kernel-ark/arch/ppc64/kernel/irq.c
Stephen Rothwell 0bc0ffd5f0 [PATCH] ppc64 iSeries: remove LparData.h
include/asm-ppc64/iSeries/LparData.h just included a whole lot of other files
to declare variables that would be better declared in those other files.  So,
remove it.  This will reduce that number of things needed to be included in
most cases to access the relevant variables.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:27 -07:00

520 lines
12 KiB
C

/*
* arch/ppc/kernel/irq.c
*
* Derived from arch/i386/kernel/irq.c
* Copyright (C) 1992 Linus Torvalds
* Adapted from arch/i386 by Gary Thomas
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Updated and modified by Cort Dougan (cort@cs.nmt.edu)
* Copyright (C) 1996 Cort Dougan
* Adapted for Power Macintosh by Paul Mackerras
* Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
* Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* This file contains the code used by various IRQ handling routines:
* asking for different IRQ's should be done through these routines
* instead of just grabbing them. Thus setups with different IRQ numbers
* shouldn't result in any weird surprises, and installing new handlers
* should be easier.
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/threads.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/proc_fs.h>
#include <linux/random.h>
#include <linux/kallsyms.h>
#include <linux/profile.h>
#include <linux/bitops.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/cache.h>
#include <asm/prom.h>
#include <asm/ptrace.h>
#include <asm/iSeries/ItLpQueue.h>
#include <asm/machdep.h>
#include <asm/paca.h>
#ifdef CONFIG_SMP
extern void iSeries_smp_message_recv( struct pt_regs * );
#endif
extern irq_desc_t irq_desc[NR_IRQS];
EXPORT_SYMBOL(irq_desc);
int distribute_irqs = 1;
int __irq_offset_value;
int ppc_spurious_interrupts;
unsigned long lpevent_count;
u64 ppc64_interrupt_controller;
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
struct irqaction * action;
irq_desc_t *desc;
unsigned long flags;
if (i == 0) {
seq_printf(p, " ");
for (j=0; j<NR_CPUS; j++) {
if (cpu_online(j))
seq_printf(p, "CPU%d ",j);
}
seq_putc(p, '\n');
}
if (i < NR_IRQS) {
desc = get_irq_desc(i);
spin_lock_irqsave(&desc->lock, flags);
action = desc->action;
if (!action || !action->handler)
goto skip;
seq_printf(p, "%3d: ", i);
#ifdef CONFIG_SMP
for (j = 0; j < NR_CPUS; j++) {
if (cpu_online(j))
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
}
#else
seq_printf(p, "%10u ", kstat_irqs(i));
#endif /* CONFIG_SMP */
if (desc->handler)
seq_printf(p, " %s ", desc->handler->typename );
else
seq_printf(p, " None ");
seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge ");
seq_printf(p, " %s",action->name);
for (action=action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&desc->lock, flags);
} else if (i == NR_IRQS)
seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(cpumask_t map)
{
unsigned int irq;
static int warned;
for_each_irq(irq) {
cpumask_t mask;
if (irq_desc[irq].status & IRQ_PER_CPU)
continue;
cpus_and(mask, irq_affinity[irq], map);
if (any_online_cpu(mask) == NR_CPUS) {
printk("Breaking affinity for irq %i\n", irq);
mask = map;
}
if (irq_desc[irq].handler->set_affinity)
irq_desc[irq].handler->set_affinity(irq, mask);
else if (irq_desc[irq].action && !(warned++))
printk("Cannot set affinity for irq %i\n", irq);
}
local_irq_enable();
mdelay(1);
local_irq_disable();
}
#endif
extern int noirqdebug;
/*
* Eventually, this should take an array of interrupts and an array size
* so it can dispatch multiple interrupts.
*/
void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
{
int status;
struct irqaction *action;
int cpu = smp_processor_id();
irq_desc_t *desc = get_irq_desc(irq);
irqreturn_t action_ret;
#ifdef CONFIG_IRQSTACKS
struct thread_info *curtp, *irqtp;
#endif
kstat_cpu(cpu).irqs[irq]++;
if (desc->status & IRQ_PER_CPU) {
/* no locking required for CPU-local interrupts: */
ack_irq(irq);
action_ret = handle_IRQ_event(irq, regs, desc->action);
desc->handler->end(irq);
return;
}
spin_lock(&desc->lock);
ack_irq(irq);
/*
REPLAY is when Linux resends an IRQ that was dropped earlier
WAITING is used by probe to mark irqs that are being tested
*/
status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
status |= IRQ_PENDING; /* we _want_ to handle it */
/*
* If the IRQ is disabled for whatever reason, we cannot
* use the action we have.
