kernel-ark/drivers/scsi/scsi.c
Linus Torvalds 7b3d9545f9 Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0, which gets
us back the original cleanup of 6f5391c283.

It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.

The real problem seems to have been found by Peter Osterlund:

  "pktcdvd sets it [block device size] when opening the /dev/pktcdvd
   device, but when the drive is later opened as /dev/scd0, there is
   nothing that sets it back.  (Btw, 40944 is possible if the disk is a
   CDRW that was formatted with "cdrwtool -m 10236".)

   The problem is that pktcdvd opens the cd device in non-blocking mode
   when pktsetup is run, and doesn't close it again until pktsetup -d is
   run.  The effect is that if you meanwhile open the cd device,
   blkdev.c:do_open() doesn't call bd_set_size() because
   bdev->bd_openers is non-zero."

In particular, to repeat the bug (regardless of whether commit
6f5391c283 is applied or not):

  " 1. Start with an empty drive.
    2. pktsetup 0 /dev/scd0
    3. Insert a CD containing an isofs filesystem.
    4. mount /dev/pktcdvd/0 /mnt/tmp
    5. umount /mnt/tmp
    6. Press the eject button.
    7. Insert a DVD containing a non-writable filesystem.
    8. mount /dev/scd0 /mnt/tmp
    9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
    10. If the DVD contains data beyond the physical size of a CD, you
        get I/O errors in the terminal, and dmesg reports lots of
        "attempt to access beyond end of device" errors."

which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).

The proper fix for that is probably to just do something like

	bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;

in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).

Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 10:17:12 -08:00

1118 lines
30 KiB
C

/*
* scsi.c Copyright (C) 1992 Drew Eckhardt
* Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
* Copyright (C) 2002, 2003 Christoph Hellwig
*
* generic mid-level SCSI driver
* Initial versions: Drew Eckhardt
* Subsequent revisions: Eric Youngdale
*
* <drew@colorado.edu>
*
* Bug correction thanks go to :
* Rik Faith <faith@cs.unc.edu>
* Tommy Thorn <tthorn>
* Thomas Wuensche <tw@fgb1.fgb.mw.tu-muenchen.de>
*
* Modified by Eric Youngdale eric@andante.org or ericy@gnu.ai.mit.edu to
* add scatter-gather, multiple outstanding request, and other
* enhancements.
*
* Native multichannel, wide scsi, /proc/scsi and hot plugging
* support added by Michael Neuffer <mike@i-connect.net>
*
* Added request_module("scsi_hostadapter") for kerneld:
* (Put an "alias scsi_hostadapter your_hostadapter" in /etc/modprobe.conf)
* Bjorn Ekwall <bj0rn@blox.se>
* (changed to kmod)
*
* Major improvements to the timeout, abort, and reset processing,
* as well as performance modifications for large queue depths by
* Leonard N. Zubkoff <lnz@dandelion.com>
*
* Converted cli() code to spinlocks, Ingo Molnar
*
* Jiffies wrap fixes (host->resetting), 3 Dec 1998 Andrea Arcangeli
*
* out_of_space hacks, D. Gilbert (dpg) 990608
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/unistd.h>
#include <linux/spinlock.h>
#include <linux/kmod.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include "scsi_priv.h"
#include "scsi_logging.h"
static void scsi_done(struct scsi_cmnd *cmd);
/*
* Definitions and constants.
*/
#define MIN_RESET_DELAY (2*HZ)
/* Do not call reset on error if we just did a reset within 15 sec. */
#define MIN_RESET_PERIOD (15*HZ)
/*
* Macro to determine the size of SCSI command. This macro takes vendor
* unique commands into account. SCSI commands in groups 6 and 7 are
* vendor unique and we will depend upon the command length being
* supplied correctly in cmd_len.
*/
#define CDB_SIZE(cmd) (((((cmd)->cmnd[0] >> 5) & 7) < 6) ? \
COMMAND_SIZE((cmd)->cmnd[0]) : (cmd)->cmd_len)
/*
* Note - the initial logging level can be set here to log events at boot time.
