kernel-ark/arch/sparc/kernel/nmi.c
David S. Miller e6617c6ec2 sparc64: Kill spurious NMI watchdog triggers by increasing limit to 30 seconds.
This is a compromise and a temporary workaround for bootup NMI
watchdog triggers some people see with qla2xxx devices present.

This happens when, for example:

CPU 0 is in the driver init and looping submitting mailbox commands to
load the firmware, then waiting for completion.

CPU 1 is receiving the device interrupts.  CPU 1 is where the NMI
watchdog triggers.

CPU 0 is submitting mailbox commands fast enough that by the time CPU
1 returns from the device interrupt handler, a new one is pending.
This sequence runs for more than 5 seconds.

The problematic case is CPU 1's timer interrupt running when the
barrage of device interrupts begin.  Then we have:

	timer interrupt
	return for softirq checking
	pending, thus enable interrupts

		 qla2xxx interrupt
		 return
		 qla2xxx interrupt
		 return
		 ... 5+ seconds pass
		 final qla2xxx interrupt for fw load
		 return

	run timer softirq
	return

At some point in the multi-second qla2xxx interrupt storm we trigger
the NMI watchdog on CPU 1 from the NMI interrupt handler.

The timer softirq, once we get back to running it, is smart enough to
run the timer work enough times to make up for the missed timer
interrupts.

However, the NMI watchdogs (both x86 and sparc) use the timer
interrupt count to notice the cpu is wedged.  But in the above
scenerio we'll receive only one such timer interrupt even if we last
all the way back to running the timer softirq.

The default watchdog trigger point is only 5 seconds, which is pretty
low (the softwatchdog triggers at 60 seconds).  So increase it to 30
seconds for now.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03 02:35:20 -07:00

247 lines
5.1 KiB
C

/* Pseudo NMI support on sparc64 systems.
*
* Copyright (C) 2009 David S. Miller <davem@davemloft.net>
*
* The NMI watchdog support and infrastructure is based almost
* entirely upon the x86 NMI support code.
*/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/kprobes.h>
#include <linux/kernel_stat.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/kdebug.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <asm/ptrace.h>
#include <asm/local.h>
#include <asm/pcr.h>
/* We don't have a real NMI on sparc64, but we can fake one
* up using profiling counter overflow interrupts and interrupt
* levels.
*
* The profile overflow interrupts at level 15, so we use
* level 14 as our IRQ off level.
*/
static int nmi_watchdog_active;
static int panic_on_timeout;
int nmi_usable;
EXPORT_SYMBOL_GPL(nmi_usable);
static unsigned int nmi_hz = HZ;
static DEFINE_PER_CPU(unsigned int, last_irq_sum);
static DEFINE_PER_CPU(local_t, alert_counter);
static DEFINE_PER_CPU(int, nmi_touch);
void touch_nmi_watchdog(void)
{
if (nmi_watchdog_active) {
int cpu;
for_each_present_cpu(cpu) {
if (per_cpu(nmi_touch, cpu) != 1)
per_cpu(nmi_touch, cpu) = 1;
}
}
touch_softlockup_watchdog();
}
EXPORT_SYMBOL(touch_nmi_watchdog);
static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
{
if (notify_die(DIE_NMIWATCHDOG, str, regs, 0,
pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
return;
console_verbose();
bust_spinlocks(1);
printk(KERN_EMERG "%s", str);
printk(" on CPU%d, ip %08lx, registers:\n",
smp_processor_id(), regs->tpc);
show_regs(regs);
dump_stack();
bust_spinlocks(0);
if (do_panic || panic_on_oops)
panic("Non maskable interrupt");
local_irq_enable();
do_exit(SIGBUS);
}
notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
{
unsigned int sum, touched = 0;
int cpu = smp_processor_id();
clear_softint(1 << irq);
pcr_ops->write(PCR_PIC_PRIV);
local_cpu_data().__nmi_count++;
if (notify_die(DIE_NMI, "nmi", regs, 0,
pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
touched = 1;
sum = kstat_irqs_cpu(0, cpu);
if (__get_cpu_var(nmi_touch)) {
__get_cpu_var(nmi_touch) = 0;
touched = 1;
}
if (!touched && __get_cpu_var(last_irq_sum) == sum) {
local_inc(&__get_cpu_var(alert_counter));
if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz)
die_nmi("BUG: NMI Watchdog detected LOCKUP",
regs, panic_on_timeout);
} else {
__get_cpu_var(last_irq_sum) = sum;
local_set(&__get_cpu_var(alert_counter), 0);
}
if (nmi_usable) {
write_pic(picl_value(nmi_hz));
pcr_ops->write(pcr_enable);
}
}
static inline unsigned int get_nmi_count(int cpu)
{
return cpu_data(cpu).__nmi_count;
}
static int endflag __initdata;
static __init void nmi_cpu_busy(void *data)
{
local_irq_enable_in_hardirq();
while (endflag == 0)
mb();
}
static void report_broken_nmi(int cpu, int *prev_nmi_count)
{
printk(KERN_CONT "\n");
printk(KERN_WARNING
"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
printk(KERN_WARNING
"Please report this to bugzilla.kernel.org,\n");
printk(KERN_WARNING
"and attach the output of the 'dmesg' command.\n");
nmi_usable = 0;
}
static void stop_watchdog(void *unused)
{
pcr_ops->write(PCR_PIC_PRIV);
}
static int __init check_nmi_watchdog(void)
{
unsigned int *prev_nmi_count;
int cpu, err;
prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL);
if (!prev_nmi_count) {
err = -ENOMEM;
goto error;
}
printk(KERN_INFO "Testing NMI watchdog ... ");
smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
for_each_possible_cpu(cpu)
prev_nmi_count[cpu] = get_nmi_count(cpu);
local_irq_enable();
mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
for_each_online_cpu(cpu) {
if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
report_broken_nmi(cpu, prev_nmi_count);
}
endflag = 1;
if (!nmi_usable) {
kfree(prev_nmi_count);
err = -ENODEV;
goto error;
}
printk("OK.\n");
nmi_hz = 1;
kfree(prev_nmi_count);
return 0;
error:
on_each_cpu(stop_watchdog, NULL, 1);
return err;
}
static void start_watchdog(void *unused)
{
pcr_ops->write(PCR_PIC_PRIV);
write_pic(picl_value(nmi_hz));
pcr_ops->write(pcr_enable);
}
void nmi_adjust_hz(unsigned int new_hz)
{
nmi_hz = new_hz;
on_each_cpu(start_watchdog, NULL, 1);
}
EXPORT_SYMBOL_GPL(nmi_adjust_hz);
static int nmi_shutdown(struct notifier_block *nb, unsigned long cmd, void *p)
{
on_each_cpu(stop_watchdog, NULL, 1);
return 0;
}
static struct notifier_block nmi_reboot_notifier = {
.notifier_call = nmi_shutdown,
};
int __init nmi_init(void)
{
int err;
nmi_usable = 1;
on_each_cpu(start_watchdog, NULL, 1);
err = check_nmi_watchdog();
if (!err) {
err = register_reboot_notifier(&nmi_reboot_notifier);
if (err) {
nmi_usable = 0;
on_each_cpu(stop_watchdog, NULL, 1);
}
}
return err;
}
static int __init setup_nmi_watchdog(char *str)
{
if (!strncmp(str, "panic", 5))
panic_on_timeout = 1;
return 0;
}
__setup("nmi_watchdog=", setup_nmi_watchdog);