kernel-ark/arch/powerpc/kernel/pmc.c
Andy Fleming dd6c89f686 [POWERPC] Fix oprofile support for e500 in arch/powerpc
Fixed a compile error in building the 85xx support with oprofile, and in
the process cleaned up some issues with the fsl_booke performance monitor
code.

* Reorganized FSL Book-E performance monitoring code so that the 7450
  wouldn't be built if the e500 was, and cleaned it up so it was more
  self-contained.

* Added a cpu_setup function for FSL Book-E.  The original
  cpu_setup function prototype had no arguments, assuming that
  the reg_setup function would copy the required information into
  variables which represented the registers.  This was silly for
  e500, since it has 1 register per counter (rather than 3 for
  all counters), so the code has been restructured to have
  cpu_setup take the current counter config array as an argument,
  with op_powerpc_setup() invoking op_powerpc_cpu_setup() through
  on_each_cpu(), and op_powerpc_cpu_setup() invoking the
  model-specific cpu_setup function with an argument.  The
  argument is ignored on all other platforms at present.

* Fixed a confusing line where a trinary operator only had two
  arguments

Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01 14:52:48 +11:00

117 lines
2.5 KiB
C

/*
* arch/powerpc/kernel/pmc.c
*
* Copyright (C) 2004 David Gibson, IBM Corporation.
* Includes code formerly from arch/ppc/kernel/perfmon.c:
* Author: Andy Fleming
* Copyright (c) 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <asm/processor.h>
#include <asm/pmc.h>
#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200)
static void dummy_perf(struct pt_regs *regs)
{
unsigned int pmgc0 = mfpmr(PMRN_PMGC0);
pmgc0 &= ~PMGC0_PMIE;
mtpmr(PMRN_PMGC0, pmgc0);
}
#elif defined(CONFIG_PPC64) || defined(CONFIG_6xx)
#ifndef MMCR0_PMAO
#define MMCR0_PMAO 0
#endif
/* Ensure exceptions are disabled */
static void dummy_perf(struct pt_regs *regs)
{
unsigned int mmcr0 = mfspr(SPRN_MMCR0);
mmcr0 &= ~(MMCR0_PMXE|MMCR0_PMAO);
mtspr(SPRN_MMCR0, mmcr0);
}
#else
/* Ensure exceptions are disabled */
static void dummy_perf(struct pt_regs *regs)
{
unsigned int mmcr0 = mfspr(SPRN_MMCR0);
mmcr0 &= ~(MMCR0_PMXE);
mtspr(SPRN_MMCR0, mmcr0);
}
#endif
static DEFINE_SPINLOCK(pmc_owner_lock);
static void *pmc_owner_caller; /* mostly for debugging */
perf_irq_t perf_irq = dummy_perf;
int reserve_pmc_hardware(perf_irq_t new_perf_irq)
{
int err = 0;
spin_lock(&pmc_owner_lock);
if (pmc_owner_caller) {
printk(KERN_WARNING "reserve_pmc_hardware: "
"PMC hardware busy (reserved by caller %p)\n",
pmc_owner_caller);
err = -EBUSY;
goto out;
}
pmc_owner_caller = __builtin_return_address(0);
perf_irq = new_perf_irq ? new_perf_irq : dummy_perf;
out:
spin_unlock(&pmc_owner_lock);
return err;
}
EXPORT_SYMBOL_GPL(reserve_pmc_hardware);
void release_pmc_hardware(void)
{
spin_lock(&pmc_owner_lock);
WARN_ON(! pmc_owner_caller);
pmc_owner_caller = NULL;
perf_irq = dummy_perf;
spin_unlock(&pmc_owner_lock);
}
EXPORT_SYMBOL_GPL(release_pmc_hardware);
#ifdef CONFIG_PPC64
void power4_enable_pmcs(void)
{
unsigned long hid0;
hid0 = mfspr(SPRN_HID0);
hid0 |= 1UL << (63 - 20);
/* POWER4 requires the following sequence */
asm volatile(
"sync\n"
"mtspr %1, %0\n"
"mfspr %0, %1\n"
"mfspr %0, %1\n"
"mfspr %0, %1\n"
"mfspr %0, %1\n"
"mfspr %0, %1\n"
"mfspr %0, %1\n"
"isync" : "=&r" (hid0) : "i" (SPRN_HID0), "0" (hid0):
"memory");
}
#endif /* CONFIG_PPC64 */