7d361cb754
The irq_set_affinity handler for the mn10300 cpu pic had some hard-coded IRQs which were not to be migrated from one cpu to another. This patch cleans those up by using a combination of IRQF_NOBALANCING and specialized irq chips with no irq_set_affinity handler. This maintains the previous behavior by using generic IRQ interfaces rather than hard coding IRQ numbers in the default irq_set_affinity handler. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
356 lines
8.8 KiB
C
356 lines
8.8 KiB
C
/* MN10300 Arch-specific interrupt handling
|
|
*
|
|
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
|
|
* Written by David Howells (dhowells@redhat.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public Licence
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the Licence, or (at your option) any later version.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/cpumask.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/serial-regs.h>
|
|
|
|
unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = {
|
|
[0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7
|
|
};
|
|
EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
|
|
|
|
#ifdef CONFIG_SMP
|
|
static char irq_affinity_online[NR_IRQS] = {
|
|
[0 ... NR_IRQS - 1] = 0
|
|
};
|
|
|
|
#define NR_IRQ_WORDS ((NR_IRQS + 31) / 32)
|
|
static unsigned long irq_affinity_request[NR_IRQ_WORDS] = {
|
|
[0 ... NR_IRQ_WORDS - 1] = 0
|
|
};
|
|
#endif /* CONFIG_SMP */
|
|
|
|
atomic_t irq_err_count;
|
|
|
|
/*
|
|
* MN10300 interrupt controller operations
|
|
*/
|
|
static void mn10300_cpupic_ack(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
unsigned long flags;
|
|
u16 tmp;
|
|
|
|
flags = arch_local_cli_save();
|
|
GxICR_u8(irq) = GxICR_DETECT;
|
|
tmp = GxICR(irq);
|
|
arch_local_irq_restore(flags);
|
|
}
|
|
|
|
static void __mask_and_set_icr(unsigned int irq,
|
|
unsigned int mask, unsigned int set)
|
|
{
|
|
unsigned long flags;
|
|
u16 tmp;
|
|
|
|
flags = arch_local_cli_save();
|
|
tmp = GxICR(irq);
|
|
GxICR(irq) = (tmp & mask) | set;
|
|
tmp = GxICR(irq);
|
|
arch_local_irq_restore(flags);
|
|
}
|
|
|
|
static void mn10300_cpupic_mask(struct irq_data *d)
|
|
{
|
|
__mask_and_set_icr(d->irq, GxICR_LEVEL, 0);
|
|
}
|
|
|
|
static void mn10300_cpupic_mask_ack(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
#ifdef CONFIG_SMP
|
|
unsigned long flags;
|
|
u16 tmp;
|
|
|
|
flags = arch_local_cli_save();
|
|
|
|
if (!test_and_clear_bit(irq, irq_affinity_request)) {
|
|
tmp = GxICR(irq);
|
|
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
|
|
tmp = GxICR(irq);
|
|
} else {
|
|
u16 tmp2;
|
|
tmp = GxICR(irq);
|
|
GxICR(irq) = (tmp & GxICR_LEVEL);
|
|
tmp2 = GxICR(irq);
|
|
|
|
irq_affinity_online[irq] =
|
|
cpumask_any_and(d->affinity, cpu_online_mask);
|
|
CROSS_GxICR(irq, irq_affinity_online[irq]) =
|
|
(tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT;
|
|
tmp = CROSS_GxICR(irq, irq_affinity_online[irq]);
|
|
}
|
|
|
|
arch_local_irq_restore(flags);
|
|
#else /* CONFIG_SMP */
|
|
__mask_and_set_icr(irq, GxICR_LEVEL, GxICR_DETECT);
|
|
#endif /* CONFIG_SMP */
|
|
}
|
|
|
|
static void mn10300_cpupic_unmask(struct irq_data *d)
|
|
{
|
|
__mask_and_set_icr(d->irq, GxICR_LEVEL, GxICR_ENABLE);
|
|
}
|
|
|
|
static void mn10300_cpupic_unmask_clear(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
/* the MN10300 PIC latches its interrupt request bit, even after the
|
|
* device has ceased to assert its interrupt line and the interrupt
|
|
* channel has been disabled in the PIC, so for level-triggered
|
|
* interrupts we need to clear the request bit when we re-enable */
|
|
#ifdef CONFIG_SMP
|
|
unsigned long flags;
|
|
u16 tmp;
|
|
|
|
flags = arch_local_cli_save();
|
|
|
|
if (!test_and_clear_bit(irq, irq_affinity_request)) {
|
|
tmp = GxICR(irq);
|
|
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
|
|
tmp = GxICR(irq);
|
|
} else {
|
|
tmp = GxICR(irq);
|
|
|
|
irq_affinity_online[irq] = cpumask_any_and(d->affinity,
|
|
cpu_online_mask);
|
|
CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
|
|
tmp = CROSS_GxICR(irq, irq_affinity_online[irq]);
|
|
}
|
|
|
|
arch_local_irq_restore(flags);
|
|
#else /* CONFIG_SMP */
|
|
__mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE | GxICR_DETECT);
|
|
#endif /* CONFIG_SMP */
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int
|
|
mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask,
|
|
bool force)
|
|
{
|
|
unsigned long flags;
|
|
|
|
flags = arch_local_cli_save();
|
|
set_bit(d->irq, irq_affinity_request);
|
|
arch_local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SMP */
|
|
|
|
/*
|
|
* MN10300 PIC level-triggered IRQ handling.
