4e9daaca8d
Use gpio_request_one() instead of multiple gpiolib calls. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
1066 lines
30 KiB
C
1066 lines
30 KiB
C
/**
|
|
* omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
|
|
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 of
|
|
* the License as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/gpio.h>
|
|
#include <plat/usb.h>
|
|
|
|
#define USBHS_DRIVER_NAME "usbhs-omap"
|
|
#define OMAP_EHCI_DEVICE "ehci-omap"
|
|
#define OMAP_OHCI_DEVICE "ohci-omap3"
|
|
|
|
/* OMAP USBHOST Register addresses */
|
|
|
|
/* TLL Register Set */
|
|
#define OMAP_USBTLL_REVISION (0x00)
|
|
#define OMAP_USBTLL_SYSCONFIG (0x10)
|
|
#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
|
|
#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
|
|
#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
|
|
#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
|
|
#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
|
|
|
|
#define OMAP_USBTLL_SYSSTATUS (0x14)
|
|
#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
|
|
|
|
#define OMAP_USBTLL_IRQSTATUS (0x18)
|
|
#define OMAP_USBTLL_IRQENABLE (0x1C)
|
|
|
|
#define OMAP_TLL_SHARED_CONF (0x30)
|
|
#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
|
|
#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
|
|
#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
|
|
#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
|
|
#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
|
|
|
|
#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
|
|
#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24
|
|
#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
|
|
#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
|
|
#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
|
|
#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
|
|
#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1)
|
|
#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
|
|
|
|
#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0
|
|
#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1
|
|
#define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2
|
|
#define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3
|
|
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4
|
|
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5
|
|
#define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6
|
|
#define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7
|
|
#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA
|
|
#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB
|
|
|
|
#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
|
|
#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
|
|
|
|
#define OMAP_TLL_CHANNEL_COUNT 3
|
|
#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0)
|
|
#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1)
|
|
#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2)
|
|
|
|
/* UHH Register Set */
|
|
#define OMAP_UHH_REVISION (0x00)
|
|
#define OMAP_UHH_SYSCONFIG (0x10)
|
|
#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
|
|
#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
|
|
#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
|
|
#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
|
|
#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
|
|
#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
|
|
|
|
#define OMAP_UHH_SYSSTATUS (0x14)
|
|
#define OMAP_UHH_HOSTCONFIG (0x40)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
|
|
#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
|
|
#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
|
|
#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
|
|
#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
|
|
#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
|
|
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
|
|
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
|
|
#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31)
|
|
|
|
/* OMAP4-specific defines */
|
|
#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
|
|
#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
|
|
#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
|
|
#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
|
|
#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
|
|
|
|
#define OMAP4_P1_MODE_CLEAR (3 << 16)
|
|
#define OMAP4_P1_MODE_TLL (1 << 16)
|
|
#define OMAP4_P1_MODE_HSIC (3 << 16)
|
|
#define OMAP4_P2_MODE_CLEAR (3 << 18)
|
|
#define OMAP4_P2_MODE_TLL (1 << 18)
|
|
#define OMAP4_P2_MODE_HSIC (3 << 18)
|
|
|
|
#define OMAP_REV2_TLL_CHANNEL_COUNT 2
|
|
|
|
#define OMAP_UHH_DEBUG_CSR (0x44)
|
|
|
|
/* Values of UHH_REVISION - Note: these are not given in the TRM */
