144 lines
3.9 KiB
ArmAsm
144 lines
3.9 KiB
ArmAsm
/*
|
|
* File: arch/blackfin/mach-bf537/head.S
|
|
* Based on: arch/blackfin/mach-bf533/head.S
|
|
* Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
|
|
*
|
|
* Created: 1998
|
|
* Description: Startup code for Blackfin BF537
|
|
*
|
|
* Modified:
|
|
* Copyright 2004-2006 Analog Devices Inc.
|
|
*
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see the file COPYING, or write
|
|
* to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/blackfin.h>
|
|
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
|
#include <asm/clocks.h>
|
|
#include <mach/mem_init.h>
|
|
#endif
|
|
|
|
.section .l1.text
|
|
#ifdef CONFIG_BFIN_KERNEL_CLOCK
|
|
ENTRY(_start_dma_code)
|
|
|
|
/* Enable PHY CLK buffer output */
|
|
p0.h = hi(VR_CTL);
|
|
p0.l = lo(VR_CTL);
|
|
r0.l = w[p0];
|
|
bitset(r0, 14);
|
|
w[p0] = r0.l;
|
|
ssync;
|
|
|
|
p0.h = hi(SIC_IWR);
|
|
p0.l = lo(SIC_IWR);
|
|
r0.l = 0x1;
|
|
r0.h = 0x0;
|
|
[p0] = r0;
|
|
SSYNC;
|
|
|
|
/*
|
|
* Set PLL_CTL
|
|
* - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
|
|
* - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
|
|
* - [7] = output delay (add 200ps of delay to mem signals)
|
|
* - [6] = input delay (add 200ps of input delay to mem signals)
|
|
* - [5] = PDWN : 1=All Clocks off
|
|
* - [3] = STOPCK : 1=Core Clock off
|
|
* - [1] = PLL_OFF : 1=Disable Power to PLL
|
|
* - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
|
|
* all other bits set to zero
|
|
*/
|
|
|
|
p0.h = hi(PLL_LOCKCNT);
|
|
p0.l = lo(PLL_LOCKCNT);
|
|
r0 = 0x300(Z);
|
|
w[p0] = r0.l;
|
|
ssync;
|
|
|
|
P2.H = hi(EBIU_SDGCTL);
|
|
P2.L = lo(EBIU_SDGCTL);
|
|
R0 = [P2];
|
|
BITSET (R0, 24);
|
|
[P2] = R0;
|
|
SSYNC;
|
|
|
|
r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
|
|
r0 = r0 << 9; /* Shift it over, */
|
|
r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
|
|
r0 = r1 | r0;
|
|
r1 = PLL_BYPASS; /* Bypass the PLL? */
|
|
r1 = r1 << 8; /* Shift it over */
|
|
r0 = r1 | r0; /* add them all together */
|
|
|
|
p0.h = hi(PLL_CTL);
|
|
p0.l = lo(PLL_CTL); /* Load the address */
|
|
cli r2; /* Disable interrupts */
|
|
ssync;
|
|
w[p0] = r0.l; /* Set the value */
|
|
idle; /* Wait for the PLL to stablize */
|
|
sti r2; /* Enable interrupts */
|
|
|
|
.Lcheck_again:
|
|
p0.h = hi(PLL_STAT);
|
|
p0.l = lo(PLL_STAT);
|
|
R0 = W[P0](Z);
|
|
CC = BITTST(R0,5);
|
|
if ! CC jump .Lcheck_again;
|
|
|
|
/* Configure SCLK & CCLK Dividers */
|
|
r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
|
|
p0.h = hi(PLL_DIV);
|
|
p0.l = lo(PLL_DIV);
|
|
w[p0] = r0.l;
|
|
ssync;
|
|
|
|
p0.l = lo(EBIU_SDRRC);
|
|
p0.h = hi(EBIU_SDRRC);
|
|
r0 = mem_SDRRC;
|
|
w[p0] = r0.l;
|
|
ssync;
|
|
|
|
P2.H = hi(EBIU_SDGCTL);
|
|
P2.L = lo(EBIU_SDGCTL);
|
|
R0 = [P2];
|
|
BITCLR (R0, 24);
|
|
p0.h = hi(EBIU_SDSTAT);
|
|
p0.l = lo(EBIU_SDSTAT);
|
|
r2.l = w[p0];
|
|
cc = bittst(r2,3);
|
|
if !cc jump .Lskip;
|
|
NOP;
|
|
BITSET (R0, 23);
|
|
.Lskip:
|
|
[P2] = R0;
|
|
SSYNC;
|
|
|
|
R0.L = lo(mem_SDGCTL);
|
|
R0.H = hi(mem_SDGCTL);
|
|
R1 = [p2];
|
|
R1 = R1 | R0;
|
|
[P2] = R1;
|
|
SSYNC;
|
|
|
|
RTS;
|
|
ENDPROC(_start_dma_code)
|
|
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
|