kernel-ark/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
Matthias Schwarzott e4671b6bc0 V4L/DVB (7861): mt312: Prefix functions only with mt312_, Add zl10313 to kconfig description
This patch does some small cleanup to mt312.
It changes kconfig description to also list the ZL10313.

It does change some strange symbol names to be consistent with
module name mt312 and naming of all other functions in there.
* vp310_mt312_ops -> mt312_ops
* vp310_mt312_attach -> mt312_attach

Adds a MODULE_AUTHOR for me

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14 02:54:12 -03:00

682 lines
17 KiB
C

/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
*
* see flexcop.c for copyright information.
*/
#include <media/tuner.h>
#include "flexcop.h"
#include "stv0299.h"
#include "mt352.h"
#include "nxt200x.h"
#include "bcm3510.h"
#include "stv0297.h"
#include "mt312.h"
#include "lgdt330x.h"
#include "dvb-pll.h"
#include "tuner-simple.h"
#include "s5h1420.h"
#include "itd1000.h"
#include "cx24123.h"
#include "cx24113.h"
#include "isl6421.h"
/* lnb control */
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct flexcop_device *fc = fe->dvb->priv;
flexcop_ibi_value v;
deb_tuner("polarity/voltage = %u\n", voltage);
v = fc->read_ibi_reg(fc, misc_204);
switch (voltage) {
case SEC_VOLTAGE_OFF:
v.misc_204.ACPI1_sig = 1;
break;
case SEC_VOLTAGE_13:
v.misc_204.ACPI1_sig = 0;
v.misc_204.LNB_L_H_sig = 0;
break;
case SEC_VOLTAGE_18:
v.misc_204.ACPI1_sig = 0;
v.misc_204.LNB_L_H_sig = 1;
break;
default:
err("unknown SEC_VOLTAGE value");
return -EINVAL;
}
return fc->write_ibi_reg(fc, misc_204, v);
}
static int flexcop_sleep(struct dvb_frontend* fe)
{
struct flexcop_device *fc = fe->dvb->priv;
/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
if (fc->fe_sleep)
return fc->fe_sleep(fe);
/* v.misc_204.ACPI3_sig = 1;
fc->write_ibi_reg(fc,misc_204,v);*/
return 0;
}
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
{
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
struct flexcop_device *fc = fe->dvb->priv;
flexcop_ibi_value v;
u16 ax;
v.raw = 0;
deb_tuner("tone = %u\n",tone);
switch (tone) {
case SEC_TONE_ON:
ax = 0x01ff;
break;
case SEC_TONE_OFF:
ax = 0;
break;
default:
err("unknown SEC_TONE value");
return -EINVAL;
}
v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
}
static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
{
flexcop_set_tone(fe, SEC_TONE_ON);
udelay(data ? 500 : 1000);
flexcop_set_tone(fe, SEC_TONE_OFF);
udelay(data ? 1000 : 500);
}
static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
{
int i, par = 1, d;
for (i = 7; i >= 0; i--) {
d = (data >> i) & 1;
par ^= d;
flexcop_diseqc_send_bit(fe, d);
}
flexcop_diseqc_send_bit(fe, par);
}
static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
{
int i;
flexcop_set_tone(fe, SEC_TONE_OFF);
mdelay(16);
for (i = 0; i < len; i++)
flexcop_diseqc_send_byte(fe,msg[i]);
mdelay(16);
if (burst != -1) {
if (burst)
flexcop_diseqc_send_byte(fe, 0xff);
else {
flexcop_set_tone(fe, SEC_TONE_ON);
udelay(12500);
flexcop_set_tone(fe, SEC_TONE_OFF);
}
msleep(20);
}
return 0;
}
static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
{
return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
}
static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
{
return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
}
/* dvb-s stv0299 */
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
{
u8 aclk = 0;
u8 bclk = 0;
if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
stv0299_writereg (fe, 0x13, aclk);
stv0299_writereg (fe, 0x14, bclk);
stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
return 0;
}
static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
struct flexcop_device *fc = fe->dvb->priv;
div = params->frequency / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
buf[2] = 0x84; /* 0xC4 */
buf[3] = 0x08;
if (params->frequency < 1500000)
buf[3] |= 0x10;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
static u8 samsung_tbmu24112_inittab[] = {
0x01, 0x15,
0x02, 0x30,
0x03, 0x00,
0x04, 0x7D,
0x05, 0x35,
0x06, 0x02,
0x07, 0x00,
0x08, 0xC3,
0x0C, 0x00,
0x0D, 0x81,
0x0E, 0x23,
0x0F, 0x12,
0x10, 0x7E,
0x11, 0x84,
0x12, 0xB9,
0x13, 0x88,
0x14, 0x89,
0x15, 0xC9,
0x16, 0x00,
0x17, 0x5C,
0x18, 0x00,
0x19, 0x00,
0x1A, 0x00,
0x1C, 0x00,
0x1D, 0x00,
0x1E, 0x00,
0x1F, 0x3A,
0x20, 0x2E,
0x21, 0x80,
0x22, 0xFF,
0x23, 0xC1,
0x28, 0x00,
0x29, 0x1E,
0x2A, 0x14,
0x2B, 0x0F,
