kernel-ark/Documentation/ABI/testing/sysfs-c2port
Rodolfo Giometti 4e17e1db96 Add c2 port support
C2port implements a two wire serial communication protocol (bit
banging) designed to enable in-system programming, debugging, and
boundary-scan testing on low pin-count Silicon Labs devices.

Currently this code supports only flash programming through sysfs
interface but extensions shoud be easy to add.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 17:17:18 -08:00

89 lines
2.9 KiB
Plaintext

What: /sys/class/c2port/
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/ directory will contain files and
directories that will provide a unified interface to
the C2 port interface.
What: /sys/class/c2port/c2portX
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/ directory is related to X-th
C2 port into the system. Each directory will contain files to
manage and control its C2 port.
What: /sys/class/c2port/c2portX/access
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/access file enable the access
to the C2 port from the system. No commands can be sent
till this entry is set to 0.
What: /sys/class/c2port/c2portX/dev_id
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/dev_id file show the device ID
of the connected micro.
What: /sys/class/c2port/c2portX/flash_access
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/flash_access file enable the
access to the on-board flash of the connected micro.
No commands can be sent till this entry is set to 0.
What: /sys/class/c2port/c2portX/flash_block_size
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/flash_block_size file show
the on-board flash block size of the connected micro.
What: /sys/class/c2port/c2portX/flash_blocks_num
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/flash_blocks_num file show
the on-board flash blocks number of the connected micro.
What: /sys/class/c2port/c2portX/flash_data
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/flash_data file export
the content of the on-board flash of the connected micro.
What: /sys/class/c2port/c2portX/flash_erase
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/flash_erase file execute
the "erase" command on the on-board flash of the connected
micro.
What: /sys/class/c2port/c2portX/flash_erase
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/flash_erase file show the
on-board flash size of the connected micro.
What: /sys/class/c2port/c2portX/reset
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/reset file execute a "reset"
command on the connected micro.
What: /sys/class/c2port/c2portX/rev_id
Date: October 2008
Contact: Rodolfo Giometti <giometti@linux.it>
Description:
The /sys/class/c2port/c2portX/rev_id file show the revision ID
of the connected micro.