|
|
#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */
|
|
#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */
|
|
|
|
#define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1)
|
|
#define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2)
|
|
|
|
#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY)
|
|
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
|
|
#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
|
|
|
|
|
|
struct usbhs_hcd_omap {
|
|
struct clk *usbhost_ick;
|
|
struct clk *usbhost_hs_fck;
|
|
struct clk *usbhost_fs_fck;
|
|
struct clk *xclk60mhsp1_ck;
|
|
struct clk *xclk60mhsp2_ck;
|
|
struct clk *utmi_p1_fck;
|
|
struct clk *usbhost_p1_fck;
|
|
struct clk *usbtll_p1_fck;
|
|
struct clk *utmi_p2_fck;
|
|
struct clk *usbhost_p2_fck;
|
|
struct clk *usbtll_p2_fck;
|
|
struct clk *init_60m_fclk;
|
|
struct clk *usbtll_fck;
|
|
struct clk *usbtll_ick;
|
|
|
|
void __iomem *uhh_base;
|
|
void __iomem *tll_base;
|
|
|
|
struct usbhs_omap_platform_data platdata;
|
|
|
|
u32 usbhs_rev;
|
|
spinlock_t lock;
|
|
int count;
|
|
};
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
|
|
static u64 usbhs_dmamask = ~(u32)0;
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
|
|
{
|
|
__raw_writel(val, base + reg);
|
|
}
|
|
|
|
static inline u32 usbhs_read(void __iomem *base, u32 reg)
|
|
{
|
|
return __raw_readl(base + reg);
|
|
}
|
|
|
|
static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
|
|
{
|
|
__raw_writeb(val, base + reg);
|
|
}
|
|
|
|
static inline u8 usbhs_readb(void __iomem *base, u8 reg)
|
|
{
|
|
return __raw_readb(base + reg);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct platform_device *omap_usbhs_alloc_child(const char *name,
|
|
struct resource *res, int num_resources, void *pdata,
|
|
size_t pdata_size, struct device *dev)
|
|
{
|
|
struct platform_device *child;
|
|
int ret;
|
|
|
|
child = platform_device_alloc(name, 0);
|
|
|
|
if (!child) {
|
|
dev_err(dev, "platform_device_alloc %s failed\n", name);
|
|
goto err_end;
|
|
}
|
|
|
|
ret = platform_device_add_resources(child, res, num_resources);
|
|
if (ret) {
|
|
dev_err(dev, "platform_device_add_resources failed\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
ret = platform_device_add_data(child, pdata, pdata_size);
|
|
if (ret) {
|
|
dev_err(dev, "platform_device_add_data failed\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
child->dev.dma_mask = &usbhs_dmamask;
|
|
child->dev.coherent_dma_mask = 0xffffffff;
|
|
child->dev.parent = dev;
|
|
|
|
ret = platform_device_add(child);
|
|
if (ret) {
|
|
dev_err(dev, "platform_device_add failed\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
return child;
|
|
|
|
err_alloc:
|
|
platform_device_put(child);
|
|
|
|
err_end:
|
|
return NULL;
|
|
}
|
|
|
|
static int omap_usbhs_alloc_children(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct usbhs_hcd_omap *omap;
|
|
struct ehci_hcd_omap_platform_data *ehci_data;
|
|
struct ohci_hcd_omap_platform_data *ohci_data;
|
|
struct platform_device *ehci;
|
|
struct platform_device *ohci;
|
|
struct resource *res;
|
|
struct resource resources[2];
|
|
int ret;
|
|
|
|
omap = platform_get_drvdata(pdev);
|
|
ehci_data = omap->platdata.ehci_data;
|
|
ohci_data = omap->platdata.ohci_data;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
|
|
if (!res) {
|
|
dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
|
|
ret = -ENODEV;
|
|
goto err_end;
|
|
}
|
|
resources[0] = *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
|
|
if (!res) {
|
|
dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
|
|
ret = -ENODEV;
|
|
goto err_end;
|
|
}
|
|
resources[1] = *res;
|
|
|
|
ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
|
|
sizeof(*ehci_data), dev);
|
|
|
|
if (!ehci) {
|
|
dev_err(dev, "omap_usbhs_alloc_child failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_end;
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
|
|
if (!res) {
|
|
dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
|
|
ret = -ENODEV;
|
|
goto err_ehci;
|
|
}
|
|
resources[0] = *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
|
|
if (!res) {
|
|
dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
|
|
ret = -ENODEV;
|
|
goto err_ehci;
|
|
}
|
|
resources[1] = *res;
|
|
|
|
ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
|
|
sizeof(*ohci_data), dev);
|
|
if (!ohci) {
|
|
dev_err(dev, "omap_usbhs_alloc_child failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_ehci;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_ehci:
|
|
platform_device_unregister(ehci);
|
|
|
|
err_end:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* usbhs_omap_probe - initialize TI-based HCDs
|
|
*
|
|
* Allocates basic resources for this USB host controller.