* After the system is up, you may enable logging via the /proc interface.
*/
unsigned int scsi_logging_level;
#if defined(CONFIG_SCSI_LOGGING)
EXPORT_SYMBOL(scsi_logging_level);
#endif
/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
* You may not alter any existing entry (although adding new ones is
* encouraged once assigned by ANSI/INCITS T10
*/
static const char *const scsi_device_types[] = {
"Direct-Access ",
"Sequential-Access",
"Printer ",
"Processor ",
"WORM ",
"CD-ROM ",
"Scanner ",
"Optical Device ",
"Medium Changer ",
"Communications ",
"ASC IT8 ",
"ASC IT8 ",
"RAID ",
"Enclosure ",
"Direct-Access-RBC",
"Optical card ",
"Bridge controller",
"Object storage ",
"Automation/Drive ",
};
const char * scsi_device_type(unsigned type)
{
if (type == 0x1e)
return "Well-known LUN ";
if (type == 0x1f)
return "No Device ";
if (type >= ARRAY_SIZE(scsi_device_types))
return "Unknown ";
return scsi_device_types[type];
}
EXPORT_SYMBOL(scsi_device_type);
struct scsi_host_cmd_pool {
struct kmem_cache *slab;
unsigned int users;
char *name;
unsigned int slab_flags;
gfp_t gfp_mask;
};
static struct scsi_host_cmd_pool scsi_cmd_pool = {
.name = "scsi_cmd_cache",
.slab_flags = SLAB_HWCACHE_ALIGN,
};
static struct scsi_host_cmd_pool scsi_cmd_dma_pool = {
.name = "scsi_cmd_cache(DMA)",
.slab_flags = SLAB_HWCACHE_ALIGN|SLAB_CACHE_DMA,
.gfp_mask = __GFP_DMA,
};
static DEFINE_MUTEX(host_cmd_pool_mutex);
struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
{
struct scsi_cmnd *cmd;
cmd = kmem_cache_alloc(shost->cmd_pool->slab,
gfp_mask | shost->cmd_pool->gfp_mask);
if (unlikely(!cmd)) {
unsigned long flags;
spin_lock_irqsave(&shost->free_list_lock, flags);
if (likely(!list_empty(&shost->free_list))) {
cmd = list_entry(shost->free_list.next,
struct scsi_cmnd, list);
list_del_init(&cmd->list);
}
spin_unlock_irqrestore(&shost->free_list_lock, flags);
}
return cmd;
}
EXPORT_SYMBOL_GPL(__scsi_get_command);
/*
* Function: scsi_get_command()
*
* Purpose: Allocate and setup a scsi command block
*
* Arguments: dev - parent scsi device
* gfp_mask- allocator flags
*
* Returns: The allocated scsi command structure.
*/
struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask)
{
struct scsi_cmnd *cmd;
/* Bail if we can't get a reference to the device */
if (!get_device(&dev->sdev_gendev))
return NULL;
cmd = __scsi_get_command(dev->host, gfp_mask);
if (likely(cmd != NULL)) {
unsigned long flags;
memset(cmd, 0, sizeof(*cmd));
cmd->device = dev;
init_timer(&cmd->eh_timeout);
INIT_LIST_HEAD(&cmd->list);
spin_lock_irqsave(&dev->list_lock, flags);
list_add_tail(&cmd->list, &dev->cmd_list);
spin_unlock_irqrestore(&dev->list_lock, flags);
cmd->jiffies_at_alloc = jiffies;
} else
put_device(&dev->sdev_gendev);
return cmd;
}
EXPORT_SYMBOL(scsi_get_command);
void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd,
struct device *dev)
{
unsigned long flags;
/* changing locks here, don't need to restore the irq state */
spin_lock_irqsave(&shost->free_list_lock, flags);
if (unlikely(list_empty(&shost->free_list))) {
list_add(&cmd->list, &shost->free_list);
cmd = NULL;
}
spin_unlock_irqrestore(&shost->free_list_lock, flags);
if (likely(cmd != NULL))
kmem_cache_free(shost->cmd_pool->slab, cmd);
put_device(dev);
}
EXPORT_SYMBOL(__scsi_put_command);
/*
* Function: scsi_put_command()
*
* Purpose: Free a scsi command block
*
* Arguments: cmd - command block to free
*
* Returns: Nothing.
