davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4fdfefe529
kernel-ark/drivers/scsi/qla2xxx/qla_isr.c
Andrew Vasquez 4fdfefe529 [SCSI] qla2xxx: Add support to dynamically enable/disable ZIO. 
ISP23xx and ISP24xx chips have support for an adaptive
method of posting SCSI command completions for multiple SCSI
commands during a single system interrupt.

SCSI commands are placed on the system response queue
without interrupting the host until 1) a delay timer
expires; or 2) a SCSI command completes with an error.

As long as the host software (qla2xxx) services the response
queue for completions (this polling is done during
queuecommand()) within the 'delay timer' period, the
firmware will not generate system interrupt.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 11:52:11 -05:00

1536 lines
41 KiB
C
Raw Blame History

/*
* QLOGIC LINUX SOFTWARE
*
* QLogic ISP2x00 device driver for Linux 2.6.x
* Copyright (C) 2003-2005 QLogic Corporation
* (www.qlogic.com)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
*/
#include "qla_def.h"
static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
static void qla2x00_async_event(scsi_qla_host_t *, uint16_t *);
static void qla2x00_process_completed_request(struct scsi_qla_host *, uint32_t);
static void qla2x00_status_entry(scsi_qla_host_t *, void *);
static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
static void qla2x00_error_entry(scsi_qla_host_t *, sts_entry_t *);
static void qla2x00_ms_entry(scsi_qla_host_t *, ms_iocb_entry_t *);
static void qla24xx_ms_entry(scsi_qla_host_t *, struct ct_entry_24xx *);
/**
* qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
* @irq:
* @dev_id: SCSI driver HA context
* @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
{
scsi_qla_host_t *ha;
struct device_reg_2xxx __iomem *reg;
int status;
unsigned long flags;
unsigned long iter;
uint16_t mb[4];
ha = (scsi_qla_host_t *) dev_id;
if (!ha) {
printk(KERN_INFO
"%s(): NULL host pointer\n", __func__);
return (IRQ_NONE);
}
reg = &ha->iobase->isp;
status = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (iter = 50; iter--; ) {
if ((RD_REG_WORD(&reg->istatus) & ISR_RISC_INT) == 0)
break;
if (RD_REG_WORD(&reg->semaphore) & BIT_0) {
WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
RD_REG_WORD(&reg->hccr);
/* Get mailbox data. */
mb[0] = RD_MAILBOX_REG(ha, reg, 0);
if (mb[0] > 0x3fff && mb[0] < 0x8000) {
qla2x00_mbx_completion(ha, mb[0]);
status |= MBX_INTERRUPT;
} else if (mb[0] > 0x7fff && mb[0] < 0xc000) {
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
qla2x00_async_event(ha, mb);
} else {
/*EMPTY*/
DEBUG2(printk("scsi(%ld): Unrecognized "
"interrupt type (%d).\n",
ha->host_no, mb[0]));
}
/* Release mailbox registers. */
WRT_REG_WORD(&reg->semaphore, 0);
RD_REG_WORD(&reg->semaphore);
} else {
qla2x00_process_response_queue(ha);
WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
RD_REG_WORD(&reg->hccr);
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
spin_lock_irqsave(&ha->mbx_reg_lock, flags);
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
up(&ha->mbx_intr_sem);
spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
return (IRQ_HANDLED);
}
/**
* qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
* @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
{
scsi_qla_host_t *ha;
struct device_reg_2xxx __iomem *reg;
int status;
unsigned long flags;
unsigned long iter;
uint32_t stat;
uint16_t hccr;
uint16_t mb[4];
ha = (scsi_qla_host_t *) dev_id;
if (!ha) {
printk(KERN_INFO
"%s(): NULL host pointer\n", __func__);
return (IRQ_NONE);
}
reg = &ha->iobase->isp;
status = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
if (stat & HSR_RISC_PAUSED) {
hccr = RD_REG_WORD(&reg->hccr);
if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
qla_printk(KERN_INFO, ha,
"Parity error -- HCCR=%x.\n", hccr);
else
qla_printk(KERN_INFO, ha,
"RISC paused -- HCCR=%x.\n", hccr);
/*
* Issue a "HARD" reset in order for the RISC
* interrupt bit to be cleared. Schedule a big
* hammmer to get out of the RISC PAUSED state.
