kernel-ark/drivers/net/bfin_mac.c
Sonic Zhang 4fcc3d3409 netdev:bfin_mac: reclaim and free tx skb as soon as possible after transfer
SKBs hold onto resources that can't be held indefinitely, such as TCP
socket references and netfilter conntrack state.  So if a packet is left
in TX ring for a long time, there might be a TCP socket that cannot be
closed and freed up.

Current blackfin EMAC driver always reclaim and free used tx skbs in future
transfers. The problem is that future transfer may not come as soon as
possible. This patch start a timer after transfer to reclaim and free skb.
There is nearly no performance drop with this patch.

TX interrupt is not enabled because of a strange behavior of the Blackfin EMAC.
If EMAC TX transfer control is turned on, endless TX interrupts are triggered
no matter if TX DMA is enabled or not. Since DMA walks down the ring automatically,
TX transfer control can't be turned off in the middle. The only way is to disable
TX interrupt completely.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 15:04:10 -07:00

1724 lines
42 KiB
C

/*
* Blackfin On-Chip MAC Driver
*
* Copyright 2004-2007 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/crc32.h>
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/platform_device.h>
#include <asm/dma.h>
#include <linux/dma-mapping.h>
#include <asm/div64.h>
#include <asm/dpmc.h>
#include <asm/blackfin.h>
#include <asm/cacheflush.h>
#include <asm/portmux.h>
#include "bfin_mac.h"
#define DRV_NAME "bfin_mac"
#define DRV_VERSION "1.1"
#define DRV_AUTHOR "Bryan Wu, Luke Yang"
#define DRV_DESC "Blackfin on-chip Ethernet MAC driver"
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRV_DESC);
MODULE_ALIAS("platform:bfin_mac");
#if defined(CONFIG_BFIN_MAC_USE_L1)
# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
# define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr)
#else
# define bfin_mac_alloc(dma_handle, size) \
dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL)
# define bfin_mac_free(dma_handle, ptr) \
dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle)
#endif
#define PKT_BUF_SZ 1580
#define MAX_TIMEOUT_CNT 500
/* pointers to maintain transmit list */
static struct net_dma_desc_tx *tx_list_head;
static struct net_dma_desc_tx *tx_list_tail;
static struct net_dma_desc_rx *rx_list_head;
static struct net_dma_desc_rx *rx_list_tail;
static struct net_dma_desc_rx *current_rx_ptr;
static struct net_dma_desc_tx *current_tx_ptr;
static struct net_dma_desc_tx *tx_desc;
static struct net_dma_desc_rx *rx_desc;
#if defined(CONFIG_BFIN_MAC_RMII)
static u16 pin_req[] = P_RMII0;
#else
static u16 pin_req[] = P_MII0;
#endif
static void desc_list_free(void)
{
struct net_dma_desc_rx *r;
struct net_dma_desc_tx *t;
int i;
#if !defined(CONFIG_BFIN_MAC_USE_L1)
dma_addr_t dma_handle = 0;
#endif
if (tx_desc) {
t = tx_list_head;
for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
if (t) {
if (t->skb) {
dev_kfree_skb(t->skb);
t->skb = NULL;
}
t = t->next;
}
}
bfin_mac_free(dma_handle, tx_desc);
}
if (rx_desc) {
r = rx_list_head;
for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
if (r) {
if (r->skb) {
dev_kfree_skb(r->skb);
r->skb = NULL;
}
r = r->next;
}
}
bfin_mac_free(dma_handle, rx_desc);
}
}
static int desc_list_init(void)
{
int i;
struct sk_buff *new_skb;
#if !defined(CONFIG_BFIN_MAC_USE_L1)
/*
* This dma_handle is useless in Blackfin dma_alloc_coherent().
* The real dma handler is the return value of dma_alloc_coherent().
*/
dma_addr_t dma_handle;
#endif
tx_desc = bfin_mac_alloc(&dma_handle,
sizeof(struct net_dma_desc_tx) *
CONFIG_BFIN_TX_DESC_NUM);
if (tx_desc == NULL)
goto init_error;
rx_desc = bfin_mac_alloc(&dma_handle,
sizeof(struct net_dma_desc_rx) *
CONFIG_BFIN_RX_DESC_NUM);
if (rx_desc == NULL)
goto init_error;
/* init tx_list */
tx_list_head = tx_list_tail = tx_desc;
for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
struct net_dma_desc_tx *t = tx_desc + i;
struct dma_descriptor *a = &(t->desc_a);
struct dma_descriptor *b = &(t->desc_b);
/*
* disable DMA
* read from memory WNR = 0
* wordsize is 32 bits
* 6 half words is desc size
* large desc flow
*/
a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
a->start_addr = (unsigned long)t->packet;
a->x_count = 0;
a->next_dma_desc = b;
/*
* enabled DMA
* write to memory WNR = 1
* wordsize is 32 bits
* disable interrupt
* 6 half words is desc size
* large desc flow
*/