*
* Notes: The command must not belong to any lists.
*/
void scsi_put_command(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
unsigned long flags;
/* serious error if the command hasn't come from a device list */
spin_lock_irqsave(&cmd->device->list_lock, flags);
BUG_ON(list_empty(&cmd->list));
list_del_init(&cmd->list);
spin_unlock_irqrestore(&cmd->device->list_lock, flags);
__scsi_put_command(cmd->device->host, cmd, &sdev->sdev_gendev);
}
EXPORT_SYMBOL(scsi_put_command);
/*
* Function: scsi_setup_command_freelist()
*
* Purpose: Setup the command freelist for a scsi host.
*
* Arguments: shost - host to allocate the freelist for.
*
* Returns: Nothing.
*/
int scsi_setup_command_freelist(struct Scsi_Host *shost)
{
struct scsi_host_cmd_pool *pool;
struct scsi_cmnd *cmd;
spin_lock_init(&shost->free_list_lock);
INIT_LIST_HEAD(&shost->free_list);
/*
* Select a command slab for this host and create it if not
* yet existant.
*/
mutex_lock(&host_cmd_pool_mutex);
pool = (shost->unchecked_isa_dma ? &scsi_cmd_dma_pool : &scsi_cmd_pool);
if (!pool->users) {
pool->slab = kmem_cache_create(pool->name,
sizeof(struct scsi_cmnd), 0,
pool->slab_flags, NULL);
if (!pool->slab)
goto fail;
}
pool->users++;
shost->cmd_pool = pool;
mutex_unlock(&host_cmd_pool_mutex);
/*
* Get one backup command for this host.
*/
cmd = kmem_cache_alloc(shost->cmd_pool->slab,
GFP_KERNEL | shost->cmd_pool->gfp_mask);
if (!cmd)
goto fail2;
list_add(&cmd->list, &shost->free_list);
return 0;
fail2:
if (!--pool->users)
kmem_cache_destroy(pool->slab);
return -ENOMEM;
fail:
mutex_unlock(&host_cmd_pool_mutex);
return -ENOMEM;
}
/*
* Function: scsi_destroy_command_freelist()
*
* Purpose: Release the command freelist for a scsi host.
*
* Arguments: shost - host that's freelist is going to be destroyed
*/
void scsi_destroy_command_freelist(struct Scsi_Host *shost)
{
while (!list_empty(&shost->free_list)) {
struct scsi_cmnd *cmd;
cmd = list_entry(shost->free_list.next, struct scsi_cmnd, list);
list_del_init(&cmd->list);
kmem_cache_free(shost->cmd_pool->slab, cmd);
}
mutex_lock(&host_cmd_pool_mutex);
if (!--shost->cmd_pool->users)
kmem_cache_destroy(shost->cmd_pool->slab);
mutex_unlock(&host_cmd_pool_mutex);
}
#ifdef CONFIG_SCSI_LOGGING
void scsi_log_send(struct scsi_cmnd *cmd)
{
unsigned int level;
/*
* If ML QUEUE log level is greater than or equal to:
*
* 1: nothing (match completion)
*
* 2: log opcode + command of all commands
*
* 3: same as 2 plus dump cmd address
*
* 4: same as 3 plus dump extra junk
*/
if (unlikely(scsi_logging_level)) {
level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
SCSI_LOG_MLQUEUE_BITS);
if (level > 1) {
scmd_printk(KERN_INFO, cmd, "Send: ");
if (level > 2)
printk("0x%p ", cmd);
printk("\n");
scsi_print_command(cmd);
if (level > 3) {
printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
" queuecommand 0x%p\n",
scsi_sglist(cmd), scsi_bufflen(cmd),
cmd->device->host->hostt->queuecommand);
}
}
}
}
void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
{
unsigned int level;
/*
* If ML COMPLETE log level is greater than or equal to:
*
* 1: log disposition, result, opcode + command, and conditionally
* sense data for failures or non SUCCESS dispositions.