*/
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
RD_REG_WORD(&reg->hccr);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
} else if ((stat & HSR_RISC_INT) == 0)
break;
switch (stat & 0xff) {
case 0x1:
case 0x2:
case 0x10:
case 0x11:
qla2x00_mbx_completion(ha, MSW(stat));
status |= MBX_INTERRUPT;
/* Release mailbox registers. */
WRT_REG_WORD(&reg->semaphore, 0);
break;
case 0x12:
mb[0] = MSW(stat);
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
qla2x00_async_event(ha, mb);
break;
case 0x13:
qla2x00_process_response_queue(ha);
break;
case 0x15:
mb[0] = MBA_CMPLT_1_16BIT;
mb[1] = MSW(stat);
qla2x00_async_event(ha, mb);
break;
case 0x16:
mb[0] = MBA_SCSI_COMPLETION;
mb[1] = MSW(stat);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
qla2x00_async_event(ha, mb);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
ha->host_no, stat & 0xff));
break;
}
WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
RD_REG_WORD_RELAXED(&reg->hccr);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
spin_lock_irqsave(&ha->mbx_reg_lock, flags);
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
up(&ha->mbx_intr_sem);
spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
return (IRQ_HANDLED);
}
/**
* qla2x00_mbx_completion() - Process mailbox command completions.
* @ha: SCSI driver HA context
* @mb0: Mailbox0 register
*/
static void
qla2x00_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0)
{
uint16_t cnt;
uint16_t __iomem *wptr;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Load return mailbox registers. */
ha->flags.mbox_int = 1;
ha->mailbox_out[0] = mb0;
wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 1);
for (cnt = 1; cnt < ha->mbx_count; cnt++) {
if (IS_QLA2200(ha) && cnt == 8)
wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8);
if (cnt == 4 || cnt == 5)
ha->mailbox_out[cnt] = qla2x00_debounce_register(wptr);
else
ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
wptr++;
}
if (ha->mcp) {
DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n",
__func__, ha->host_no, ha->mcp->mb[0]));
} else {
DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
__func__, ha->host_no));
}
}
/**
* qla2x00_async_event() - Process aynchronous events.
* @ha: SCSI driver HA context
* @mb: Mailbox registers (0 - 3)
*/
static void
qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
{
#define LS_UNKNOWN 2
static char *link_speeds[5] = { "1", "2", "?", "4", "10" };
char *link_speed;
uint16_t handle_cnt;
uint16_t cnt;
uint32_t handles[5];
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
/* Setup to process RIO completion. */
handle_cnt = 0;
switch (mb[0]) {
case MBA_SCSI_COMPLETION:
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
handle_cnt = 1;
break;
case MBA_CMPLT_1_16BIT:
handles[0] = mb[1];
handle_cnt = 1;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_2_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handle_cnt = 2;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_3_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handle_cnt = 3;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_4_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
handle_cnt = 4;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_5_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
handles[4] = (uint32_t)RD_MAILBOX_REG(ha, reg, 7);
handle_cnt = 5;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_2_32BIT:
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
handles[1] = le32_to_cpu(
((uint32_t)(RD_MAILBOX_REG(ha, reg, 7) << 16)) |
RD_MAILBOX_REG(ha, reg, 6));
handle_cnt = 2;
mb[0] = MBA_SCSI_COMPLETION;
break;
default:
break;
}
switch (mb[0]) {
case MBA_SCSI_COMPLETION: /* Fast Post */
if (!ha->flags.online)
break;
for (cnt = 0; cnt < handle_cnt; cnt++)
qla2x00_process_completed_request(ha, handles[cnt]);
break;
case MBA_RESET: /* Reset */
DEBUG2(printk("scsi(%ld): Asynchronous RESET.\n", ha->host_no));
set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
break;
case MBA_SYSTEM_ERR: /* System Error */
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
qla_printk(KERN_INFO, ha,
"ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n",
mb[1], mb[2], mb[3]);
ha->isp_ops.fw_dump(ha, 1);
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
if (mb[1] == 0 && mb[2] == 0) {
qla_printk(KERN_ERR, ha,
"Unrecoverable Hardware Error: adapter "
"marked OFFLINE!\n");
ha->flags.online = 0;
} else
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
} else if (mb[1] == 0) {
qla_printk(KERN_INFO, ha,
"Unrecoverable Hardware Error: adapter marked "
"OFFLINE!\n");
ha->flags.online = 0;
} else
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
DEBUG2(printk("scsi(%ld): ISP Request Transfer Error.\n",
ha->host_no));
qla_printk(KERN_WARNING, ha, "ISP Request Transfer Error.\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
