15ac408ee5
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
275 lines
6.4 KiB
C
275 lines
6.4 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-voiceblue.c
|
|
*
|
|
* Modified from board-generic.c
|
|
*
|
|
* Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
|
|
*
|
|
* Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/serial_reg.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/gpio.h>
|
|
#include <mach/mux.h>
|
|
#include <mach/tc.h>
|
|
#include <mach/usb.h>
|
|
|
|
static struct plat_serial8250_port voiceblue_ports[] = {
|
|
{
|
|
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
|
|
.irq = OMAP_GPIO_IRQ(12),
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 1,
|
|
.uartclk = 3686400,
|
|
},
|
|
{
|
|
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
|
|
.irq = OMAP_GPIO_IRQ(13),
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 1,
|
|
.uartclk = 3686400,
|
|
},
|
|
{
|
|
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
|
|
.irq = OMAP_GPIO_IRQ(14),
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 1,
|
|
.uartclk = 3686400,
|
|
},
|
|
{
|
|
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
|
|
.irq = OMAP_GPIO_IRQ(15),
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 1,
|
|
.uartclk = 3686400,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device serial_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM1,
|
|
.dev = {
|
|
.platform_data = voiceblue_ports,
|
|
},
|
|
};
|
|
|
|
static int __init ext_uart_init(void)
|
|
{
|
|
return platform_device_register(&serial_device);
|
|
}
|
|
arch_initcall(ext_uart_init);
|
|
|
|
static struct flash_platform_data voiceblue_flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource voiceblue_flash_resource = {
|
|
.start = OMAP_CS0_PHYS,
|
|
.end = OMAP_CS0_PHYS + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device voiceblue_flash_device = {
|
|
.name = "omapflash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &voiceblue_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &voiceblue_flash_resource,
|
|
};
|
|
|
|
static struct resource voiceblue_smc91x_resources[] = {
|
|
[0] = {
|
|
.start = OMAP_CS2_PHYS + 0x300,
|
|
.end = OMAP_CS2_PHYS + 0x300 + 16,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = OMAP_GPIO_IRQ(8),
|
|
.end = OMAP_GPIO_IRQ(8),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
},
|
|
};
|
|
|
|
static struct platform_device voiceblue_smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
|
|
.resource = voiceblue_smc91x_resources,
|
|
};
|
|
|
|
static struct platform_device *voiceblue_devices[] __initdata = {
|
|
&voiceblue_flash_device,
|
|
&voiceblue_smc91x_device,
|
|
};
|
|
|
|
static struct omap_usb_config voiceblue_usb_config __initdata = {
|
|
.hmc_mode = 3,
|
|
.register_host = 1,
|
|
.register_dev = 1,
|
|
.pins[0] = 2,
|
|
.pins[1] = 6,
|
|
.pins[2] = 6,
|
|
};
|
|
|
|
static struct omap_board_config_kernel voiceblue_config[] = {
|
|
};
|
|
|
|
static void __init voiceblue_init_irq(void)
|
|
{
|
|
omap1_init_common_hw();
|
|
omap_init_irq();
|
|
omap_gpio_init();
|
|
}
|
|
|
|
static void __init voiceblue_init(void)
|
|
{
|
|
/* Watchdog */
|
|
gpio_request(0, "Watchdog");
|
|
/* smc91x reset */
|
|
gpio_request(7, "SMC91x reset");
|
|
gpio_direction_output(7, 1);
|
|
udelay(2); /* wait at least 100ns */
|
|
gpio_set_value(7, 0);
|
|
mdelay(50); /* 50ms until PHY ready */
|
|
/* smc91x interrupt pin */
|
|
gpio_request(8, "SMC91x irq");
|
|
/* 16C554 reset*/
|
|
gpio_request(6, "16C554 reset");
|
|
gpio_direction_output(6, 0);
|
|
/* 16C554 interrupt pins */
|
|
gpio_request(12, "16C554 irq");
|
|
gpio_request(13, "16C554 irq");
|
|
gpio_request(14, "16C554 irq");
|
|
gpio_request(15, "16C554 irq");
|
|
set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
|
|
set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
|
|
set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
|
|
set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
|
|
|
|
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
|
|
omap_board_config = voiceblue_config;
|
|
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
|
|
omap_serial_init();
|
|
omap_usb_init(&voiceblue_usb_config);
|
|
omap_register_i2c_bus(1, 100, NULL, 0);
|
|
|
|
/* There is a good chance board is going up, so enable power LED
|
|
* (it is connected through invertor) */
|
|
omap_writeb(0x00, OMAP_LPG1_LCR);
|
|
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
|
|
}
|
|
|
|
static void __init voiceblue_map_io(void)
|
|
{
|
|
omap1_map_common_io();
|
|
}
|
|
|
|
#define MACHINE_PANICED 1
|
|
#define MACHINE_REBOOTING 2
|
|
#define MACHINE_REBOOT 4
|
|
static unsigned long machine_state;
|
|
|
|
static int panic_event(struct notifier_block *this, unsigned long event,
|
|
void *ptr)
|
|
{
|
|
if (test_and_set_bit(MACHINE_PANICED, &machine_state))
|
|
return NOTIFY_DONE;
|
|
|
|
/* Flash power LED */
|
|
omap_writeb(0x78, OMAP_LPG1_LCR);
|
|
omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block panic_block = {
|
|
.notifier_call = panic_event,
|
|
};
|
|
|
|
static int __init voiceblue_setup(void)
|
|
{
|
|
/* Setup panic notifier */
|
|
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
|
|
|
|
return 0;
|
|
}
|
|
postcore_initcall(voiceblue_setup);
|
|
|
|
static int wdt_gpio_state;
|
|
|
|
void voiceblue_wdt_enable(void)
|
|
{
|
|
gpio_direction_output(0, 0);
|
|
gpio_set_value(0, 1);
|
|
gpio_set_value(0, 0);
|
|
wdt_gpio_state = 0;
|
|
}
|
|
|
|
void voiceblue_wdt_disable(void)
|
|
{
|
|
gpio_set_value(0, 0);
|
|
gpio_set_value(0, 1);
|
|
gpio_set_value(0, 0);
|
|
gpio_direction_input(0);
|
|
}
|
|
|
|
void voiceblue_wdt_ping(void)
|
|
{
|
|
if (test_bit(MACHINE_REBOOT, &machine_state))
|
|
return;
|
|
|
|
wdt_gpio_state = !wdt_gpio_state;
|
|
gpio_set_value(0, wdt_gpio_state);
|
|
}
|
|
|
|
void voiceblue_reset(void)
|
|
{
|
|
set_bit(MACHINE_REBOOT, &machine_state);
|
|
voiceblue_wdt_enable();
|
|
while (1) ;
|
|
}
|
|
|
|
EXPORT_SYMBOL(voiceblue_wdt_enable);
|
|
EXPORT_SYMBOL(voiceblue_wdt_disable);
|
|
EXPORT_SYMBOL(voiceblue_wdt_ping);
|
|
|
|
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
|
|
/* Maintainer: Ladislav Michl <michl@2n.cz> */
|
|
.phys_io = 0xfff00000,
|
|
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
|
|
.boot_params = 0x10000100,
|
|
.map_io = voiceblue_map_io,
|
|
.init_irq = voiceblue_init_irq,
|
|
.init_machine = voiceblue_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|