*
* 2: same as 1 but for all command completions.
*
* 3: same as 2 plus dump cmd address
*
* 4: same as 3 plus dump extra junk
*/
if (unlikely(scsi_logging_level)) {
level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
SCSI_LOG_MLCOMPLETE_BITS);
if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
(level > 1)) {
scmd_printk(KERN_INFO, cmd, "Done: ");
if (level > 2)
printk("0x%p ", cmd);
/*
* Dump truncated values, so we usually fit within
* 80 chars.
*/
switch (disposition) {
case SUCCESS:
printk("SUCCESS\n");
break;
case NEEDS_RETRY:
printk("RETRY\n");
break;
case ADD_TO_MLQUEUE:
printk("MLQUEUE\n");
break;
case FAILED:
printk("FAILED\n");
break;
case TIMEOUT_ERROR:
/*
* If called via scsi_times_out.
*/
printk("TIMEOUT\n");
break;
default:
printk("UNKNOWN\n");
}
scsi_print_result(cmd);
scsi_print_command(cmd);
if (status_byte(cmd->result) & CHECK_CONDITION)
scsi_print_sense("", cmd);
if (level > 3)
scmd_printk(KERN_INFO, cmd,
"scsi host busy %d failed %d\n",
cmd->device->host->host_busy,
cmd->device->host->host_failed);
}
}
}
#endif
/*
* Assign a serial number to the request for error recovery
* and debugging purposes. Protected by the Host_Lock of host.
*/
static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
cmd->serial_number = host->cmd_serial_number++;
if (cmd->serial_number == 0)
cmd->serial_number = host->cmd_serial_number++;
}
/*
* Function: scsi_dispatch_command
*
* Purpose: Dispatch a command to the low-level driver.
*
* Arguments: cmd - command block we are dispatching.
*
* Notes:
*/
int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
{
struct Scsi_Host *host = cmd->device->host;
unsigned long flags = 0;
unsigned long timeout;
int rtn = 0;
/* check if the device is still usable */
if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
/* in SDEV_DEL we error all commands. DID_NO_CONNECT
* returns an immediate error upwards, and signals
* that the device is no longer present */
cmd->result = DID_NO_CONNECT << 16;
atomic_inc(&cmd->device->iorequest_cnt);
__scsi_done(cmd);
/* return 0 (because the command has been processed) */
goto out;
}
/* Check to see if the scsi lld put this device into state SDEV_BLOCK. */
if (unlikely(cmd->device->sdev_state == SDEV_BLOCK)) {
/*
* in SDEV_BLOCK, the command is just put back on the device
* queue. The suspend state has already blocked the queue so
* future requests should not occur until the device
* transitions out of the suspend state.
*/
scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
SCSI_LOG_MLQUEUE(3, printk("queuecommand : device blocked \n"));
/*
* NOTE: rtn is still zero here because we don't need the
* queue to be plugged on return (it's already stopped)
*/
goto out;
}
/*
* If SCSI-2 or lower, store the LUN value in cmnd.
*/
if (cmd->device->scsi_level <= SCSI_2 &&
cmd->device->scsi_level != SCSI_UNKNOWN) {
cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
(cmd->device->lun << 5 & 0xe0);
}
/*
* We will wait MIN_RESET_DELAY clock ticks after the last reset so
* we can avoid the drive not being ready.
*/
timeout = host->last_reset + MIN_RESET_DELAY;
if (host->resetting && time_before(jiffies, timeout)) {
int ticks_remaining = timeout - jiffies;
/*
* NOTE: This may be executed from within an interrupt
* handler! This is bad, but for now, it'll do. The irq
* level of the interrupt handler has been masked out by the
* platform dependent interrupt handling code already, so the
* sti() here will not cause another call to the SCSI host's
* interrupt handler (assuming there is one irq-level per
* host).
*/
while (--ticks_remaining >= 0)
mdelay(1 + 999 / HZ);
host->resetting = 0;
}
/*
* AK: unlikely race here: for some reason the timer could
* expire before the serial number is set up below.
