davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
51a505d73b
kernel-ark/arch/powerpc/boot/dts/mpc8560ads.dts
Kumar Gala 1b3c5cdab4 [POWERPC] Move PCI nodes to be sibilings with SOC nodes 
Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:22 -05:00

323 lines
7.3 KiB
Plaintext
Raw Blame History

/*
* MPC8560 ADS Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8560ADS";
compatible = "MPC8560ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8560@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <04ead9a0>;
bus-frequency = <13ab6680>;
clock-frequency = <312c8040>;
};
};
memory {
device_type = "memory";
reg = <00000000 10000000>;
};
soc8560@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <13ab6680>;
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
reg = <2000 1000>;
interrupt-parent = <&mpic>;
interrupts = <12 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <20000 1000>;
cache-line-size = <20>; // 32 bytes
cache-size = <40000>; // L2, 256K
interrupt-parent = <&mpic>;
interrupts = <10 2>;
};
mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
/*
* address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <1d 2 1e 2 22 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
/*
* address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 2 24 2 28 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
device_type = "open-pic";
};
cpm@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "cpm";
model = "CPM2";
ranges = <0 0 c0000>;
reg = <80000 40000>;
command-proc = <919c0>;
brg-frequency = <9d5b340>;
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <2e 2>;
interrupt-parent = <&mpic>;
reg = <90c00 80>;
device_type = "cpm-pic";
};
scc@91a00 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <1>;
reg = <91a00 20 88000 100>;
clock-setup = <00ffffff 0>;
rx-clock = <1>;
tx-clock = <1>;
current-speed = <1c200>;
interrupts = <28 8>;
interrupt-parent = <&cpmpic>;
};
scc@91a20 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <2>;
reg = <91a20 20 88100 100>;
clock-setup = <ff00ffff 90000>;
rx-clock = <2>;
tx-clock = <2>;
current-speed = <1c200>;
interrupts = <29 8>;
interrupt-parent = <&cpmpic>;
};
fcc@91320 {
device_type = "network";
compatible = "fs_enet";
model = "FCC";
device-id = <2>;
reg = <91320 20 88500 100 913a0 30>;
/*
* mac-address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
clock-setup = <ff00ffff 250000>;
rx-clock = <15>;
tx-clock = <16>;
interrupts = <21 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
fcc@91340 {
device_type = "network";
compatible = "fs_enet";
model = "FCC";
device-id = <3>;
reg = <91340 20 88600 100 913d0 30>;
/*
* mac-address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
clock-setup = <ffff00ff 3700>;
rx-clock = <17>;
tx-clock = <18>;
interrupts = <22 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
};
};
};
pci@e0008000 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
reg = <e0008000 1000>;
clock-frequency = <3f940aa>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x2 */
1000 0 0 1 &mpic 1 1
1000 0 0 2 &mpic 2 1
1000 0 0 3 &mpic 3 1
1000 0 0 4 &mpic 4 1
/* IDSEL 0x3 */
1800 0 0 1 &mpic 4 1
1800 0 0 2 &mpic 1 1
1800 0 0 3 &mpic 2 1
1800 0 0 4 &mpic 3 1
/* IDSEL 0x4 */
2000 0 0 1 &mpic 3 1
2000 0 0 2 &mpic 4 1
2000 0 0 3 &mpic 1 1
2000 0 0 4 &mpic 2 1
/* IDSEL 0x5 */
2800 0 0 1 &mpic 2 1
2800 0 0 2 &mpic 3 1
2800 0 0 3 &mpic 4 1
2800 0 0 4 &mpic 1 1
/* IDSEL 12 */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 4 1
/* IDSEL 13 */
6800 0 0 1 &mpic 4 1
6800 0 0 2 &mpic 1 1
6800 0 0 3 &mpic 2 1
6800 0 0 4 &mpic 3 1
/* IDSEL 14*/
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 4 1
7000 0 0 3 &mpic 1 1
7000 0 0 4 &mpic 2 1
/* IDSEL 15 */
7800 0 0 1 &mpic 2 1
7800 0 0 2 &mpic 3 1
7800 0 0 3 &mpic 4 1
7800 0 0 4 &mpic 1 1
/* IDSEL 18 */
9000 0 0 1 &mpic 1 1
9000 0 0 2 &mpic 2 1
9000 0 0 3 &mpic 3 1
9000 0 0 4 &mpic 4 1
/* IDSEL 19 */
9800 0 0 1 &mpic 4 1
9800 0 0 2 &mpic 1 1
9800 0 0 3 &mpic 2 1
9800 0 0 4 &mpic 3 1
/* IDSEL 20 */
a000 0 0 1 &mpic 3 1
a000 0 0 2 &mpic 4 1
a000 0 0 3 &mpic 1 1
a000 0 0 4 &mpic 2 1
/* IDSEL 21 */
a800 0 0 1 &mpic 2 1
a800 0 0 2 &mpic 3 1
a800 0 0 3 &mpic 4 1
a800 0 0 4 &mpic 1 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 01000000>;
};
};
Reference in New Issue View Git Blame Copy Permalink