DEBUG2(printk("scsi(%ld): ISP Response Transfer Error.\n",
ha->host_no));
qla_printk(KERN_WARNING, ha, "ISP Response Transfer Error.\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
DEBUG2(printk("scsi(%ld): Asynchronous WAKEUP_THRES.\n",
ha->host_no));
break;
case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */
DEBUG2(printk("scsi(%ld): LIP occured (%x).\n", ha->host_no,
mb[1]));
qla_printk(KERN_INFO, ha, "LIP occured (%x).\n", mb[1]);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(ha);
}
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
ha->flags.management_server_logged_in = 0;
/* Update AEN queue. */
qla2x00_enqueue_aen(ha, MBA_LIP_OCCURRED, NULL);
break;
case MBA_LOOP_UP: /* Loop Up Event */
ha->link_data_rate = 0;
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
link_speed = link_speeds[0];
} else {
link_speed = link_speeds[LS_UNKNOWN];
if (mb[1] < 5)
link_speed = link_speeds[mb[1]];
ha->link_data_rate = mb[1];
}
DEBUG2(printk("scsi(%ld): Asynchronous LOOP UP (%s Gbps).\n",
ha->host_no, link_speed));
qla_printk(KERN_INFO, ha, "LOOP UP detected (%s Gbps).\n",
link_speed);
ha->flags.management_server_logged_in = 0;
/* Update AEN queue. */
qla2x00_enqueue_aen(ha, MBA_LOOP_UP, NULL);
break;
case MBA_LOOP_DOWN: /* Loop Down Event */
DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN (%x).\n",
ha->host_no, mb[1]));
qla_printk(KERN_INFO, ha, "LOOP DOWN detected (%x).\n", mb[1]);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
ha->device_flags |= DFLG_NO_CABLE;
qla2x00_mark_all_devices_lost(ha);
}
ha->flags.management_server_logged_in = 0;
ha->link_data_rate = 0;
if (ql2xfdmienable)
set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
/* Update AEN queue. */
qla2x00_enqueue_aen(ha, MBA_LOOP_DOWN, NULL);
break;
case MBA_LIP_RESET: /* LIP reset occurred */
DEBUG2(printk("scsi(%ld): Asynchronous LIP RESET (%x).\n",
ha->host_no, mb[1]));
qla_printk(KERN_INFO, ha,
"LIP reset occured (%x).\n", mb[1]);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(ha);
}
set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
ha->operating_mode = LOOP;
ha->flags.management_server_logged_in = 0;
/* Update AEN queue. */
qla2x00_enqueue_aen(ha, MBA_LIP_RESET, NULL);
break;
case MBA_POINT_TO_POINT: /* Point-to-Point */
if (IS_QLA2100(ha))
break;
DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE received.\n",
ha->host_no));
/*
* Until there's a transition from loop down to loop up, treat
* this as loop down only.
*/
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(ha);
}
if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
}
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
break;
case MBA_CHG_IN_CONNECTION: /* Change in connection mode */
if (IS_QLA2100(ha))
break;
DEBUG2(printk("scsi(%ld): Asynchronous Change In Connection "
"received.\n",
ha->host_no));
qla_printk(KERN_INFO, ha,
"Configuration change detected: value=%x.\n", mb[1]);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(ha);
}
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
break;
case MBA_PORT_UPDATE: /* Port database update */
/*
* If a single remote port just logged into (or logged out of)
* us, create a new entry in our rscn fcports list and handle
* the event like an RSCN.
*/
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA6312(ha) &&
!IS_QLA6322(ha) && !IS_QLA24XX(ha) && !IS_QLA25XX(ha) &&
ha->flags.init_done && mb[1] != 0xffff &&
((ha->operating_mode == P2P && mb[1] != 0) ||
(ha->operating_mode != P2P && mb[1] !=
SNS_FIRST_LOOP_ID)) && (mb[2] == 6 || mb[2] == 7)) {
int rval;
fc_port_t *rscn_fcport;
/* Create new fcport for login. */
rscn_fcport = qla2x00_alloc_rscn_fcport(ha, GFP_ATOMIC);
if (rscn_fcport) {
DEBUG14(printk("scsi(%ld): Port Update -- "
"creating RSCN fcport %p for %x/%x/%x.\n",
ha->host_no, rscn_fcport, mb[1], mb[2],
mb[3]));
rscn_fcport->loop_id = mb[1];
rscn_fcport->d_id.b24 = INVALID_PORT_ID;
atomic_set(&rscn_fcport->state,
FCS_DEVICE_LOST);
list_add_tail(&rscn_fcport->list,
&ha->rscn_fcports);
rval = qla2x00_handle_port_rscn(ha, 0,
rscn_fcport, 1);
if (rval == QLA_SUCCESS)
break;
} else {
DEBUG14(printk("scsi(%ld): Port Update -- "
"-- unable to allocate RSCN fcport "
"login.\n", ha->host_no));
}
}
/*
* If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
* event etc. earlier indicating loop is down) then process
* it. Otherwise ignore it and Wait for RSCN to come in.
*/
atomic_set(&ha->loop_down_timer, 0);
if (atomic_read(&ha->loop_state) != LOOP_DOWN &&
atomic_read(&ha->loop_state) != LOOP_DEAD) {
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE "
"ignored %04x/%04x/%04x.\n", ha->host_no, mb[1],
mb[2], mb[3]));
break;
}
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE.\n",
ha->host_no));
DEBUG(printk(KERN_INFO
"scsi(%ld): Port database changed %04x %04x %04x.\n",
ha->host_no, mb[1], mb[2], mb[3]));
/*
* Mark all devices as missing so we will login again.