|
|
*/
|
|
static int __devinit usbhs_omap_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct usbhs_omap_platform_data *pdata = dev->platform_data;
|
|
struct usbhs_hcd_omap *omap;
|
|
struct resource *res;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
if (!pdata) {
|
|
dev_err(dev, "Missing platform data\n");
|
|
ret = -ENOMEM;
|
|
goto end_probe;
|
|
}
|
|
|
|
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
|
|
if (!omap) {
|
|
dev_err(dev, "Memory allocation failed\n");
|
|
ret = -ENOMEM;
|
|
goto end_probe;
|
|
}
|
|
|
|
spin_lock_init(&omap->lock);
|
|
|
|
for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
|
|
omap->platdata.port_mode[i] = pdata->port_mode[i];
|
|
|
|
omap->platdata.ehci_data = pdata->ehci_data;
|
|
omap->platdata.ohci_data = pdata->ohci_data;
|
|
|
|
omap->usbhost_ick = clk_get(dev, "usbhost_ick");
|
|
if (IS_ERR(omap->usbhost_ick)) {
|
|
ret = PTR_ERR(omap->usbhost_ick);
|
|
dev_err(dev, "usbhost_ick failed error:%d\n", ret);
|
|
goto err_end;
|
|
}
|
|
|
|
omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
|
|
if (IS_ERR(omap->usbhost_hs_fck)) {
|
|
ret = PTR_ERR(omap->usbhost_hs_fck);
|
|
dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
|
|
goto err_usbhost_ick;
|
|
}
|
|
|
|
omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
|
|
if (IS_ERR(omap->usbhost_fs_fck)) {
|
|
ret = PTR_ERR(omap->usbhost_fs_fck);
|
|
dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
|
|
goto err_usbhost_hs_fck;
|
|
}
|
|
|
|
omap->usbtll_fck = clk_get(dev, "usbtll_fck");
|
|
if (IS_ERR(omap->usbtll_fck)) {
|
|
ret = PTR_ERR(omap->usbtll_fck);
|
|
dev_err(dev, "usbtll_fck failed error:%d\n", ret);
|
|
goto err_usbhost_fs_fck;
|
|
}
|
|
|
|
omap->usbtll_ick = clk_get(dev, "usbtll_ick");
|
|
if (IS_ERR(omap->usbtll_ick)) {
|
|
ret = PTR_ERR(omap->usbtll_ick);
|
|
dev_err(dev, "usbtll_ick failed error:%d\n", ret);
|
|
goto err_usbtll_fck;
|
|
}
|
|
|
|
omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
|
|
if (IS_ERR(omap->utmi_p1_fck)) {
|
|
ret = PTR_ERR(omap->utmi_p1_fck);
|
|
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
|
|
goto err_usbtll_ick;
|
|
}
|
|
|
|
omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
|
|
if (IS_ERR(omap->xclk60mhsp1_ck)) {
|
|
ret = PTR_ERR(omap->xclk60mhsp1_ck);
|
|
dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
|
|
goto err_utmi_p1_fck;
|
|
}
|
|
|
|
omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
|
|
if (IS_ERR(omap->utmi_p2_fck)) {
|
|
ret = PTR_ERR(omap->utmi_p2_fck);
|
|
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
|
|
goto err_xclk60mhsp1_ck;
|
|
}
|
|
|
|
omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
|
|
if (IS_ERR(omap->xclk60mhsp2_ck)) {
|
|
ret = PTR_ERR(omap->xclk60mhsp2_ck);
|
|
dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
|
|
goto err_utmi_p2_fck;
|
|
}
|
|
|
|
omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
|
|
if (IS_ERR(omap->usbhost_p1_fck)) {
|
|
ret = PTR_ERR(omap->usbhost_p1_fck);
|
|
dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
|
|