|
|
*
|
|
* The PIC has no 'ACK' function per se. It is possible to clear individual
|
|
* channel latches, but each latch relatches whether or not the channel is
|
|
* masked, so we need to clear the latch when we unmask the channel.
|
|
*
|
|
* Also for this reason, we don't supply an ack() op (it's unused anyway if
|
|
* mask_ack() is provided), and mask_ack() just masks.
|
|
*/
|
|
static struct irq_chip mn10300_cpu_pic_level = {
|
|
.name = "cpu_l",
|
|
.irq_disable = mn10300_cpupic_mask,
|
|
.irq_enable = mn10300_cpupic_unmask_clear,
|
|
.irq_ack = NULL,
|
|
.irq_mask = mn10300_cpupic_mask,
|
|
.irq_mask_ack = mn10300_cpupic_mask,
|
|
.irq_unmask = mn10300_cpupic_unmask_clear,
|
|
#ifdef CONFIG_SMP
|
|
.irq_set_affinity = mn10300_cpupic_setaffinity,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* MN10300 PIC edge-triggered IRQ handling.
|
|
*
|
|
* We use the latch clearing function of the PIC as the 'ACK' function.
|
|
*/
|
|
static struct irq_chip mn10300_cpu_pic_edge = {
|
|
.name = "cpu_e",
|
|
.irq_disable = mn10300_cpupic_mask,
|
|
.irq_enable = mn10300_cpupic_unmask,
|
|
.irq_ack = mn10300_cpupic_ack,
|
|
.irq_mask = mn10300_cpupic_mask,
|
|
.irq_mask_ack = mn10300_cpupic_mask_ack,
|
|
.irq_unmask = mn10300_cpupic_unmask,
|
|
#ifdef CONFIG_SMP
|
|
.irq_set_affinity = mn10300_cpupic_setaffinity,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* 'what should we do if we get a hw irq event on an illegal vector'.
|
|
* each architecture has to answer this themselves.
|
|
*/
|
|
void ack_bad_irq(int irq)
|
|
{
|
|
printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
|
|
}
|
|
|
|
/*
|
|
* change the level at which an IRQ executes
|
|
* - must not be called whilst interrupts are being processed!
