4a043d79dc
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel@pengutronix.de Patchwork: https://patchwork.linux-mips.org/patch/3565/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
102 lines
4.2 KiB
C
102 lines
4.2 KiB
C
/*
|
|
* Locations of devices in the Cronus ASIC
|
|
*
|
|
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
* Author: Ken Eppinett
|
|
* David Schleef <ds@schleef.org>
|
|
*
|
|
* Description: Defines the platform resources for the SA settop.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <asm/mach-powertv/asic.h>
|
|
|
|
#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
|
|
|
|
const struct register_map cronus_register_map __initconst = {
|
|
.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
|
|
.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
|
|
.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
|
|
|
|
.chipver3 = {.phys = CRONUS_ADDR(0x2A0800)},
|
|
.chipver2 = {.phys = CRONUS_ADDR(0x2A0804)},
|
|
.chipver1 = {.phys = CRONUS_ADDR(0x2A0808)},
|
|
.chipver0 = {.phys = CRONUS_ADDR(0x2A080C)},
|
|
|
|
/* The registers of IRBlaster */
|
|
.uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)},
|
|
.uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)},
|
|
.uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)},
|
|
.uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)},
|
|
.uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)},
|
|
.uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)},
|
|
.uart1_data = {.phys = CRONUS_ADDR(0x2A1818)},
|
|
.uart1_status = {.phys = CRONUS_ADDR(0x2A181C)},
|
|
|
|
.int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)},
|
|
.int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)},
|
|
.int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)},
|
|
.int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)},
|
|
.int_config = {.phys = CRONUS_ADDR(0x2A2810)},
|
|
.int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)},
|
|
.ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)},
|
|
.ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)},
|
|
.ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)},
|
|
.ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)},
|
|
.int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)},
|
|
.int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)},
|
|
.int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)},
|
|
.int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)},
|
|
.int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)},
|
|
.int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)},
|
|
.int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)},
|
|
.int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)},
|
|
.int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)},
|
|
.int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)},
|
|
.int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)},
|
|
.int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)},
|
|
.int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)},
|
|
.int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)},
|
|
.int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)},
|
|
.int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)},
|
|
.int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
|
|
|
|
.mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
|
|
.fs432x4b4_usb_ctl = {.phys = CRONUS_ADDR(0x1C0028)},
|
|
.test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
|
|
.crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
|
|
.usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
|
|
.usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
|
|
.ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
|
|
.ohci_hc_revision = {.phys = CRONUS_ADDR(0x21fc00)},
|
|
.bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
|
|
.usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
|
|
.usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
|
|
.usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)},
|
|
.usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)},
|
|
|
|
.pcie_regs = {.phys = CRONUS_ADDR(0x220000)},
|
|
.tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)},
|
|
.tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)},
|
|
.gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)},
|
|
.gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)},
|
|
.gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)},
|
|
.watchdog = {.phys = CRONUS_ADDR(0x2A2C30)},
|
|
.front_panel = {.phys = CRONUS_ADDR(0x2A3800)},
|
|
};
|