*/
atomic_set(&ha->loop_state, LOOP_UP);
qla2x00_mark_all_devices_lost(ha);
ha->flags.rscn_queue_overflow = 1;
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
/* Update AEN queue. */
qla2x00_enqueue_aen(ha, MBA_PORT_UPDATE, NULL);
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
ha->host_no));
DEBUG(printk(KERN_INFO
"scsi(%ld): RSCN database changed -- %04x %04x.\n",
ha->host_no, mb[1], mb[2]));
rscn_entry = (mb[1] << 16) | mb[2];
host_pid = (ha->d_id.b.domain << 16) | (ha->d_id.b.area << 8) |
ha->d_id.b.al_pa;
if (rscn_entry == host_pid) {
DEBUG(printk(KERN_INFO
"scsi(%ld): Ignoring RSCN update to local host "
"port ID (%06x)\n",
ha->host_no, host_pid));
break;
}
rscn_queue_index = ha->rscn_in_ptr + 1;
if (rscn_queue_index == MAX_RSCN_COUNT)
rscn_queue_index = 0;
if (rscn_queue_index != ha->rscn_out_ptr) {
ha->rscn_queue[ha->rscn_in_ptr] = rscn_entry;
ha->rscn_in_ptr = rscn_queue_index;
} else {
ha->flags.rscn_queue_overflow = 1;
}
atomic_set(&ha->loop_state, LOOP_UPDATE);
atomic_set(&ha->loop_down_timer, 0);
ha->flags.management_server_logged_in = 0;
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
set_bit(RSCN_UPDATE, &ha->dpc_flags);
/* Update AEN queue. */
qla2x00_enqueue_aen(ha, MBA_RSCN_UPDATE, &mb[0]);
break;
/* case MBA_RIO_RESPONSE: */
case MBA_ZIO_RESPONSE:
DEBUG2(printk("scsi(%ld): [R|Z]IO update completion.\n",
ha->host_no));
DEBUG(printk(KERN_INFO
"scsi(%ld): [R|Z]IO update completion.\n",
ha->host_no));
if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
qla24xx_process_response_queue(ha);
else
qla2x00_process_response_queue(ha);
break;
case MBA_DISCARD_RND_FRAME:
DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x "
"%04x.\n", ha->host_no, mb[1], mb[2], mb[3]));
break;
}
}
/**
* qla2x00_process_completed_request() - Process a Fast Post response.
* @ha: SCSI driver HA context
* @index: SRB index
*/
static void
qla2x00_process_completed_request(struct scsi_qla_host *ha, uint32_t index)
{
srb_t *sp;
/* Validate handle. */
if (index >= MAX_OUTSTANDING_COMMANDS) {
DEBUG2(printk("scsi(%ld): Invalid SCSI completion handle %d.\n",
ha->host_no, index));
qla_printk(KERN_WARNING, ha,
"Invalid SCSI completion handle %d.\n", index);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
return;
}
sp = ha->outstanding_cmds[index];
if (sp) {
/* Free outstanding command slot. */
ha->outstanding_cmds[index] = NULL;
CMD_COMPL_STATUS(sp->cmd) = 0L;
CMD_SCSI_STATUS(sp->cmd) = 0L;
/* Save ISP completion status */
sp->cmd->result = DID_OK << 16;
qla2x00_sp_compl(ha, sp);
} else {
DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
ha->host_no));
qla_printk(KERN_WARNING, ha,
"Invalid ISP SCSI completion handle\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
}
}
/**
* qla2x00_process_response_queue() - Process response queue entries.
* @ha: SCSI driver HA context
*/
void
qla2x00_process_response_queue(struct scsi_qla_host *ha)
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
sts_entry_t *pkt;
uint16_t handle_cnt;
uint16_t cnt;
if (!ha->flags.online)
return;
while (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) {
pkt = (sts_entry_t *)ha->response_ring_ptr;
ha->rsp_ring_index++;
if (ha->rsp_ring_index == ha->response_q_length) {
ha->rsp_ring_index = 0;
ha->response_ring_ptr = ha->response_ring;
} else {
ha->response_ring_ptr++;
}
if (pkt->entry_status != 0) {
DEBUG3(printk(KERN_INFO
"scsi(%ld): Process error entry.\n", ha->host_no));
qla2x00_error_entry(ha, pkt);
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
continue;
}
switch (pkt->entry_type) {
case STATUS_TYPE:
qla2x00_status_entry(ha, pkt);
break;
case STATUS_TYPE_21:
handle_cnt = ((sts21_entry_t *)pkt)->handle_count;
for (cnt = 0; cnt < handle_cnt; cnt++) {
qla2x00_process_completed_request(ha,
((sts21_entry_t *)pkt)->handle[cnt]);
}
break;
case STATUS_TYPE_22:
handle_cnt = ((sts22_entry_t *)pkt)->handle_count;
for (cnt = 0; cnt < handle_cnt; cnt++) {
qla2x00_process_completed_request(ha,
((sts22_entry_t *)pkt)->handle[cnt]);
}
break;
case STATUS_CONT_TYPE:
qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt);
break;
case MS_IOCB_TYPE:
qla2x00_ms_entry(ha, (ms_iocb_entry_t *)pkt);
break;
case MBX_IOCB_TYPE:
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) &&
!IS_QLA6312(ha) && !IS_QLA6322(ha)) {
if (pkt->sys_define == SOURCE_ASYNC_IOCB) {
qla2x00_process_iodesc(ha,
(struct mbx_entry *)pkt);
} else {
/* MBX IOCB Type Not Supported. */
DEBUG4(printk(KERN_WARNING
"scsi(%ld): Received unknown MBX "
"IOCB response pkt type=%x "
"source=%x entry status=%x.\n",
ha->host_no, pkt->entry_type,
pkt->sys_define,
pkt->entry_status));
}
break;
}
/* Fallthrough. */
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
"scsi(%ld): Received unknown response pkt type %x "
"entry status=%x.\n",
ha->host_no, pkt->entry_type, pkt->entry_status));
break;
}
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
}
/* Adjust ring index */
WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), ha->rsp_ring_index);
}
/**
* qla2x00_status_entry() - Process a Status IOCB entry.
