kernel-ark/drivers/input/mouse/pxa930_trkball.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

271 lines
6.5 KiB
C

/*
* PXA930 track ball mouse driver
*
* Copyright (C) 2007 Marvell International Ltd.
* 2008-02-28: Yong Yao <yaoyong@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/input.h>
#include <linux/version.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/pxa930_trkball.h>
/* Trackball Controller Register Definitions */
#define TBCR (0x000C)
#define TBCNTR (0x0010)
#define TBSBC (0x0014)
#define TBCR_TBRST (1 << 1)
#define TBCR_TBSB (1 << 10)
#define TBCR_Y_FLT(n) (((n) & 0xf) << 6)
#define TBCR_X_FLT(n) (((n) & 0xf) << 2)
#define TBCNTR_YM(n) (((n) >> 24) & 0xff)
#define TBCNTR_YP(n) (((n) >> 16) & 0xff)
#define TBCNTR_XM(n) (((n) >> 8) & 0xff)
#define TBCNTR_XP(n) ((n) & 0xff)
#define TBSBC_TBSBC (0x1)
struct pxa930_trkball {
struct pxa930_trkball_platform_data *pdata;
/* Memory Mapped Register */
struct resource *mem;
void __iomem *mmio_base;
struct input_dev *input;
};
static irqreturn_t pxa930_trkball_interrupt(int irq, void *dev_id)
{
struct pxa930_trkball *trkball = dev_id;
struct input_dev *input = trkball->input;
int tbcntr, x, y;
/* According to the spec software must read TBCNTR twice:
* if the read value is the same, the reading is valid
*/
tbcntr = __raw_readl(trkball->mmio_base + TBCNTR);
if (tbcntr == __raw_readl(trkball->mmio_base + TBCNTR)) {
x = (TBCNTR_XP(tbcntr) - TBCNTR_XM(tbcntr)) / 2;
y = (TBCNTR_YP(tbcntr) - TBCNTR_YM(tbcntr)) / 2;
input_report_rel(input, REL_X, x);
input_report_rel(input, REL_Y, y);
input_sync(input);
}
__raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC);
__raw_writel(0, trkball->mmio_base + TBSBC);
return IRQ_HANDLED;
}
/* For TBCR, we need to wait for a while to make sure it has been modified. */
static int write_tbcr(struct pxa930_trkball *trkball, int v)
{
int i = 100;
__raw_writel(v, trkball->mmio_base + TBCR);
while (--i) {
if (__raw_readl(trkball->mmio_base + TBCR) == v)
break;
msleep(1);
}
if (i == 0) {
pr_err("%s: timed out writing TBCR(%x)!\n", __func__, v);
return -ETIMEDOUT;
}
return 0;
}
static void pxa930_trkball_config(struct pxa930_trkball *trkball)
{
uint32_t tbcr;
/* According to spec, need to write the filters of x,y to 0xf first! */
tbcr = __raw_readl(trkball->mmio_base + TBCR);
write_tbcr(trkball, tbcr | TBCR_X_FLT(0xf) | TBCR_Y_FLT(0xf));
write_tbcr(trkball, TBCR_X_FLT(trkball->pdata->x_filter) |
TBCR_Y_FLT(trkball->pdata->y_filter));
/* According to spec, set TBCR_TBRST first, before clearing it! */
tbcr = __raw_readl(trkball->mmio_base + TBCR);
write_tbcr(trkball, tbcr | TBCR_TBRST);
write_tbcr(trkball, tbcr & ~TBCR_TBRST);
__raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC);
__raw_writel(0, trkball->mmio_base + TBSBC);
pr_debug("%s: final TBCR=%x!\n", __func__,
__raw_readl(trkball->mmio_base + TBCR));
}
static int pxa930_trkball_open(struct input_dev *dev)
{
struct pxa930_trkball *trkball = input_get_drvdata(dev);
pxa930_trkball_config(trkball);
return 0;
}
static void pxa930_trkball_disable(struct pxa930_trkball *trkball)
{
uint32_t tbcr = __raw_readl(trkball->mmio_base + TBCR);
/* Held in reset, gate the 32-KHz input clock off */
write_tbcr(trkball, tbcr | TBCR_TBRST);
}
static void pxa930_trkball_close(struct input_dev *dev)
{
struct pxa930_trkball *trkball = input_get_drvdata(dev);
pxa930_trkball_disable(trkball);
}
static int __devinit pxa930_trkball_probe(struct platform_device *pdev)
{
struct pxa930_trkball *trkball;
struct input_dev *input;
struct resource *res;
int irq, error;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get trkball irq\n");
return -ENXIO;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get register memory\n");
return -ENXIO;
}
trkball = kzalloc(sizeof(struct pxa930_trkball), GFP_KERNEL);
if (!trkball)
return -ENOMEM;
trkball->pdata = pdev->dev.platform_data;
if (!trkball->pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
error = -EINVAL;
goto failed;
}
trkball->mmio_base = ioremap_nocache(res->start, resource_size(res));
if (!trkball->mmio_base) {
dev_err(&pdev->dev, "failed to ioremap registers\n");
error = -ENXIO;
goto failed;
}
/* held the module in reset, will be enabled in open() */
pxa930_trkball_disable(trkball);
error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED,
pdev->name, trkball);
if (error) {
dev_err(&pdev->dev, "failed to request irq: %d\n", error);
goto failed_free_io;
}
platform_set_drvdata(pdev, trkball);
input = input_allocate_device();
if (!input) {
dev_err(&pdev->dev, "failed to allocate input device\n");
error = -ENOMEM;
goto failed_free_irq;
}
input->name = pdev->name;
input->id.bustype = BUS_HOST;
input->open = pxa930_trkball_open;
input->close = pxa930_trkball_close;
input->dev.parent = &pdev->dev;
input_set_drvdata(input, trkball);
trkball->input = input;
input_set_capability(input, EV_REL, REL_X);
input_set_capability(input, EV_REL, REL_Y);
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "unable to register input device\n");
goto failed_free_input;
}
return 0;
failed_free_input:
input_free_device(input);
failed_free_irq:
free_irq(irq, trkball);
failed_free_io:
iounmap(trkball->mmio_base);
failed:
kfree(trkball);
return error;
}
static int __devexit pxa930_trkball_remove(struct platform_device *pdev)
{
struct pxa930_trkball *trkball = platform_get_drvdata(pdev);
int irq = platform_get_irq(pdev, 0);
input_unregister_device(trkball->input);
free_irq(irq, trkball);
iounmap(trkball->mmio_base);
kfree(trkball);
return 0;
}
static struct platform_driver pxa930_trkball_driver = {
.driver = {
.name = "pxa930-trkball",
},
.probe = pxa930_trkball_probe,
.remove = __devexit_p(pxa930_trkball_remove),
};
static int __init pxa930_trkball_init(void)
{
return platform_driver_register(&pxa930_trkball_driver);
}
static void __exit pxa930_trkball_exit(void)
{
platform_driver_unregister(&pxa930_trkball_driver);
}
module_init(pxa930_trkball_init);
module_exit(pxa930_trkball_exit);
MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>");
MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver");
MODULE_LICENSE("GPL");