kernel-ark/drivers/usb/host/sl811_cs.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

328 lines
8.2 KiB
C

/*
* PCMCIA driver for SL811HS (as found in REX-CFU1U)
* Filename: sl811_cs.c
* Author: Yukio Yamamoto
*
* Port to sl811-hcd and 2.6.x by
* Botond Botyanszki <boti@rocketmail.com>
* Simon Pickering
*
* Last update: 2005-05-12
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#include <linux/usb/sl811.h>
MODULE_AUTHOR("Botond Botyanszki");
MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6");
MODULE_LICENSE("GPL");
/*====================================================================*/
/* MACROS */
/*====================================================================*/
#if defined(DEBUG) || defined(PCMCIA_DEBUG)
static int pc_debug = 0;
module_param(pc_debug, int, 0644);
#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args)
#else
#define DBG(n, args...) do{}while(0)
#endif /* no debugging */
#define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444)
#define CS_CHECK(fn, ret) \
do { \
last_fn = (fn); \
if ((last_ret = (ret)) != 0) \
goto cs_failed; \
} while (0)
/*====================================================================*/
/* VARIABLES */
/*====================================================================*/
static const char driver_name[DEV_NAME_LEN] = "sl811_cs";
typedef struct local_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
} local_info_t;
static void sl811_cs_release(struct pcmcia_device * link);
/*====================================================================*/
static void release_platform_dev(struct device * dev)
{
DBG(0, "sl811_cs platform_dev release\n");
dev->parent = NULL;
}
static struct sl811_platform_data platform_data = {
.potpg = 100,
.power = 50, /* == 100mA */
// .reset = ... FIXME: invoke CF reset on the card
};
static struct resource resources[] = {
[0] = {
.flags = IORESOURCE_IRQ,
},
[1] = {
// .name = "address",
.flags = IORESOURCE_IO,
},
[2] = {
// .name = "data",
.flags = IORESOURCE_IO,
},
};
extern struct platform_driver sl811h_driver;
static struct platform_device platform_dev = {
.id = -1,
.dev = {
.platform_data = &platform_data,
.release = release_platform_dev,
},
.resource = resources,
.num_resources = ARRAY_SIZE(resources),
};
static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
{
if (platform_dev.dev.parent)
return -EBUSY;
platform_dev.dev.parent = parent;
/* finish seting up the platform device */
resources[0].start = irq;
resources[1].start = base_addr;
resources[1].end = base_addr;
resources[2].start = base_addr + 1;
resources[2].end = base_addr + 1;
/* The driver core will probe for us. We know sl811-hcd has been
* initialized already because of the link order dependency created
* by referencing "sl811h_driver".
*/
platform_dev.name = sl811h_driver.driver.name;
return platform_device_register(&platform_dev);
}
/*====================================================================*/
static void sl811_cs_detach(struct pcmcia_device *link)
{
DBG(0, "sl811_cs_detach(0x%p)\n", link);
sl811_cs_release(link);
/* This points to the parent local_info_t struct */
kfree(link->priv);
}
static void sl811_cs_release(struct pcmcia_device * link)
{
DBG(0, "sl811_cs_release(0x%p)\n", link);
pcmcia_disable_device(link);
platform_device_unregister(&platform_dev);
}
static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &handle_to_dev(link);
local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_fn, last_ret;
u_char buf[64];
config_info_t conf;
cistpl_cftable_entry_t dflt = { 0 };
DBG(0, "sl811_cs_config(0x%p)\n", link);
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(link, &conf));
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
if (pcmcia_get_tuple_data(link, &tuple) != 0
|| pcmcia_parse_tuple(link, &tuple, &parse)
!= 0)
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
dflt = *cfg;
}
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
!= conf.Vcc)
goto next_entry;
} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
!= conf.Vcc)
goto next_entry;
}
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* we need an interrupt */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
}
break;
next_entry:
pcmcia_disable_device(link);
last_ret = pcmcia_get_next_tuple(link, &tuple);
}
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
goto cs_failed;
if (link->conf.Attributes & CONF_ENABLE_IRQ)
CS_CHECK(RequestIRQ,
pcmcia_request_irq(link, &link->irq));
else
goto cs_failed;
CS_CHECK(RequestConfiguration,
pcmcia_request_configuration(link, &link->conf));
sprintf(dev->node.dev_name, driver_name);
dev->node.major = dev->node.minor = 0;
link->dev_node = &dev->node;
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq.AssignedIRQ);
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
printk("\n");
if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
< 0) {
cs_failed:
printk("sl811_cs_config failed\n");
cs_error(link, last_fn, last_ret);
sl811_cs_release(link);
return -ENODEV;
}
return 0;
}
static int sl811_cs_probe(struct pcmcia_device *link)
{
local_info_t *local;
local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local)
return -ENOMEM;
memset(local, 0, sizeof(local_info_t));
local->p_dev = link;
link->priv = local;
/* Initialize */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
link->irq.Handler = NULL;
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
return sl811_cs_config(link);
}
static struct pcmcia_device_id sl811_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0xc015, 0x0001), /* RATOC USB HOST CF+ Card */
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, sl811_ids);
static struct pcmcia_driver sl811_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = (char *)driver_name,
},
.probe = sl811_cs_probe,
.remove = sl811_cs_detach,
.id_table = sl811_ids,
};
/*====================================================================*/
static int __init init_sl811_cs(void)
{
return pcmcia_register_driver(&sl811_cs_driver);
}
module_init(init_sl811_cs);
static void __exit exit_sl811_cs(void)
{
pcmcia_unregister_driver(&sl811_cs_driver);
}
module_exit(exit_sl811_cs);