* @ha: SCSI driver HA context
* @pkt: Entry pointer
*/
static void
qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
{
srb_t *sp;
fc_port_t *fcport;
struct scsi_cmnd *cp;
sts_entry_t *sts;
struct sts_entry_24xx *sts24;
uint16_t comp_status;
uint16_t scsi_status;
uint8_t lscsi_status;
int32_t resid;
uint32_t sense_len, rsp_info_len, resid_len;
uint8_t *rsp_info, *sense_data;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
comp_status = le16_to_cpu(sts24->comp_status);
scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK;
} else {
comp_status = le16_to_cpu(sts->comp_status);
scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
}
/* Fast path completion. */
if (comp_status == CS_COMPLETE && scsi_status == 0) {
qla2x00_process_completed_request(ha, sts->handle);
return;
}
/* Validate handle. */
if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
sp = ha->outstanding_cmds[sts->handle];
ha->outstanding_cmds[sts->handle] = NULL;
} else
sp = NULL;
if (sp == NULL) {
DEBUG2(printk("scsi(%ld): Status Entry invalid handle.\n",
ha->host_no));
qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
if (ha->dpc_wait && !ha->dpc_active)
up(ha->dpc_wait);
return;
}
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("scsi(%ld): Command already returned back to OS "
"pkt->handle=%d sp=%p sp->state:%d\n",
ha->host_no, sts->handle, sp, sp->state));
qla_printk(KERN_WARNING, ha,
"Command is NULL: already returned to OS (sp=%p)\n", sp);
return;
}
lscsi_status = scsi_status & STATUS_MASK;
CMD_ENTRY_STATUS(cp) = sts->entry_status;
CMD_COMPL_STATUS(cp) = comp_status;
CMD_SCSI_STATUS(cp) = scsi_status;
fcport = sp->fcport;
sense_len = rsp_info_len = resid_len = 0;
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
sense_len = le32_to_cpu(sts24->sense_len);
rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
resid_len = le32_to_cpu(sts24->rsp_residual_count);
rsp_info = sts24->data;
sense_data = sts24->data;
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
} else {
sense_len = le16_to_cpu(sts->req_sense_length);
rsp_info_len = le16_to_cpu(sts->rsp_info_len);
resid_len = le32_to_cpu(sts->residual_length);
rsp_info = sts->rsp_info;
sense_data = sts->req_sense_data;
}
/* Check for any FCP transport errors. */
if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) {
/* Sense data lies beyond any FCP RESPONSE data. */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
sense_data += rsp_info_len;
if (rsp_info_len > 3 && rsp_info[3]) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol "
"failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..."
"retrying command\n", ha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, rsp_info_len, rsp_info[0],
rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4],
rsp_info[5], rsp_info[6], rsp_info[7]));
cp->result = DID_BUS_BUSY << 16;
qla2x00_sp_compl(ha, sp);
return;
}
}
/*
* Based on Host and scsi status generate status code for Linux
*/
switch (comp_status) {
case CS_COMPLETE:
if (scsi_status == 0) {
cp->result = DID_OK << 16;
break;
}
if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) {
resid = resid_len;
cp->resid = resid;
CMD_RESID_LEN(cp) = resid;
}
cp->result = DID_OK << 16 | lscsi_status;
if (lscsi_status != SS_CHECK_CONDITION)
break;
/* Copy Sense Data into sense buffer. */
memset(cp->sense_buffer, 0, sizeof(cp->sense_buffer));
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
if (sense_len >= sizeof(cp->sense_buffer))
sense_len = sizeof(cp->sense_buffer);
CMD_ACTUAL_SNSLEN(cp) = sense_len;
sp->request_sense_length = sense_len;
sp->request_sense_ptr = cp->sense_buffer;
if (sp->request_sense_length > 32)
sense_len = 32;
memcpy(cp->sense_buffer, sense_data, sense_len);
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
ha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, "
"scsi(%ld:%d:%d:%d) cmd=%p pid=%ld\n", __func__,
ha->host_no, cp->device->channel, cp->device->id,
cp->device->lun, cp, cp->serial_number));
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
break;
case CS_DATA_UNDERRUN:
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d) UNDERRUN status detected 0x%x-0x%x.\n",
ha->host_no, cp->device->id, cp->device->lun, comp_status,
scsi_status));
resid = resid_len;
if (scsi_status & SS_RESIDUAL_UNDER) {
cp->resid = resid;
CMD_RESID_LEN(cp) = resid;
}
/*
* Check to see if SCSI Status is non zero. If so report SCSI
* Status.