*/
action = NULL;
if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
action = desc->action;
if (!action || !action->handler) {
ppc_spurious_interrupts++;
printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq);
/* We can't call disable_irq here, it would deadlock */
if (!desc->depth)
desc->depth = 1;
desc->status |= IRQ_DISABLED;
/* This is not a real spurrious interrupt, we
* have to eoi it, so we jump to out
*/
mask_irq(irq);
goto out;
}
status &= ~IRQ_PENDING; /* we commit to handling */
status |= IRQ_INPROGRESS; /* we are handling it */
}
desc->status = status;
/*
* If there is no IRQ handler or it was disabled, exit early.
Since we set PENDING, if another processor is handling
a different instance of this same irq, the other processor
will take care of it.
*/
if (unlikely(!action))
goto out;
/*
* Edge triggered interrupts need to remember
* pending events.
* This applies to any hw interrupts that allow a second
* instance of the same irq to arrive while we are in do_IRQ
* or in the handler. But the code here only handles the _second_
* instance of the irq, not the third or fourth. So it is mostly
* useful for irq hardware that does not mask cleanly in an
* SMP environment.
*/
for (;;) {
spin_unlock(&desc->lock);
#ifdef CONFIG_IRQSTACKS
/* Switch to the irq stack to handle this */
curtp = current_thread_info();
irqtp = hardirq_ctx[smp_processor_id()];
if (curtp != irqtp) {
irqtp->task = curtp->task;
irqtp->flags = 0;
action_ret = call_handle_IRQ_event(irq, regs, action, irqtp);
irqtp->task = NULL;
if (irqtp->flags)
set_bits(irqtp->flags, &curtp->flags);
} else
#endif
action_ret = handle_IRQ_event(irq, regs, action);
spin_lock(&desc->lock);
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
if (likely(!(desc->status & IRQ_PENDING)))
break;
desc->status &= ~IRQ_PENDING;
}
out:
desc->status &= ~IRQ_INPROGRESS;
/*
* The ->end() handler has to deal with interrupts which got
* disabled while the handler was running.
*/
if (desc->handler) {
if (desc->handler->end)
desc->handler->end(irq);
else if (desc->handler->enable)
desc->handler->enable(irq);
}
spin_unlock(&desc->lock);
}
#ifdef CONFIG_PPC_ISERIES
void do_IRQ(struct pt_regs *regs)
{
struct paca_struct *lpaca;
struct ItLpQueue *lpq;
irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* Debugging check for stack overflow: is there less than 2KB free? */
{
long sp;
sp = __get_SP() & (THREAD_SIZE-1);
if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
printk("do_IRQ: stack overflow: %ld\n",
sp - sizeof(struct thread_info));
dump_stack();
}
}
#endif
lpaca = get_paca();
#ifdef CONFIG_SMP
if (lpaca->lppaca.int_dword.fields.ipi_cnt) {
lpaca->lppaca.int_dword.fields.ipi_cnt = 0;
iSeries_smp_message_recv(regs);
}
#endif /* CONFIG_SMP */
lpq = lpaca->lpqueue_ptr;
if (lpq && ItLpQueue_isLpIntPending(lpq))
lpevent_count += ItLpQueue_process(lpq, regs);
irq_exit();
if (lpaca->lppaca.int_dword.fields.decr_int) {
lpaca->lppaca.int_dword.fields.decr_int = 0;
/* Signal a fake decrementer interrupt */
timer_interrupt(regs);
}
}
#else /* CONFIG_PPC_ISERIES */
void do_IRQ(struct pt_regs *regs)
{
int irq;
irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* Debugging check for stack overflow: is there less than 2KB free? */
{
long sp;
sp = __get_SP() & (THREAD_SIZE-1);
if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
printk("do_IRQ: stack overflow: %ld\n",
sp - sizeof(struct thread_info));
dump_stack();
}
}
#endif
irq = ppc_md.get_irq(regs);
if (irq >= 0)
ppc_irq_dispatch_handler(regs, irq);
else
/* That's not SMP safe ... but who cares ? */
ppc_spurious_interrupts++;
irq_exit();
}
#endif /* CONFIG_PPC_ISERIES */
void __init init_IRQ(void)
{
static int once = 0;
if (once)
return;
once++;
ppc_md.init_IRQ();
irq_ctx_init();
}
#ifndef CONFIG_PPC_ISERIES
/*
* Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
*/
#define UNDEFINED_IRQ 0xffffffff
unsigned int virt_irq_to_real_map[NR_IRQS];
/*
* Don't use virtual irqs 0, 1, 2 for devices.