goto err_xclk60mhsp2_ck;
|
|
}
|
|
|
|
omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
|
|
if (IS_ERR(omap->usbtll_p1_fck)) {
|
|
ret = PTR_ERR(omap->usbtll_p1_fck);
|
|
dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
|
|
goto err_usbhost_p1_fck;
|
|
}
|
|
|
|
omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
|
|
if (IS_ERR(omap->usbhost_p2_fck)) {
|
|
ret = PTR_ERR(omap->usbhost_p2_fck);
|
|
dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
|
|
goto err_usbtll_p1_fck;
|
|
}
|
|
|
|
omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
|
|
if (IS_ERR(omap->usbtll_p2_fck)) {
|
|
ret = PTR_ERR(omap->usbtll_p2_fck);
|
|
dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
|
|
goto err_usbhost_p2_fck;
|
|
}
|
|
|
|
omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
|
|
if (IS_ERR(omap->init_60m_fclk)) {
|
|
ret = PTR_ERR(omap->init_60m_fclk);
|
|
dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
|
|
goto err_usbtll_p2_fck;
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
|
|
if (!res) {
|
|
dev_err(dev, "UHH EHCI get resource failed\n");
|
|
ret = -ENODEV;
|
|
goto err_init_60m_fclk;
|
|
}
|
|
|
|
omap->uhh_base = ioremap(res->start, resource_size(res));
|
|
if (!omap->uhh_base) {
|
|
dev_err(dev, "UHH ioremap failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_init_60m_fclk;
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
|
|
if (!res) {
|
|
dev_err(dev, "UHH EHCI get resource failed\n");
|
|
ret = -ENODEV;
|
|
goto err_tll;
|
|
}
|
|
|
|
omap->tll_base = ioremap(res->start, resource_size(res));
|
|
if (!omap->tll_base) {
|
|
dev_err(dev, "TLL ioremap failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_tll;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, omap);
|
|
|
|
ret = omap_usbhs_alloc_children(pdev);
|
|
if (ret) {
|
|
dev_err(dev, "omap_usbhs_alloc_children failed\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
goto end_probe;
|
|
|
|
err_alloc:
|
|
iounmap(omap->tll_base);
|
|
|
|
err_tll:
|
|
iounmap(omap->uhh_base);
|
|
|
|
err_init_60m_fclk:
|
|
clk_put(omap->init_60m_fclk);
|
|
|
|
err_usbtll_p2_fck:
|
|
clk_put(omap->usbtll_p2_fck);
|
|
|
|
err_usbhost_p2_fck:
|
|
clk_put(omap->usbhost_p2_fck);
|
|
|
|
err_usbtll_p1_fck:
|
|
clk_put(omap->usbtll_p1_fck);
|
|
|
|
err_usbhost_p1_fck:
|
|
clk_put(omap->usbhost_p1_fck);
|
|
|
|
err_xclk60mhsp2_ck:
|
|
clk_put(omap->xclk60mhsp2_ck);
|
|
|
|
err_utmi_p2_fck:
|
|
clk_put(omap->utmi_p2_fck);
|
|
|
|
err_xclk60mhsp1_ck:
|
|
clk_put(omap->xclk60mhsp1_ck);
|
|
|
|
err_utmi_p1_fck:
|
|
clk_put(omap->utmi_p1_fck);
|
|
|
|
err_usbtll_ick:
|
|
clk_put(omap->usbtll_ick);
|
|
|
|
err_usbtll_fck:
|
|
clk_put(omap->usbtll_fck);
|
|
|
|
err_usbhost_fs_fck:
|
|
clk_put(omap->usbhost_fs_fck);
|
|
|
|
err_usbhost_hs_fck:
|
|
clk_put(omap->usbhost_hs_fck);
|
|
|
|
err_usbhost_ick:
|
|
clk_put(omap->usbhost_ick);
|
|
|
|
err_end:
|
|
kfree(omap);
|
|
|
|
end_probe:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
|
|
* @pdev: USB Host Controller being removed
|
|
*
|
|
* Reverses the effect of usbhs_omap_probe().