*/
if (lscsi_status != 0) {
cp->result = DID_OK << 16 | lscsi_status;
if (lscsi_status != SS_CHECK_CONDITION)
break;
/* Copy Sense Data into sense buffer */
memset(cp->sense_buffer, 0, sizeof(cp->sense_buffer));
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
if (sense_len >= sizeof(cp->sense_buffer))
sense_len = sizeof(cp->sense_buffer);
CMD_ACTUAL_SNSLEN(cp) = sense_len;
sp->request_sense_length = sense_len;
sp->request_sense_ptr = cp->sense_buffer;
if (sp->request_sense_length > 32)
sense_len = 32;
memcpy(cp->sense_buffer, sense_data, sense_len);
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
ha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, "
"scsi(%ld:%d:%d:%d) cmd=%p pid=%ld\n",
__func__, ha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, cp,
cp->serial_number));
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
} else {
/*
* If RISC reports underrun and target does not report
* it then we must have a lost frame, so tell upper
* layer to retry it by reporting a bus busy.
*/
if (!(scsi_status & SS_RESIDUAL_UNDER)) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
"frame(s) detected (%x of %x bytes)..."
"retrying command.\n", ha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, resid,
cp->request_bufflen));
cp->result = DID_BUS_BUSY << 16;
break;
}
/* Handle mid-layer underflow */
if ((unsigned)(cp->request_bufflen - resid) <
cp->underflow) {
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): Mid-layer underflow "
"detected (%x of %x bytes)...returning "
"error status.\n", ha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, resid,
cp->request_bufflen);
cp->result = DID_ERROR << 16;
break;
}
/* Everybody online, looking good... */
cp->result = DID_OK << 16;
}
break;
case CS_DATA_OVERRUN:
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n",
ha->host_no, cp->device->id, cp->device->lun, comp_status,
scsi_status));
DEBUG2(printk(KERN_INFO
"CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3],
cp->cmnd[4], cp->cmnd[5]));
DEBUG2(printk(KERN_INFO
"PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR "
"status!\n",
cp->serial_number, cp->request_bufflen, resid_len));
cp->result = DID_ERROR << 16;
break;
case CS_PORT_LOGGED_OUT:
case CS_PORT_CONFIG_CHG:
case CS_PORT_BUSY:
case CS_INCOMPLETE:
case CS_PORT_UNAVAILABLE:
/*
* If the port is in Target Down state, return all IOs for this
* Target with DID_NO_CONNECT ELSE Queue the IOs in the
* retry_queue.
*/
DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down "
"pid=%ld, compl status=0x%x, port state=0x%x\n",
ha->host_no, cp->device->id, cp->device->lun,
cp->serial_number, comp_status,
atomic_read(&fcport->state)));
cp->result = DID_BUS_BUSY << 16;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
qla2x00_mark_device_lost(ha, fcport, 1);
}
break;
case CS_RESET:
DEBUG2(printk(KERN_INFO
"scsi(%ld): RESET status detected 0x%x-0x%x.\n",
ha->host_no, comp_status, scsi_status));
cp->result = DID_RESET << 16;
break;
case CS_ABORTED:
/*
* hv2.19.12 - DID_ABORT does not retry the request if we
* aborted this request then abort otherwise it must be a
* reset.
