mutually_exclusive/... */
struct attribute_group attr_g_muex;
struct attribute **attrs_muex;
struct device_attribute *d_attrs_muex;
};
/**
* struct extcon_cable - An internal data for each cable of extcon device.
* @edev: The extcon device
* @cable_index: Index of this cable in the edev
* @attr_g: Attribute group for the cable
* @attr_name: "name" sysfs entry
* @attr_state: "state" sysfs entry
* @attrs: Array pointing to attr_name and attr_state for attr_g
*/
struct extcon_cable {
struct extcon_dev *edev;
int cable_index;
struct attribute_group attr_g;
struct device_attribute attr_name;
struct device_attribute attr_state;
struct attribute *attrs[3]; /* to be fed to attr_g.attrs */
};
/**
* struct extcon_specific_cable_nb - An internal data for
* extcon_register_interest().
* @user_nb: user provided notifier block for events from
* a specific cable.
* @cable_index: the target cable.
* @edev: the target extcon device.
* @previous_value: the saved previous event value.
*/
struct extcon_specific_cable_nb {
struct notifier_block *user_nb;
int cable_index;
struct extcon_dev *edev;
unsigned long previous_value;
};
#if IS_ENABLED(CONFIG_EXTCON)
/*
* Following APIs are for notifiers or configurations.
* Notifiers are the external port and connection devices.
*/
extern int extcon_dev_register(struct extcon_dev *edev);
extern void extcon_dev_unregister(struct extcon_dev *edev);
extern int devm_extcon_dev_register(struct device *dev,
struct extcon_dev *edev);
extern void devm_extcon_dev_unregister(struct device *dev,
struct extcon_dev *edev);
extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
/*
* Following APIs control the memory of extcon device.
*/
extern struct extcon_dev *extcon_dev_allocate(const unsigned int *cable);
extern void extcon_dev_free(struct extcon_dev *edev);
extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
const unsigned int *cable);
extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
/*
* get/set/update_state access the 32b encoded state value, which represents
* states of all possible cables of the multistate port. For example, if one
* calls extcon_set_state(edev, 0x7), it may mean that all the three cables
* are attached to the port.
*/
static inline u32 extcon_get_state(struct extcon_dev *edev)
{
return edev->state;
}
extern int extcon_set_state(struct extcon_dev *edev, u32 state);
extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
/*
* get/set_cable_state access each bit of the 32b encoded state value.
* They are used to access the status of each cable based on the cable_name.
*/
extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id);
extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
bool cable_state);
extern int extcon_get_cable_state(struct extcon_dev *edev,
const char *cable_name);
extern int extcon_set_cable_state(struct extcon_dev *edev,
const char *cable_name, bool cable_state);
/*
* Following APIs are for notifiees (those who want to be notified)
* to register a callback for events from a specific cable of the extcon.
* Notifiees are the connected device drivers wanting to get notified by
* a specific external port of a connection device.
*/
extern int extcon_register_interest(struct extcon_specific_cable_nb *obj,
const char *extcon_name,
const char *cable_name,
struct notifier_block *nb);
extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb);
/*
* Following APIs are to monitor every action of a notifier.
* Registrar gets notified for every external port of a connection device.
* Probably this could be used to debug an action of notifier; however,
* we do not recommend to use this for normal 'notifiee' device drivers who
* want to be notified by a specific external port of the notifier.
*/
extern int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
struct notifier_block *nb);
extern int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id,
struct notifier_block *nb);
/*
* Following API get the extcon device from devicetree.
* This function use phandle of devicetree to get extcon device directly.
*/
extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
int index);
/* Following API to get information of extcon device */
extern const char *extcon_get_edev_name(struct extcon_dev *edev);
#else /* CONFIG_EXTCON */
static inline int extcon_dev_register(struct extcon_dev *edev)
{
return 0;
}
static inline void extcon_dev_unregister(struct extcon_dev *edev) { }
static inline int devm_extcon_dev_register(struct device *dev,
struct extcon_dev *edev)
{
return -EINVAL;
}
static inline void devm_extcon_dev_unregister(struct device *dev,
struct extcon_dev *edev) { }
static inline struct extcon_dev *extcon_dev_allocate(const unsigned int *cable)
{
return ERR_PTR(-ENOSYS);
}
static inline void extcon_dev_free(struct extcon_dev *edev) { }
static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
const unsigned int *cable)
{
return ERR_PTR(-ENOSYS);
}
static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
static inline u32 extcon_get_state(struct extcon_dev *edev)
{
return 0;
}
static inline int extcon_set_state(struct extcon_dev *edev, u32 state)
{
return 0;
}
static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
u32 state)
{
return 0;
}
static inline int extcon_get_cable_state_(struct extcon_dev *edev,
unsigned int id)
{
return 0;
}
static inline int extcon_set_cable_state_(struct extcon_dev *edev,
unsigned int id, bool cable_state)
{
return 0;
}
static inline int extcon_get_cable_state(struct extcon_dev *edev,
const char *cable_name)
{
return 0;
}
static inline int extcon_set_cable_state(struct extcon_dev *edev,
const char *cable_name, int state)
{
return 0;
}
static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
{
return NULL;
}
static inline int extcon_register_notifier(struct extcon_dev *edev,
unsigned int id,
struct notifier_block *nb)
{
return 0;
}
static inline int extcon_unregister_notifier(struct extcon_dev *edev,
unsigned int id,
struct notifier_block *nb)
{
return 0;
}
static inline int extcon_register_interest(struct extcon_specific_cable_nb *obj,
const char *extcon_name,
const char *cable_name,
struct notifier_block *nb)
{
return 0;
}
static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
*obj)
{
return 0;
}
static inline struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
int index)
{
return ERR_PTR(-ENODEV);
}
#endif /* CONFIG_EXTCON */
#endif /* __LINUX_EXTCON_H__ */