*/
scsi_add_timer(cmd, cmd->timeout_per_command, scsi_times_out);
scsi_log_send(cmd);
/*
* We will use a queued command if possible, otherwise we will
* emulate the queuing and calling of completion function ourselves.
*/
atomic_inc(&cmd->device->iorequest_cnt);
/*
* Before we queue this command, check if the command
* length exceeds what the host adapter can handle.
*/
if (CDB_SIZE(cmd) > cmd->device->host->max_cmd_len) {
SCSI_LOG_MLQUEUE(3,
printk("queuecommand : command too long.\n"));
cmd->result = (DID_ABORT << 16);
scsi_done(cmd);
goto out;
}
spin_lock_irqsave(host->host_lock, flags);
scsi_cmd_get_serial(host, cmd);
if (unlikely(host->shost_state == SHOST_DEL)) {
cmd->result = (DID_NO_CONNECT << 16);
scsi_done(cmd);
} else {
rtn = host->hostt->queuecommand(cmd, scsi_done);
}
spin_unlock_irqrestore(host->host_lock, flags);
if (rtn) {
if (scsi_delete_timer(cmd)) {
atomic_inc(&cmd->device->iodone_cnt);
scsi_queue_insert(cmd,
(rtn == SCSI_MLQUEUE_DEVICE_BUSY) ?
rtn : SCSI_MLQUEUE_HOST_BUSY);
}
SCSI_LOG_MLQUEUE(3,
printk("queuecommand : request rejected\n"));
}
out:
SCSI_LOG_MLQUEUE(3, printk("leaving scsi_dispatch_cmnd()\n"));
return rtn;
}
/**
* scsi_req_abort_cmd -- Request command recovery for the specified command
* cmd: pointer to the SCSI command of interest
*
* This function requests that SCSI Core start recovery for the
* command by deleting the timer and adding the command to the eh
* queue. It can be called by either LLDDs or SCSI Core. LLDDs who
* implement their own error recovery MAY ignore the timeout event if
* they generated scsi_req_abort_cmd.
*/
void scsi_req_abort_cmd(struct scsi_cmnd *cmd)
{
if (!scsi_delete_timer(cmd))
return;
scsi_times_out(cmd);
}
EXPORT_SYMBOL(scsi_req_abort_cmd);
/**
* scsi_done - Enqueue the finished SCSI command into the done queue.
* @cmd: The SCSI Command for which a low-level device driver (LLDD) gives
* ownership back to SCSI Core -- i.e. the LLDD has finished with it.
*
* This function is the mid-level's (SCSI Core) interrupt routine, which
* regains ownership of the SCSI command (de facto) from a LLDD, and enqueues
* the command to the done queue for further processing.
*
* This is the producer of the done queue who enqueues at the tail.
*
* This function is interrupt context safe.
*/
static void scsi_done(struct scsi_cmnd *cmd)
{
/*
* We don't have to worry about this one timing out any more.
* If we are unable to remove the timer, then the command
* has already timed out. In which case, we have no choice but to
* let the timeout function run, as we have no idea where in fact
* that function could really be. It might be on another processor,
* etc, etc.
*/
if (!scsi_delete_timer(cmd))
return;
__scsi_done(cmd);
}
/* Private entry to scsi_done() to complete a command when the timer
* isn't running --- used by scsi_times_out */
void __scsi_done(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
/*
* Set the serial numbers back to zero
*/
cmd->serial_number = 0;
atomic_inc(&cmd->device->iodone_cnt);
if (cmd->result)
atomic_inc(&cmd->device->ioerr_cnt);
BUG_ON(!rq);
/*
* The uptodate/nbytes values don't matter, as we allow partial
* completes and thus will check this in the softirq callback
*/
rq->completion_data = cmd;
blk_complete_request(rq);
}
/* Move this to a header if it becomes more generally useful */
static struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
{
return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
}
/*
* Function: scsi_finish_command
*
* Purpose: Pass command off to upper layer for finishing of I/O
* request, waking processes that are waiting on results,
* etc.