*/
DEBUG2(printk(KERN_INFO
"scsi(%ld): ABORT status detected 0x%x-0x%x.\n",
ha->host_no, comp_status, scsi_status));
cp->result = DID_RESET << 16;
break;
case CS_TIMEOUT:
cp->result = DID_BUS_BUSY << 16;
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected "
"0x%x-0x%x\n", ha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status,
scsi_status));
break;
}
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x "
"sflags=%x.\n", ha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status, scsi_status,
le16_to_cpu(sts->status_flags)));
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
qla2x00_mark_device_lost(ha, fcport, 1);
break;
case CS_QUEUE_FULL:
DEBUG2(printk(KERN_INFO
"scsi(%ld): QUEUE FULL status detected 0x%x-0x%x.\n",
ha->host_no, comp_status, scsi_status));
/* SCSI Mid-Layer handles device queue full */
cp->result = DID_OK << 16 | lscsi_status;
break;
default:
DEBUG3(printk("scsi(%ld): Error detected (unknown status) "
"0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status));
qla_printk(KERN_INFO, ha,
"Unknown status detected 0x%x-0x%x.\n",
comp_status, scsi_status);
cp->result = DID_ERROR << 16;
break;
}
/* Place command on done queue. */
if (ha->status_srb == NULL)
qla2x00_sp_compl(ha, sp);
}
/**
* qla2x00_status_cont_entry() - Process a Status Continuations entry.
* @ha: SCSI driver HA context
* @pkt: Entry pointer
*
* Extended sense data.
*/
static void
qla2x00_status_cont_entry(scsi_qla_host_t *ha, sts_cont_entry_t *pkt)
{
uint8_t sense_sz = 0;
srb_t *sp = ha->status_srb;
struct scsi_cmnd *cp;
if (sp != NULL && sp->request_sense_length != 0) {
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("%s(): Cmd already returned back to OS "
"sp=%p sp->state:%d\n", __func__, sp, sp->state));
qla_printk(KERN_INFO, ha,
"cmd is NULL: already returned to OS (sp=%p)\n",
sp);
ha->status_srb = NULL;
return;
}
if (sp->request_sense_length > sizeof(pkt->data)) {
sense_sz = sizeof(pkt->data);
} else {
sense_sz = sp->request_sense_length;
}
/* Move sense data. */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
host_to_fcp_swap(pkt->data, sizeof(pkt->data));
memcpy(sp->request_sense_ptr, pkt->data, sense_sz);
DEBUG5(qla2x00_dump_buffer(sp->request_sense_ptr, sense_sz));
sp->request_sense_ptr += sense_sz;
sp->request_sense_length -= sense_sz;
/* Place command on done queue. */
if (sp->request_sense_length == 0) {
ha->status_srb = NULL;
qla2x00_sp_compl(ha, sp);
}
}
}
/**
* qla2x00_error_entry() - Process an error entry.
* @ha: SCSI driver HA context
* @pkt: Entry pointer
*/
static void
qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
{
srb_t *sp;
#if defined(QL_DEBUG_LEVEL_2)
if (pkt->entry_status & RF_INV_E_ORDER)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
else if (pkt->entry_status & RF_INV_E_COUNT)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Count\n", __func__);
else if (pkt->entry_status & RF_INV_E_PARAM)
qla_printk(KERN_ERR, ha,
"%s: Invalid Entry Parameter\n", __func__);
else if (pkt->entry_status & RF_INV_E_TYPE)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Type\n", __func__);
else if (pkt->entry_status & RF_BUSY)
qla_printk(KERN_ERR, ha, "%s: Busy\n", __func__);
else
qla_printk(KERN_ERR, ha, "%s: UNKNOWN flag error\n", __func__);
#endif
/* Validate handle. */
if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
sp = ha->outstanding_cmds[pkt->handle];
else
sp = NULL;
if (sp) {
/* Free outstanding command slot. */
ha->outstanding_cmds[pkt->handle] = NULL;
/* Bad payload or header */
if (pkt->entry_status &
(RF_INV_E_ORDER | RF_INV_E_COUNT |
RF_INV_E_PARAM | RF_INV_E_TYPE)) {
sp->cmd->result = DID_ERROR << 16;
} else if (pkt->entry_status & RF_BUSY) {
sp->cmd->result = DID_BUS_BUSY << 16;
} else {
sp->cmd->result = DID_ERROR << 16;
}
qla2x00_sp_compl(ha, sp);
} else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type ==
COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) {
DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n",
ha->host_no));
qla_printk(KERN_WARNING, ha,
"Error entry - invalid handle\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
if (ha->dpc_wait && !ha->dpc_active)
up(ha->dpc_wait);
}
}
/**
* qla2x00_ms_entry() - Process a Management Server entry.
* @ha: SCSI driver HA context
* @index: Response queue out pointer
*/
static void
qla2x00_ms_entry(scsi_qla_host_t *ha, ms_iocb_entry_t *pkt)
{
srb_t *sp;
DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
__func__, ha->host_no, pkt, pkt->handle1));
/* Validate handle. */
if (pkt->handle1 < MAX_OUTSTANDING_COMMANDS)
sp = ha->outstanding_cmds[pkt->handle1];
else
sp = NULL;
if (sp == NULL) {
DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n",
ha->host_no));
qla_printk(KERN_WARNING, ha, "MS entry - invalid handle\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
return;
}
CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->status);
CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status;
/* Free outstanding command slot. */
ha->outstanding_cmds[pkt->handle1] = NULL;
qla2x00_sp_compl(ha, sp);
}
/**
* qla24xx_mbx_completion() - Process mailbox command completions.