0x2C, 0x09,
0x2D, 0x05,
0x31, 0x1F,
0x32, 0x19,
0x33, 0xFE,
0x34, 0x93,
0xff, 0xff,
};
static struct stv0299_config samsung_tbmu24112_config = {
.demod_address = 0x68,
.inittab = samsung_tbmu24112_inittab,
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
.lock_output = STV0299_LOCKOUTPUT_LK,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
};
/* dvb-t mt352 */
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
static u8 mt352_reset [] = { 0x50, 0x80 };
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
udelay(2000);
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
return 0;
}
static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
{
u32 div;
unsigned char bs = 0;
if (buf_len < 5)
return -EINVAL;
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
pllbuf[0] = 0x61;
pllbuf[1] = div >> 8;
pllbuf[2] = div & 0xff;
pllbuf[3] = 0xcc;
pllbuf[4] = bs;
return 5;
}
static struct mt352_config samsung_tdtc9251dh0_config = {
.demod_address = 0x0f,
.demod_init = samsung_tdtc9251dh0_demod_init,
};
static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
{
struct flexcop_device *fc = fe->dvb->priv;
return request_firmware(fw, name, fc->dev);
}
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
.demod_address = 0x59,
.demod_chip = LGDT3303,
.serial_mpeg = 0x04,
.clock_polarity_flip = 1,
};
static struct nxt200x_config samsung_tbmv_config = {
.demod_address = 0x0a,
};
static struct bcm3510_config air2pc_atsc_first_gen_config = {
.demod_address = 0x0f,
.request_firmware = flexcop_fe_request_firmware,
};
static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
{
u8 buf[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
struct flexcop_device *fc = fe->dvb->priv;
div = (params->frequency + (125/2)) / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = (div >> 0) & 0xff;
buf[2] = 0x84 | ((div >> 10) & 0x60);
buf[3] = 0x80;
if (params->frequency < 1550000)
buf[3] |= 0x02;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
static struct mt312_config skystar23_samsung_tbdu18132_config = {
.demod_address = 0x0e,
};
static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct flexcop_device *fc = fe->dvb->priv;
u8 buf[4];
u16 div;
int ret;
/* 62.5 kHz * 10 */
#define REF_FREQ 625
#define FREQ_OFFSET 36125
div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz
buf[0] = (u8)( div >> 8) & 0x7f;
buf[1] = (u8) div & 0xff;
/* F(osc) = N * Reference Freq. (62.5 kHz)
* byte 2 : 0 N14 N13 N12 N11 N10 N9 N8
* byte 3 : N7 N6 N5 N4 N3 N2 N1 N0
* byte 4 : 1 * * AGD R3 R2 R1 R0
* byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
* AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
buf[2] = 0x95;
// Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
// 47 - 153 0 * 0 0 0 0 0 1 0x01
// 153 - 430 0 * 0 0 0 0 1 0 0x02
// 430 - 822 0 * 0 0 1 0 0 0 0x08
// 822 - 862 1 * 0 0 1 0 0 0 0x88
if (fep->frequency <= 153000000) buf[3] = 0x01;
else if (fep->frequency <= 430000000) buf[3] = 0x02;
else if (fep->frequency <= 822000000) buf[3] = 0x08;
else buf[3] = 0x88;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
ret = fc->i2c_request(&fc->fc_i2c_adap[2],
FC_WRITE, 0x61, buf[0], &buf[1], 3);
deb_tuner("tuner write returned: %d\n",ret);
return ret;
}
static u8 alps_tdee4_stv0297_inittab[] = {
0x80, 0x01,
0x80, 0x00,
0x81, 0x01,
0x81, 0x00,
0x00, 0x48,
0x01, 0x58,
0x03, 0x00,
0x04, 0x00,
0x07, 0x00,
0x08, 0x00,
0x30, 0xff,
0x31, 0x9d,
0x32, 0xff,
0x33, 0x00,
0x34, 0x29,
0x35, 0x55,
0x36, 0x80,
0x37, 0x6e,
0x38, 0x9c,
0x40, 0x1a,
0x41, 0xfe,
0x42, 0x33,
0x43, 0x00,
0x44, 0xff,
0x45, 0x00,
0x46, 0x00,
0x49, 0x04,
0x4a, 0x51,
0x4b, 0xf8,
0x52, 0x30,
0x53, 0x06,
0x59, 0x06,
0x5a, 0x5e,
0x5b, 0x04,
0x61, 0x49,
0x62, 0x0a,
0x70, 0xff,
0x71, 0x04,
0x72, 0x00,
0x73, 0x00,
0x74, 0x0c,
0x80, 0x20,
0x81, 0x00,
0x82, 0x30,
0x83, 0x00,
0x84, 0x04,
0x85, 0x22,
0x86, 0x08,
0x87, 0x1b,
0x88, 0x00,
0x89, 0x00,
0x90, 0x00,
0x91, 0x04,
0xa0, 0x86,
0xa1, 0x00,
0xa2, 0x00,
0xb0, 0x91,
0xb1, 0x0b,
0xc0, 0x5b,
0xc1, 0x10,
0xc2, 0x12,
0xd0, 0x02,
0xd1, 0x00,
0xd2, 0x00,
0xd3, 0x00,
0xd4, 0x02,
0xd5, 0x00,
0xde, 0x00,
0xdf, 0x01,
0xff, 0xff,
};
static struct stv0297_config alps_tdee4_stv0297_config = {
.demod_address = 0x1c,
.inittab = alps_tdee4_stv0297_inittab,
// .invert = 1,
// .pll_set = alps_tdee4_stv0297_pll_set,
};
/* SkyStar2 rev2.7 (a/u) */
static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
.demod_address = 0x53,
.invert = 1,