*/
void scsi_finish_command(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
struct Scsi_Host *shost = sdev->host;
struct scsi_driver *drv;
unsigned int good_bytes;
scsi_device_unbusy(sdev);
/*
* Clear the flags which say that the device/host is no longer
* capable of accepting new commands. These are set in scsi_queue.c
* for both the queue full condition on a device, and for a
* host full condition on the host.
*
* XXX(hch): What about locking?
*/
shost->host_blocked = 0;
sdev->device_blocked = 0;
/*
* If we have valid sense information, then some kind of recovery
* must have taken place. Make a note of this.
*/
if (SCSI_SENSE_VALID(cmd))
cmd->result |= (DRIVER_SENSE << 24);
SCSI_LOG_MLCOMPLETE(4, sdev_printk(KERN_INFO, sdev,
"Notifying upper driver of completion "
"(result %x)\n", cmd->result));
good_bytes = cmd->request_bufflen;
if (cmd->request->cmd_type != REQ_TYPE_BLOCK_PC) {
drv = scsi_cmd_to_driver(cmd);
if (drv->done)
good_bytes = drv->done(cmd);
}
scsi_io_completion(cmd, good_bytes);
}
EXPORT_SYMBOL(scsi_finish_command);
/*
* Function: scsi_adjust_queue_depth()
*
* Purpose: Allow low level drivers to tell us to change the queue depth
* on a specific SCSI device
*
* Arguments: sdev - SCSI Device in question
* tagged - Do we use tagged queueing (non-0) or do we treat
* this device as an untagged device (0)
* tags - Number of tags allowed if tagged queueing enabled,
* or number of commands the low level driver can
* queue up in non-tagged mode (as per cmd_per_lun).
*
* Returns: Nothing
*
* Lock Status: None held on entry
*
* Notes: Low level drivers may call this at any time and we will do
* the right thing depending on whether or not the device is
* currently active and whether or not it even has the
* command blocks built yet.
*/
void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
{
unsigned long flags;
/*
* refuse to set tagged depth to an unworkable size
*/
if (tags <= 0)
return;
spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
/* Check to see if the queue is managed by the block layer
* if it is, and we fail to adjust the depth, exit */
if (blk_queue_tagged(sdev->request_queue) &&
blk_queue_resize_tags(sdev->request_queue, tags) != 0)
goto out;
sdev->queue_depth = tags;
switch (tagged) {
case MSG_ORDERED_TAG:
sdev->ordered_tags = 1;
sdev->simple_tags = 1;
break;
case MSG_SIMPLE_TAG:
sdev->ordered_tags = 0;
sdev->simple_tags = 1;
break;
default:
sdev_printk(KERN_WARNING, sdev,
"scsi_adjust_queue_depth, bad queue type, "
"disabled\n");
case 0:
sdev->ordered_tags = sdev->simple_tags = 0;
sdev->queue_depth = tags;
break;
}
out:
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
}
EXPORT_SYMBOL(scsi_adjust_queue_depth);
/*
* Function: scsi_track_queue_full()
*
* Purpose: This function will track successive QUEUE_FULL events on a
* specific SCSI device to determine if and when there is a
* need to adjust the queue depth on the device.
*
* Arguments: sdev - SCSI Device in question
* depth - Current number of outstanding SCSI commands on
* this device, not counting the one returned as
* QUEUE_FULL.
*
* Returns: 0 - No change needed
* >0 - Adjust queue depth to this new depth
* -1 - Drop back to untagged operation using host->cmd_per_lun
* as the untagged command depth
*
* Lock Status: None held on entry
*
* Notes: Low level drivers may call this at any time and we will do
* "The Right Thing." We are interrupt context safe.
*/
int scsi_track_queue_full(struct scsi_device *sdev, int depth)
{
if ((jiffies >> 4) == sdev->last_queue_full_time)
return 0;
sdev->last_queue_full_time = (jiffies >> 4);
if (sdev->last_queue_full_depth != depth) {
sdev->last_queue_full_count = 1;
sdev->last_queue_full_depth = depth;
} else {
sdev->last_queue_full_count++;
}
if (sdev->last_queue_full_count <= 10)
return 0;
if (sdev->last_queue_full_depth < 8) {
/* Drop back to untagged */
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
return -1;
}
if (sdev->ordered_tags)
scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
else
scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
return depth;
}
EXPORT_SYMBOL(scsi_track_queue_full);
/**
* scsi_device_get - get an addition reference to a scsi_device
* @sdev: device to get a reference to
*
* Gets a reference to the scsi_device and increments the use count
* of the underlying LLDD module. You must hold host_lock of the
* parent Scsi_Host or already have a reference when calling this.