* @ha: SCSI driver HA context
* @mb0: Mailbox0 register
*/
static void
qla24xx_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0)
{
uint16_t cnt;
uint16_t __iomem *wptr;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
/* Load return mailbox registers. */
ha->flags.mbox_int = 1;
ha->mailbox_out[0] = mb0;
wptr = (uint16_t __iomem *)&reg->mailbox1;
for (cnt = 1; cnt < ha->mbx_count; cnt++) {
ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
wptr++;
}
if (ha->mcp) {
DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n",
__func__, ha->host_no, ha->mcp->mb[0]));
} else {
DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
__func__, ha->host_no));
}
}
/**
* qla24xx_process_response_queue() - Process response queue entries.
* @ha: SCSI driver HA context
*/
void
qla24xx_process_response_queue(struct scsi_qla_host *ha)
{
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
struct sts_entry_24xx *pkt;
if (!ha->flags.online)
return;
while (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) {
pkt = (struct sts_entry_24xx *)ha->response_ring_ptr;
ha->rsp_ring_index++;
if (ha->rsp_ring_index == ha->response_q_length) {
ha->rsp_ring_index = 0;
ha->response_ring_ptr = ha->response_ring;
} else {
ha->response_ring_ptr++;
}
if (pkt->entry_status != 0) {
DEBUG3(printk(KERN_INFO
"scsi(%ld): Process error entry.\n", ha->host_no));
qla2x00_error_entry(ha, (sts_entry_t *) pkt);
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
continue;
}
switch (pkt->entry_type) {
case STATUS_TYPE:
qla2x00_status_entry(ha, pkt);
break;
case STATUS_CONT_TYPE:
qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt);
break;
case MS_IOCB_TYPE:
qla24xx_ms_entry(ha, (struct ct_entry_24xx *)pkt);
break;
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
"scsi(%ld): Received unknown response pkt type %x "
"entry status=%x.\n",
ha->host_no, pkt->entry_type, pkt->entry_status));
break;
}
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
}
/* Adjust ring index */
WRT_REG_DWORD(&reg->rsp_q_out, ha->rsp_ring_index);
}
/**
* qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
* @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
qla24xx_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
{
scsi_qla_host_t *ha;
struct device_reg_24xx __iomem *reg;
int status;
unsigned long flags;
unsigned long iter;
uint32_t stat;
uint32_t hccr;
uint16_t mb[4];
ha = (scsi_qla_host_t *) dev_id;
if (!ha) {
printk(KERN_INFO
"%s(): NULL host pointer\n", __func__);
return IRQ_NONE;
}
reg = &ha->iobase->isp24;
status = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(&reg->host_status);
if (stat & HSRX_RISC_PAUSED) {
hccr = RD_REG_DWORD(&reg->hccr);
qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
"Dumping firmware!\n", hccr);
qla24xx_fw_dump(ha, 1);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
} else if ((stat & HSRX_RISC_INT) == 0)
break;
switch (stat & 0xff) {
case 0x1:
case 0x2:
case 0x10:
case 0x11:
qla24xx_mbx_completion(ha, MSW(stat));
status |= MBX_INTERRUPT;
break;
case 0x12:
mb[0] = MSW(stat);
mb[1] = RD_REG_WORD(&reg->mailbox1);
mb[2] = RD_REG_WORD(&reg->mailbox2);
mb[3] = RD_REG_WORD(&reg->mailbox3);
qla2x00_async_event(ha, mb);
break;
case 0x13:
qla24xx_process_response_queue(ha);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
ha->host_no, stat & 0xff));
break;
}
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
RD_REG_DWORD_RELAXED(&reg->hccr);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
spin_lock_irqsave(&ha->mbx_reg_lock, flags);
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
up(&ha->mbx_intr_sem);
spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
return IRQ_HANDLED;
}
/**
* qla24xx_ms_entry() - Process a Management Server entry.
* @ha: SCSI driver HA context
* @index: Response queue out pointer
*/
static void
qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt)
{
srb_t *sp;
DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
__func__, ha->host_no, pkt, pkt->handle));
DEBUG9(printk("%s: ct pkt dump:\n", __func__);)
DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx));)
/* Validate handle. */
if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
sp = ha->outstanding_cmds[pkt->handle];
else
sp = NULL;
if (sp == NULL) {
DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n",
ha->host_no));
DEBUG10(printk("scsi(%ld): MS entry - invalid handle\n",
ha->host_no));
qla_printk(KERN_WARNING, ha, "MS entry - invalid handle %d\n",
pkt->handle);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
return;
}
CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->comp_status);
CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status;
/* Free outstanding command slot. */
ha->outstanding_cmds[pkt->handle] = NULL;
qla2x00_sp_compl(ha, sp);
}
Reference in New Issue View Git Blame Copy Permalink