|
|
*/
|
|
static int __devexit usbhs_omap_remove(struct platform_device *pdev)
|
|
{
|
|
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
|
|
|
|
if (omap->count != 0) {
|
|
dev_err(&pdev->dev,
|
|
"Either EHCI or OHCI is still using usbhs core\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
iounmap(omap->tll_base);
|
|
iounmap(omap->uhh_base);
|
|
clk_put(omap->init_60m_fclk);
|
|
clk_put(omap->usbtll_p2_fck);
|
|
clk_put(omap->usbhost_p2_fck);
|
|
clk_put(omap->usbtll_p1_fck);
|
|
clk_put(omap->usbhost_p1_fck);
|
|
clk_put(omap->xclk60mhsp2_ck);
|
|
clk_put(omap->utmi_p2_fck);
|
|
clk_put(omap->xclk60mhsp1_ck);
|
|
clk_put(omap->utmi_p1_fck);
|
|
clk_put(omap->usbtll_ick);
|
|
clk_put(omap->usbtll_fck);
|
|
clk_put(omap->usbhost_fs_fck);
|
|
clk_put(omap->usbhost_hs_fck);
|
|
clk_put(omap->usbhost_ick);
|
|
kfree(omap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
|
|
{
|
|
switch (pmode) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
return true;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* convert the port-mode enum to a value we can use in the FSLSMODE
|
|
* field of USBTLL_CHANNEL_CONF
|
|
*/
|
|
static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
|
|
{
|
|
switch (mode) {
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
|
|
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
|
|
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
return OMAP_TLL_FSLSMODE_3PIN_PHY;
|
|
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
return OMAP_TLL_FSLSMODE_4PIN_PHY;
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
return OMAP_TLL_FSLSMODE_3PIN_TLL;
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
return OMAP_TLL_FSLSMODE_4PIN_TLL;
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
|
|
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
|
|
default:
|
|
pr_warning("Invalid port mode, using default\n");
|
|
return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
|
|
}
|
|
}
|
|
|
|
static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
|
|
{
|
|
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
|
|
struct usbhs_omap_platform_data *pdata = dev->platform_data;
|
|
unsigned reg;
|
|
int i;
|
|
|
|
/* Program Common TLL register */
|
|
reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
|
|
reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
|
|
| OMAP_TLL_SHARED_CONF_USB_DIVRATION);
|
|
reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
|
|
reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
|
|
|
|
usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
|
|
|
|
/* Enable channels now */
|
|
for (i = 0; i < tll_channel_count; i++) {
|
|
reg = usbhs_read(omap->tll_base,
|
|
OMAP_TLL_CHANNEL_CONF(i));
|
|
|
|
if (is_ohci_port(pdata->port_mode[i])) {
|
|
reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
|
|
<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
|
|
reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
|
|
} else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {
|
|
|
|
/* Disable AutoIdle, BitStuffing and use SDR Mode */
|
|
reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
|
|
| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
|
|
| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
|
|
|
|
} else
|
|
continue;
|
|
|
|
reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
|
|
usbhs_write(omap->tll_base,
|
|
OMAP_TLL_CHANNEL_CONF(i), reg);
|
|
|
|
usbhs_writeb(omap->tll_base,
|
|
OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
|
|
}
|
|
}
|
|
|
|
static int usbhs_enable(struct device *dev)
|
|
{
|
|
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
|
|
struct usbhs_omap_platform_data *pdata = &omap->platdata;
|
|
unsigned long flags = 0;
|
|
int ret = 0;
|
|
unsigned long timeout;
|
|
unsigned reg;
|
|
|
|
dev_dbg(dev, "starting TI HSUSB Controller\n");
|
|
if (!pdata) {
|
|
dev_dbg(dev, "missing platform_data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
spin_lock_irqsave(&omap->lock, flags);
|
|