.repeated_start_workaround = 1,
};
static struct itd1000_config skystar2_rev2_7_itd1000_config = {
.i2c_address = 0x61,
};
/* SkyStar2 rev2.8 */
static struct cx24123_config skystar2_rev2_8_cx24123_config = {
.demod_address = 0x55,
.dont_use_pll = 1,
.agc_callback = cx24113_agc_callback,
};
static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
.i2c_addr = 0x54,
.xtal_khz = 10111,
};
/* try to figure out the frontend, each card/box can have on of the following list */
int flexcop_frontend_init(struct flexcop_device *fc)
{
struct dvb_frontend_ops *ops;
struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
struct i2c_adapter *i2c_tuner;
/* enable no_base_addr - no repeated start when reading */
fc->fc_i2c_adap[0].no_base_addr = 1;
fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c);
if (fc->fe != NULL) {
flexcop_ibi_value r108;
i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
ops = &fc->fe->ops;
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
fc->dev_type = FC_SKY_REV27;
/* enable no_base_addr - no repeated start when reading */
fc->fc_i2c_adap[2].no_base_addr = 1;
if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
err("ISL6421 could NOT be attached");
else
info("ISL6421 successfully attached");
/* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */
r108.raw = 0x00000506;
fc->write_ibi_reg(fc, tw_sm_c_108, r108);
if (i2c_tuner) {
if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL)
err("ITD1000 could NOT be attached");
else
info("ITD1000 successfully attached");
}
goto fe_found;
}
fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */
/* try the sky v2.8 (cx24123, isl6421) */
fc->fe = dvb_attach(cx24123_attach,
&skystar2_rev2_8_cx24123_config, i2c);
if (fc->fe != NULL) {
i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
if (i2c_tuner != NULL) {
if (dvb_attach(cx24113_attach, fc->fe,
&skystar2_rev2_8_cx24113_config,
i2c_tuner) == NULL)
err("CX24113 could NOT be attached");
else
info("CX24113 successfully attached");
}
fc->dev_type = FC_SKY_REV28;
fc->fc_i2c_adap[2].no_base_addr = 1;
if (dvb_attach(isl6421_attach, fc->fe,
&fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
err("ISL6421 could NOT be attached");
else
info("ISL6421 successfully attached");
/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
* IR-receiver (PIC16F818) - but the card has no input for
* that ??? */
goto fe_found;
}
/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
if (fc->fe != NULL) {
ops = &fc->fe->ops;
ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
ops->set_voltage = flexcop_set_voltage;
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
fc->dev_type = FC_SKY;
goto fe_found;
}
/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_AIR_DVB;
fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
goto fe_found;
}
/* try the air atsc 2nd generation (nxt2002) */
fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_AIR_ATSC2;
dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV);
goto fe_found;
}
fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_AIR_ATSC3;
dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
TUNER_LG_TDVS_H06XF);
goto fe_found;
}
/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_AIR_ATSC1;
goto fe_found;
}
/* try the cable dvb (stv0297) */
fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_CABLE;
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
goto fe_found;
}
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
fc->fe = dvb_attach(mt312_attach,
&skystar23_samsung_tbdu18132_config, i2c);
if (fc->fe != NULL) {
ops = &fc->fe->ops;
ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
ops->diseqc_send_burst = flexcop_diseqc_send_burst;
ops->set_tone = flexcop_set_tone;
ops->set_voltage = flexcop_set_voltage;
fc->fe_sleep = ops->sleep;
ops->sleep = flexcop_sleep;
fc->dev_type = FC_SKY_OLD;
goto fe_found;
}
err("no frontend driver found for this B2C2/FlexCop adapter");
return -ENODEV;
fe_found:
info("found '%s' .", fc->fe->ops.info.name);
if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
err("frontend registration failed!");
ops = &fc->fe->ops;
if (ops->release != NULL)
ops->release(fc->fe);
fc->fe = NULL;
return -EINVAL;
}
fc->init_state |= FC_STATE_FE_INIT;
return 0;
}
void flexcop_frontend_exit(struct flexcop_device *fc)
{
if (fc->init_state & FC_STATE_FE_INIT) {
dvb_unregister_frontend(fc->fe);
dvb_frontend_detach(fc->fe);
}
fc->init_state &= ~FC_STATE_FE_INIT;
}