*/
int scsi_device_get(struct scsi_device *sdev)
{
if (sdev->sdev_state == SDEV_DEL)
return -ENXIO;
if (!get_device(&sdev->sdev_gendev))
return -ENXIO;
/* We can fail this if we're doing SCSI operations
* from module exit (like cache flush) */
try_module_get(sdev->host->hostt->module);
return 0;
}
EXPORT_SYMBOL(scsi_device_get);
/**
* scsi_device_put - release a reference to a scsi_device
* @sdev: device to release a reference on.
*
* Release a reference to the scsi_device and decrements the use count
* of the underlying LLDD module. The device is freed once the last
* user vanishes.
*/
void scsi_device_put(struct scsi_device *sdev)
{
#ifdef CONFIG_MODULE_UNLOAD
struct module *module = sdev->host->hostt->module;
/* The module refcount will be zero if scsi_device_get()
* was called from a module removal routine */
if (module && module_refcount(module) != 0)
module_put(module);
#endif
put_device(&sdev->sdev_gendev);
}
EXPORT_SYMBOL(scsi_device_put);
/* helper for shost_for_each_device, thus not documented */
struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost,
struct scsi_device *prev)
{
struct list_head *list = (prev ? &prev->siblings : &shost->__devices);
struct scsi_device *next = NULL;
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
while (list->next != &shost->__devices) {
next = list_entry(list->next, struct scsi_device, siblings);
/* skip devices that we can't get a reference to */
if (!scsi_device_get(next))
break;
next = NULL;
list = list->next;
}
spin_unlock_irqrestore(shost->host_lock, flags);
if (prev)
scsi_device_put(prev);
return next;
}
EXPORT_SYMBOL(__scsi_iterate_devices);
/**
* starget_for_each_device - helper to walk all devices of a target
* @starget: target whose devices we want to iterate over.
*
* This traverses over each device of @starget. The devices have
* a reference that must be released by scsi_host_put when breaking
* out of the loop.
*/
void starget_for_each_device(struct scsi_target *starget, void *data,
void (*fn)(struct scsi_device *, void *))
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct scsi_device *sdev;
shost_for_each_device(sdev, shost) {
if ((sdev->channel == starget->channel) &&
(sdev->id == starget->id))
fn(sdev, data);
}
}
EXPORT_SYMBOL(starget_for_each_device);
/**
* __starget_for_each_device - helper to walk all devices of a target
* (UNLOCKED)
* @starget: target whose devices we want to iterate over.
*
* This traverses over each device of @starget. It does _not_
* take a reference on the scsi_device, so the whole loop must be
* protected by shost->host_lock.
*
* Note: The only reason why drivers would want to use this is because
* they need to access the device list in irq context. Otherwise you
* really want to use starget_for_each_device instead.
**/
void __starget_for_each_device(struct scsi_target *starget, void *data,
void (*fn)(struct scsi_device *, void *))
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct scsi_device *sdev;
__shost_for_each_device(sdev, shost) {
if ((sdev->channel == starget->channel) &&
(sdev->id == starget->id))
fn(sdev, data);
}
}
EXPORT_SYMBOL(__starget_for_each_device);
/**
* __scsi_device_lookup_by_target - find a device given the target (UNLOCKED)
* @starget: SCSI target pointer
* @lun: SCSI Logical Unit Number
*
* Looks up the scsi_device with the specified @lun for a give
* @starget. The returned scsi_device does not have an additional
* reference. You must hold the host's host_lock over this call and
* any access to the returned scsi_device.
*
* Note: The only reason why drivers would want to use this is because
* they're need to access the device list in irq context. Otherwise you
* really want to use scsi_device_lookup_by_target instead.