if (omap->count > 0)
|
|
goto end_count;
|
|
|
|
clk_enable(omap->usbhost_ick);
|
|
clk_enable(omap->usbhost_hs_fck);
|
|
clk_enable(omap->usbhost_fs_fck);
|
|
clk_enable(omap->usbtll_fck);
|
|
clk_enable(omap->usbtll_ick);
|
|
|
|
if (pdata->ehci_data->phy_reset) {
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
|
|
gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
|
|
GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
|
|
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
|
|
gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
|
|
GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
|
|
|
|
/* Hold the PHY in RESET for enough time till DIR is high */
|
|
udelay(10);
|
|
}
|
|
|
|
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
|
|
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
|
|
|
|
/* perform TLL soft reset, and wait until reset is complete */
|
|
usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
|
|
OMAP_USBTLL_SYSCONFIG_SOFTRESET);
|
|
|
|
/* Wait for TLL reset to complete */
|
|
timeout = jiffies + msecs_to_jiffies(1000);
|
|
while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
|
|
& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_dbg(dev, "operation timed out\n");
|
|
ret = -EINVAL;
|
|
goto err_tll;
|
|
}
|
|
}
|
|
|
|
dev_dbg(dev, "TLL RESET DONE\n");
|
|
|
|
/* (1<<3) = no idle mode only for initial debugging */
|
|
usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
|
|
OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
|
|
OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
|
|
OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
|
|
|
|
/* Put UHH in NoIdle/NoStandby mode */
|
|
reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
|
|
if (is_omap_usbhs_rev1(omap)) {
|
|
reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
|
|
| OMAP_UHH_SYSCONFIG_SIDLEMODE
|
|
| OMAP_UHH_SYSCONFIG_CACTIVITY
|
|
| OMAP_UHH_SYSCONFIG_MIDLEMODE);
|
|
reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
|
|
|
|
|
|
} else if (is_omap_usbhs_rev2(omap)) {
|
|
reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
|
|
reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
|
|
reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
|
|
reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
|
|
}
|
|
|
|
usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
|
|
|
|
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
|
|
/* setup ULPI bypass and burst configurations */
|
|
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
|
|
| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
|
|
| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
|
|
reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
|
|
|
|
if (is_omap_usbhs_rev1(omap)) {
|
|
if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
|
|
if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
|
|
if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
|
|
|
|
/* Bypass the TLL module for PHY mode operation */
|
|
if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
|
|
dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
|
|
if (is_ehci_phy_mode(pdata->port_mode[0]) ||
|
|
is_ehci_phy_mode(pdata->port_mode[1]) ||
|
|
is_ehci_phy_mode(pdata->port_mode[2]))
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
|
|
else
|
|
reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
|
|
} else {
|
|
dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
|
|
if (is_ehci_phy_mode(pdata->port_mode[0]))
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
|
|
else
|
|
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
|
|
if (is_ehci_phy_mode(pdata->port_mode[1]))
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
|
|
else
|
|
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
|
|
if (is_ehci_phy_mode(pdata->port_mode[2]))
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
|
|
else
|
|
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
|
|
}
|
|
} else if (is_omap_usbhs_rev2(omap)) {
|
|