* The pcnet32 driver considers interrupt numbers < 2 to be invalid,
* and 2 is the XICS IPI interrupt.
* We limit virtual irqs to 17 less than NR_IRQS so that when we
* offset them by 16 (to reserve the first 16 for ISA interrupts)
* we don't end up with an interrupt number >= NR_IRQS.
*/
#define MIN_VIRT_IRQ 3
#define MAX_VIRT_IRQ (NR_IRQS - NUM_ISA_INTERRUPTS - 1)
#define NR_VIRT_IRQS (MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1)
void
virt_irq_init(void)
{
int i;
for (i = 0; i < NR_IRQS; i++)
virt_irq_to_real_map[i] = UNDEFINED_IRQ;
}
/* Create a mapping for a real_irq if it doesn't already exist.
* Return the virtual irq as a convenience.
*/
int virt_irq_create_mapping(unsigned int real_irq)
{
unsigned int virq, first_virq;
static int warned;
if (ppc64_interrupt_controller == IC_OPEN_PIC)
return real_irq; /* no mapping for openpic (for now) */
/* don't map interrupts < MIN_VIRT_IRQ */
if (real_irq < MIN_VIRT_IRQ) {
virt_irq_to_real_map[real_irq] = real_irq;
return real_irq;
}
/* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */
virq = real_irq;
if (virq > MAX_VIRT_IRQ)
virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
/* search for this number or a free slot */
first_virq = virq;
while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {
if (virt_irq_to_real_map[virq] == real_irq)
return virq;
if (++virq > MAX_VIRT_IRQ)
virq = MIN_VIRT_IRQ;
if (virq == first_virq)
goto nospace; /* oops, no free slots */
}
virt_irq_to_real_map[virq] = real_irq;
return virq;
nospace:
if (!warned) {
printk(KERN_CRIT "Interrupt table is full\n");
printk(KERN_CRIT "Increase NR_IRQS (currently %d) "
"in your kernel sources and rebuild.\n", NR_IRQS);
warned = 1;
}
return NO_IRQ;
}
/*
* In most cases will get a hit on the very first slot checked in the
* virt_irq_to_real_map. Only when there are a large number of
* IRQs will this be expensive.
*/
unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
{
unsigned int virq;
unsigned int first_virq;
virq = real_irq;
if (virq > MAX_VIRT_IRQ)
virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
first_virq = virq;
do {
if (virt_irq_to_real_map[virq] == real_irq)
return virq;
virq++;
if (virq >= MAX_VIRT_IRQ)
virq = 0;
} while (first_virq != virq);
return NO_IRQ;
}
#endif /* CONFIG_PPC_ISERIES */
#ifdef CONFIG_IRQSTACKS
struct thread_info *softirq_ctx[NR_CPUS];
struct thread_info *hardirq_ctx[NR_CPUS];
void irq_ctx_init(void)
{
struct thread_info *tp;
int i;
for_each_cpu(i) {
memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
tp = softirq_ctx[i];
tp->cpu = i;
tp->preempt_count = SOFTIRQ_OFFSET;
memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
tp = hardirq_ctx[i];
tp->cpu = i;
tp->preempt_count = HARDIRQ_OFFSET;
}
}
void do_softirq(void)
{
unsigned long flags;
struct thread_info *curtp, *irqtp;
if (in_interrupt())
return;
local_irq_save(flags);
if (local_softirq_pending()) {
curtp = current_thread_info();
irqtp = softirq_ctx[smp_processor_id()];
irqtp->task = curtp->task;
call_do_softirq(irqtp);
irqtp->task = NULL;
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(do_softirq);
#endif /* CONFIG_IRQSTACKS */
static int __init setup_noirqdistrib(char *str)
{
distribute_irqs = 0;
return 1;
}
__setup("noirqdistrib", setup_noirqdistrib);