**/
struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget,
uint lun)
{
struct scsi_device *sdev;
list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
if (sdev->lun ==lun)
return sdev;
}
return NULL;
}
EXPORT_SYMBOL(__scsi_device_lookup_by_target);
/**
* scsi_device_lookup_by_target - find a device given the target
* @starget: SCSI target pointer
* @lun: SCSI Logical Unit Number
*
* Looks up the scsi_device with the specified @channel, @id, @lun for a
* give host. The returned scsi_device has an additional reference that
* needs to be release with scsi_host_put once you're done with it.
**/
struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
uint lun)
{
struct scsi_device *sdev;
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
sdev = __scsi_device_lookup_by_target(starget, lun);
if (sdev && scsi_device_get(sdev))
sdev = NULL;
spin_unlock_irqrestore(shost->host_lock, flags);
return sdev;
}
EXPORT_SYMBOL(scsi_device_lookup_by_target);
/**
* scsi_device_lookup - find a device given the host (UNLOCKED)
* @shost: SCSI host pointer
* @channel: SCSI channel (zero if only one channel)
* @pun: SCSI target number (physical unit number)
* @lun: SCSI Logical Unit Number
*
* Looks up the scsi_device with the specified @channel, @id, @lun for a
* give host. The returned scsi_device does not have an additional reference.
* You must hold the host's host_lock over this call and any access to the
* returned scsi_device.
*
* Note: The only reason why drivers would want to use this is because
* they're need to access the device list in irq context. Otherwise you
* really want to use scsi_device_lookup instead.
**/
struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost,
uint channel, uint id, uint lun)
{
struct scsi_device *sdev;
list_for_each_entry(sdev, &shost->__devices, siblings) {
if (sdev->channel == channel && sdev->id == id &&
sdev->lun ==lun)
return sdev;
}
return NULL;
}
EXPORT_SYMBOL(__scsi_device_lookup);
/**
* scsi_device_lookup - find a device given the host
* @shost: SCSI host pointer
* @channel: SCSI channel (zero if only one channel)
* @id: SCSI target number (physical unit number)
* @lun: SCSI Logical Unit Number
*
* Looks up the scsi_device with the specified @channel, @id, @lun for a
* give host. The returned scsi_device has an additional reference that
* needs to be release with scsi_host_put once you're done with it.
**/
struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost,
uint channel, uint id, uint lun)
{
struct scsi_device *sdev;
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
sdev = __scsi_device_lookup(shost, channel, id, lun);
if (sdev && scsi_device_get(sdev))
sdev = NULL;
spin_unlock_irqrestore(shost->host_lock, flags);
return sdev;
}
EXPORT_SYMBOL(scsi_device_lookup);
MODULE_DESCRIPTION("SCSI core");
MODULE_LICENSE("GPL");
module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");
static int __init init_scsi(void)
{
int error;
error = scsi_init_queue();
if (error)
return error;
error = scsi_init_procfs();
if (error)
goto cleanup_queue;
error = scsi_init_devinfo();
if (error)
goto cleanup_procfs;
error = scsi_init_hosts();
if (error)
goto cleanup_devlist;
error = scsi_init_sysctl();
if (error)
goto cleanup_hosts;
error = scsi_sysfs_register();
if (error)
goto cleanup_sysctl;
scsi_netlink_init();
printk(KERN_NOTICE "SCSI subsystem initialized\n");
return 0;
cleanup_sysctl:
scsi_exit_sysctl();
cleanup_hosts:
scsi_exit_hosts();
cleanup_devlist:
scsi_exit_devinfo();
cleanup_procfs:
scsi_exit_procfs();
cleanup_queue:
scsi_exit_queue();
printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
-error);
return error;
}
static void __exit exit_scsi(void)
{
scsi_netlink_exit();
scsi_sysfs_unregister();
scsi_exit_sysctl();
scsi_exit_hosts();
scsi_exit_devinfo();
scsi_exit_procfs();
scsi_exit_queue();
}
subsys_initcall(init_scsi);
module_exit(exit_scsi);