/* Clear port mode fields for PHY mode*/
|
|
reg &= ~OMAP4_P1_MODE_CLEAR;
|
|
reg &= ~OMAP4_P2_MODE_CLEAR;
|
|
|
|
if (is_ehci_phy_mode(pdata->port_mode[0])) {
|
|
ret = clk_set_parent(omap->utmi_p1_fck,
|
|
omap->xclk60mhsp1_ck);
|
|
if (ret != 0) {
|
|
dev_err(dev, "xclk60mhsp1_ck set parent"
|
|
"failed error:%d\n", ret);
|
|
goto err_tll;
|
|
}
|
|
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
|
|
ret = clk_set_parent(omap->utmi_p1_fck,
|
|
omap->init_60m_fclk);
|
|
if (ret != 0) {
|
|
dev_err(dev, "init_60m_fclk set parent"
|
|
"failed error:%d\n", ret);
|
|
goto err_tll;
|
|
}
|
|
clk_enable(omap->usbhost_p1_fck);
|
|
clk_enable(omap->usbtll_p1_fck);
|
|
}
|
|
|
|
if (is_ehci_phy_mode(pdata->port_mode[1])) {
|
|
ret = clk_set_parent(omap->utmi_p2_fck,
|
|
omap->xclk60mhsp2_ck);
|
|
if (ret != 0) {
|
|
dev_err(dev, "xclk60mhsp1_ck set parent"
|
|
"failed error:%d\n", ret);
|
|
goto err_tll;
|
|
}
|
|
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
|
|
ret = clk_set_parent(omap->utmi_p2_fck,
|
|
omap->init_60m_fclk);
|
|
if (ret != 0) {
|
|
dev_err(dev, "init_60m_fclk set parent"
|
|
"failed error:%d\n", ret);
|
|
goto err_tll;
|
|
}
|
|
clk_enable(omap->usbhost_p2_fck);
|
|
clk_enable(omap->usbtll_p2_fck);
|
|
}
|
|
|
|
clk_enable(omap->utmi_p1_fck);
|
|
clk_enable(omap->utmi_p2_fck);
|
|
|
|
if (is_ehci_tll_mode(pdata->port_mode[0]) ||
|
|
(is_ohci_port(pdata->port_mode[0])))
|
|
reg |= OMAP4_P1_MODE_TLL;
|
|
else if (is_ehci_hsic_mode(pdata->port_mode[0]))
|
|
reg |= OMAP4_P1_MODE_HSIC;
|
|
|
|
if (is_ehci_tll_mode(pdata->port_mode[1]) ||
|
|
(is_ohci_port(pdata->port_mode[1])))
|
|
reg |= OMAP4_P2_MODE_TLL;
|
|
else if (is_ehci_hsic_mode(pdata->port_mode[1]))
|
|
reg |= OMAP4_P2_MODE_HSIC;
|
|
}
|
|
|
|
usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
|
|
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
|
|
|
|
if (is_ehci_tll_mode(pdata->port_mode[0]) ||
|
|
is_ehci_tll_mode(pdata->port_mode[1]) ||
|
|
is_ehci_tll_mode(pdata->port_mode[2]) ||
|
|
(is_ohci_port(pdata->port_mode[0])) ||
|
|
(is_ohci_port(pdata->port_mode[1])) ||
|
|
(is_ohci_port(pdata->port_mode[2]))) {
|
|
|
|
/* Enable UTMI mode for required TLL channels */
|
|
if (is_omap_usbhs_rev2(omap))
|
|
usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
|
|
else
|
|
usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
|
|
}
|
|
|
|
if (pdata->ehci_data->phy_reset) {
|
|
/* Hold the PHY in RESET for enough time till
|
|
* PHY is settled and ready
|
|
*/
|
|
udelay(10);
|
|
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
|
|
gpio_set_value
|
|
(pdata->ehci_data->reset_gpio_port[0], 1);
|
|
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
|
|
gpio_set_value
|
|
(pdata->ehci_data->reset_gpio_port[1], 1);
|
|
}
|
|
|
|
end_count:
|
|
omap->count++;
|
|
spin_unlock_irqrestore(&omap->lock, flags);
|
|
return 0;
|
|
|
|
err_tll:
|
|
if (pdata->ehci_data->phy_reset) {
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
|
|
gpio_free(pdata->ehci_data->reset_gpio_port[0]);
|
|
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
|
|
gpio_free(pdata->ehci_data->reset_gpio_port[1]);
|
|
}
|
|
|
|
clk_disable(omap->usbtll_ick);
|
|
clk_disable(omap->usbtll_fck);
|
|
clk_disable(omap->usbhost_fs_fck);
|
|
clk_disable(omap->usbhost_hs_fck);
|
|
clk_disable(omap->usbhost_ick);
|
|
spin_unlock_irqrestore(&omap->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static void usbhs_disable(struct device *dev)
|
|
{
|
|
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
|
|
struct usbhs_omap_platform_data *pdata = &omap->platdata;
|
|
unsigned long flags = 0;
|
|
unsigned long timeout;
|
|
|
|
dev_dbg(dev, "stopping TI HSUSB Controller\n");
|
|
|
|
spin_lock_irqsave(&omap->lock, flags);
|
|
|
|
if (omap->count == 0)
|
|
goto end_disble;
|
|
|
|
omap->count--;
|
|
|
|
if (omap->count != 0)
|
|
goto end_disble;
|
|
|
|
/* Reset OMAP modules for insmod/rmmod to work */
|
|
usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
|
|
is_omap_usbhs_rev2(omap) ?
