15ac408ee5
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
161 lines
3.5 KiB
C
161 lines
3.5 KiB
C
/*
|
|
* arch/arm/plat-omap/include/mach/board.h
|
|
*
|
|
* Information structures for board-specific data
|
|
*
|
|
* Copyright (C) 2004 Nokia Corporation
|
|
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
|
|
*/
|
|
|
|
#ifndef _OMAP_BOARD_H
|
|
#define _OMAP_BOARD_H
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <mach/gpio-switch.h>
|
|
|
|
/* Different peripheral ids */
|
|
#define OMAP_TAG_CLOCK 0x4f01
|
|
#define OMAP_TAG_LCD 0x4f05
|
|
#define OMAP_TAG_GPIO_SWITCH 0x4f06
|
|
#define OMAP_TAG_FBMEM 0x4f08
|
|
#define OMAP_TAG_STI_CONSOLE 0x4f09
|
|
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
|
|
|
|
#define OMAP_TAG_BOOT_REASON 0x4f80
|
|
#define OMAP_TAG_FLASH_PART 0x4f81
|
|
#define OMAP_TAG_VERSION_STR 0x4f82
|
|
|
|
struct omap_clock_config {
|
|
/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
|
|
u8 system_clock_type;
|
|
};
|
|
|
|
struct omap_serial_console_config {
|
|
u8 console_uart;
|
|
u32 console_speed;
|
|
};
|
|
|
|
struct omap_sti_console_config {
|
|
unsigned enable:1;
|
|
u8 channel;
|
|
};
|
|
|
|
struct omap_camera_sensor_config {
|
|
u16 reset_gpio;
|
|
int (*power_on)(void * data);
|
|
int (*power_off)(void * data);
|
|
};
|
|
|
|
struct omap_usb_config {
|
|
/* Configure drivers according to the connectors on your board:
|
|
* - "A" connector (rectagular)
|
|
* ... for host/OHCI use, set "register_host".
|
|
* - "B" connector (squarish) or "Mini-B"
|
|
* ... for device/gadget use, set "register_dev".
|
|
* - "Mini-AB" connector (very similar to Mini-B)
|
|
* ... for OTG use as device OR host, initialize "otg"
|
|
*/
|
|
unsigned register_host:1;
|
|
unsigned register_dev:1;
|
|
u8 otg; /* port number, 1-based: usb1 == 2 */
|
|
|
|
u8 hmc_mode;
|
|
|
|
/* implicitly true if otg: host supports remote wakeup? */
|
|
u8 rwc;
|
|
|
|
/* signaling pins used to talk to transceiver on usbN:
|
|
* 0 == usbN unused
|
|
* 2 == usb0-only, using internal transceiver
|
|
* 3 == 3 wire bidirectional
|
|
* 4 == 4 wire bidirectional
|
|
* 6 == 6 wire unidirectional (or TLL)
|
|
*/
|
|
u8 pins[3];
|
|
};
|
|
|
|
struct omap_lcd_config {
|
|
char panel_name[16];
|
|
char ctrl_name[16];
|
|
s16 nreset_gpio;
|
|
u8 data_lines;
|
|
};
|
|
|
|
struct device;
|
|
struct fb_info;
|
|
struct omap_backlight_config {
|
|
int default_intensity;
|
|
int (*set_power)(struct device *dev, int state);
|
|
int (*check_fb)(struct fb_info *fb);
|
|
};
|
|
|
|
struct omap_fbmem_config {
|
|
u32 start;
|
|
u32 size;
|
|
};
|
|
|
|
struct omap_pwm_led_platform_data {
|
|
const char *name;
|
|
int intensity_timer;
|
|
int blink_timer;
|
|
void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
|
|
};
|
|
|
|
/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
|
|
struct omap_gpio_switch_config {
|
|
char name[12];
|
|
u16 gpio;
|
|
int flags:4;
|
|
int type:4;
|
|
int key_code:24; /* Linux key code */
|
|
};
|
|
|
|
struct omap_uart_config {
|
|
/* Bit field of UARTs present; bit 0 --> UART1 */
|
|
unsigned int enabled_uarts;
|
|
};
|
|
|
|
|
|
struct omap_flash_part_config {
|
|
char part_table[0];
|
|
};
|
|
|
|
struct omap_boot_reason_config {
|
|
char reason_str[12];
|
|
};
|
|
|
|
struct omap_version_config {
|
|
char component[12];
|
|
char version[12];
|
|
};
|
|
|
|
struct omap_board_config_entry {
|
|
u16 tag;
|
|
u16 len;
|
|
u8 data[0];
|
|
};
|
|
|
|
struct omap_board_config_kernel {
|
|
u16 tag;
|
|
const void *data;
|
|
};
|
|
|
|
extern const void *__omap_get_config(u16 tag, size_t len, int nr);
|
|
|
|
#define omap_get_config(tag, type) \
|
|
((const type *) __omap_get_config((tag), sizeof(type), 0))
|
|
#define omap_get_nr_config(tag, type, nr) \
|
|
((const type *) __omap_get_config((tag), sizeof(type), (nr)))
|
|
|
|
extern const void *omap_get_var_config(u16 tag, size_t *len);
|
|
|
|
extern struct omap_board_config_kernel *omap_board_config;
|
|
extern int omap_board_config_size;
|
|
|
|
|
|
/* for TI reference platforms sharing the same debug card */
|
|
extern int debug_card_init(u32 addr, unsigned gpio);
|
|
|
|
#endif
|