|
|
*/
|
|
void set_intr_level(int irq, u16 level)
|
|
{
|
|
BUG_ON(in_interrupt());
|
|
|
|
__mask_and_set_icr(irq, GxICR_ENABLE, level);
|
|
}
|
|
|
|
/*
|
|
* mark an interrupt to be ACK'd after interrupt handlers have been run rather
|
|
* than before
|
|
*/
|
|
void mn10300_set_lateack_irq_type(int irq)
|
|
{
|
|
irq_set_chip_and_handler(irq, &mn10300_cpu_pic_level,
|
|
handle_level_irq);
|
|
}
|
|
|
|
/*
|
|
* initialise the interrupt system
|
|
*/
|
|
void __init init_IRQ(void)
|
|
{
|
|
int irq;
|
|
|
|
for (irq = 0; irq < NR_IRQS; irq++)
|
|
if (irq_get_chip(irq) == &no_irq_chip)
|
|
/* due to the PIC latching interrupt requests, even
|
|
* when the IRQ is disabled, IRQ_PENDING is superfluous
|
|
* and we can use handle_level_irq() for edge-triggered
|
|
* interrupts */
|
|
irq_set_chip_and_handler(irq, &mn10300_cpu_pic_edge,
|
|
handle_level_irq);
|
|
|
|
unit_init_IRQ();
|
|
}
|
|
|
|
/*
|
|
* handle normal device IRQs
|
|
*/
|
|
asmlinkage void do_IRQ(void)
|
|
{
|
|
unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw;
|
|
unsigned int cpu_id = smp_processor_id();
|
|
int irq;
|
|
|
|
sp = current_stack_pointer();
|
|
BUG_ON(sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN);
|
|
|
|
/* make sure local_irq_enable() doesn't muck up the interrupt priority
|
|
* setting in EPSW */
|
|
old_irq_enabled_epsw = __mn10300_irq_enabled_epsw[cpu_id];
|
|
local_save_flags(epsw);
|
|
__mn10300_irq_enabled_epsw[cpu_id] = EPSW_IE | (EPSW_IM & epsw);
|
|
irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL;
|
|
|
|
#ifdef CONFIG_MN10300_WD_TIMER
|
|
__IRQ_STAT(cpu_id, __irq_count)++;
|
|
#endif
|
|
|
|
irq_enter();
|
|
|
|
for (;;) {
|
|
/* ask the interrupt controller for the next IRQ to process
|
|
* - the result we get depends on EPSW.IM
|
|
*/
|
|
irq = IAGR & IAGR_GN;
|
|
if (!irq)
|
|
break;
|
|
|
|
local_irq_restore(irq_disabled_epsw);
|
|
|
|
generic_handle_irq(irq >> 2);
|
|
|
|
/* restore IRQ controls for IAGR access */
|
|
local_irq_restore(epsw);
|
|
}
|
|
|
|
__mn10300_irq_enabled_epsw[cpu_id] = old_irq_enabled_epsw;
|
|
|
|
irq_exit();
|
|
}
|
|
|
|
/*
|
|
* Display interrupt management information through /proc/interrupts
|
|
*/
|
|
int arch_show_interrupts(struct seq_file *p, int prec)
|
|
{
|
|
#ifdef CONFIG_MN10300_WD_TIMER
|
|
int j;
|
|
|
|
seq_printf(p, "%*s: ", prec, "NMI");
|
|
for (j = 0; j < NR_CPUS; j++)
|
|
if (cpu_online(j))
|
|
seq_printf(p, "%10u ", nmi_count(j));
|
|
seq_putc(p, '\n');
|
|
#endif
|
|
|
|
seq_printf(p, "%*s: ", prec, "ERR");
|
|
seq_printf(p, "%10u\n", atomic_read(&irq_err_count));
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
void migrate_irqs(void)
|
|
{
|
|
int irq;
|
|
unsigned int self, new;
|
|
unsigned long flags;
|
|
|
|
self = smp_processor_id();
|
|
for (irq = 0; irq < NR_IRQS; irq++) {
|
|
struct irq_data *data = irq_get_irq_data(irq);
|
|
|
|
if (irqd_is_per_cpu(data))
|
|
continue;
|
|
|
|
if (cpumask_test_cpu(self, &data->affinity) &&
|
|
!cpumask_intersects(&irq_affinity[irq], cpu_online_mask)) {
|
|
int cpu_id;
|
|
cpu_id = cpumask_first(cpu_online_mask);
|
|
cpumask_set_cpu(cpu_id, &data->affinity);
|
|
}
|
|
/* We need to operate irq_affinity_online atomically. */
|
|
arch_local_cli_save(flags);
|
|
if (irq_affinity_online[irq] == self) {
|
|
u16 x, tmp;
|
|
|
|
x = GxICR(irq);
|
|
GxICR(irq) = x & GxICR_LEVEL;
|
|
tmp = GxICR(irq);
|
|
|
|
new = cpumask_any_and(&data->affinity,
|
|
cpu_online_mask);
|
|
irq_affinity_online[irq] = new;
|
|
|
|
CROSS_GxICR(irq, new) =
|
|
(x & GxICR_LEVEL) | GxICR_DETECT;
|
|
tmp = CROSS_GxICR(irq, new);
|
|
|
|
x &= GxICR_LEVEL | GxICR_ENABLE;
|
|
if (GxICR(irq) & GxICR_REQUEST)
|
|
x |= GxICR_REQUEST | GxICR_DETECT;
|
|
CROSS_GxICR(irq, new) = x;
|
|
tmp = CROSS_GxICR(irq, new);
|
|
}
|
|
arch_local_irq_restore(flags);
|
|
}
|
|
}
|
|
#endif /* CONFIG_HOTPLUG_CPU */
|