|
|
OMAP4_UHH_SYSCONFIG_SOFTRESET :
|
|
OMAP_UHH_SYSCONFIG_SOFTRESET);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
|
|
& (1 << 0))) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout))
|
|
dev_dbg(dev, "operation timed out\n");
|
|
}
|
|
|
|
while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
|
|
& (1 << 1))) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout))
|
|
dev_dbg(dev, "operation timed out\n");
|
|
}
|
|
|
|
while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
|
|
& (1 << 2))) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout))
|
|
dev_dbg(dev, "operation timed out\n");
|
|
}
|
|
|
|
usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
|
|
|
|
while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
|
|
& (1 << 0))) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout))
|
|
dev_dbg(dev, "operation timed out\n");
|
|
}
|
|
|
|
if (is_omap_usbhs_rev2(omap)) {
|
|
if (is_ehci_tll_mode(pdata->port_mode[0]))
|
|
clk_disable(omap->usbtll_p1_fck);
|
|
if (is_ehci_tll_mode(pdata->port_mode[1]))
|
|
clk_disable(omap->usbtll_p2_fck);
|
|
clk_disable(omap->utmi_p2_fck);
|
|
clk_disable(omap->utmi_p1_fck);
|
|
}
|
|
|
|
clk_disable(omap->usbtll_ick);
|
|
clk_disable(omap->usbtll_fck);
|
|
clk_disable(omap->usbhost_fs_fck);
|
|
clk_disable(omap->usbhost_hs_fck);
|
|
clk_disable(omap->usbhost_ick);
|
|
|
|
/* The gpio_free migh sleep; so unlock the spinlock */
|
|
spin_unlock_irqrestore(&omap->lock, flags);
|
|
|
|
if (pdata->ehci_data->phy_reset) {
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
|
|
gpio_free(pdata->ehci_data->reset_gpio_port[0]);
|
|
|
|
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
|
|
gpio_free(pdata->ehci_data->reset_gpio_port[1]);
|
|
}
|
|
return;
|
|
|
|
end_disble:
|
|
spin_unlock_irqrestore(&omap->lock, flags);
|
|
}
|
|
|
|
int omap_usbhs_enable(struct device *dev)
|
|
{
|
|
return usbhs_enable(dev->parent);
|
|
}
|
|
EXPORT_SYMBOL_GPL(omap_usbhs_enable);
|
|
|
|
void omap_usbhs_disable(struct device *dev)
|
|
{
|
|
usbhs_disable(dev->parent);
|
|
}
|
|
EXPORT_SYMBOL_GPL(omap_usbhs_disable);
|
|
|
|
static struct platform_driver usbhs_omap_driver = {
|
|
.driver = {
|
|
.name = (char *)usbhs_driver_name,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.remove = __exit_p(usbhs_omap_remove),
|
|
};
|
|
|
|
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
|
|
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
|
|
|
|
static int __init omap_usbhs_drvinit(void)
|
|
{
|
|
return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
|
|
}
|
|
|
|
/*
|
|
* init before ehci and ohci drivers;
|
|
* The usbhs core driver should be initialized much before
|
|
* the omap ehci and ohci probe functions are called.
|
|
*/
|
|
fs_initcall(omap_usbhs_drvinit);
|
|
|
|
static void __exit omap_usbhs_drvexit(void)
|
|
{
|
|
platform_driver_unregister(&usbhs_omap_driver);
|
|
}
|
|
module_exit(omap_usbhs_drvexit);
|