b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
b->start_addr = (unsigned long)(&(t->status));
b->x_count = 0;
t->skb = NULL;
tx_list_tail->desc_b.next_dma_desc = a;
tx_list_tail->next = t;
tx_list_tail = t;
}
tx_list_tail->next = tx_list_head; /* tx_list is a circle */
tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a);
current_tx_ptr = tx_list_head;
/* init rx_list */
rx_list_head = rx_list_tail = rx_desc;
for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
struct net_dma_desc_rx *r = rx_desc + i;
struct dma_descriptor *a = &(r->desc_a);
struct dma_descriptor *b = &(r->desc_b);
/* allocate a new skb for next time receive */
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
if (!new_skb) {
printk(KERN_NOTICE DRV_NAME
": init: low on mem - packet dropped\n");
goto init_error;
}
skb_reserve(new_skb, NET_IP_ALIGN);
/* Invidate the data cache of skb->data range when it is write back
* cache. It will prevent overwritting the new data from DMA
*/
blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
(unsigned long)new_skb->end);
r->skb = new_skb;
/*
* enabled DMA
* write to memory WNR = 1
* wordsize is 32 bits
* disable interrupt
* 6 half words is desc size
* large desc flow
*/
a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
/* since RXDWA is enabled */
a->start_addr = (unsigned long)new_skb->data - 2;
a->x_count = 0;
a->next_dma_desc = b;
/*
* enabled DMA
* write to memory WNR = 1
* wordsize is 32 bits
* enable interrupt
* 6 half words is desc size
* large desc flow
*/
b->config = DMAEN | WNR | WDSIZE_32 | DI_EN |
NDSIZE_6 | DMAFLOW_LARGE;
b->start_addr = (unsigned long)(&(r->status));
b->x_count = 0;
rx_list_tail->desc_b.next_dma_desc = a;
rx_list_tail->next = r;
rx_list_tail = r;
}
rx_list_tail->next = rx_list_head; /* rx_list is a circle */
rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a);
current_rx_ptr = rx_list_head;
return 0;
init_error:
desc_list_free();
printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
return -ENOMEM;
}
/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
/*
* MII operations
*/
/* Wait until the previous MDC/MDIO transaction has completed */
static int bfin_mdio_poll(void)
{
int timeout_cnt = MAX_TIMEOUT_CNT;
/* poll the STABUSY bit */
while ((bfin_read_EMAC_STAADD()) & STABUSY) {
udelay(1);
if (timeout_cnt-- < 0) {
printk(KERN_ERR DRV_NAME
": wait MDC/MDIO transaction to complete timeout\n");
return -ETIMEDOUT;
}
}
return 0;
}
/* Read an off-chip register in a PHY through the MDC/MDIO port */
static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
{
int ret;
ret = bfin_mdio_poll();
if (ret)
return ret;
/* read mode */
bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
SET_REGAD((u16) regnum) |
STABUSY);
ret = bfin_mdio_poll();
if (ret)
return ret;
return (int) bfin_read_EMAC_STADAT();
}
/* Write an off-chip register in a PHY through the MDC/MDIO port */
static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
u16 value)
{
int ret;
ret = bfin_mdio_poll();
if (ret)
return ret;
bfin_write_EMAC_STADAT((u32) value);
/* write mode */
bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
SET_REGAD((u16) regnum) |
STAOP |
STABUSY);
return bfin_mdio_poll();
}
static int bfin_mdiobus_reset(struct mii_bus *bus)
{
return 0;
}
static void bfin_mac_adjust_link(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
struct phy_device *phydev = lp->phydev;
unsigned long flags;
int new_state = 0;
spin_lock_irqsave(&lp->lock, flags);
if (phydev->link) {
/* Now we make sure that we can be in full duplex mode.
* If not, we operate in half-duplex mode. */
if (phydev->duplex != lp->old_duplex) {
u32 opmode = bfin_read_EMAC_OPMODE();
new_state = 1;
if (phydev->duplex)
opmode |= FDMODE;
else
opmode &= ~(FDMODE);
bfin_write_EMAC_OPMODE(opmode);
lp->old_duplex = phydev->duplex;
}
if (phydev->speed != lp->old_speed) {
#if defined(CONFIG_BFIN_MAC_RMII)
u32 opmode = bfin_read_EMAC_OPMODE();
switch (phydev->speed) {
case 10:
opmode |= RMII_10;
break;
case 100:
opmode &= ~(RMII_10);
break;
default:
printk(KERN_WARNING
"%s: Ack! Speed (%d) is not 10/100!\n",
DRV_NAME, phydev->speed);
break;
}
bfin_write_EMAC_OPMODE(opmode);
#endif
new_state = 1;
lp->old_speed = phydev->speed;
}
if (!lp->old_link) {
new_state = 1;
lp->old_link = 1;
}
} else if (lp->old_link) {
new_state = 1;
lp->old_link = 0;
lp->old_speed = 0;
lp->old_duplex = -1;
}
if (new_state) {
u32 opmode = bfin_read_EMAC_OPMODE();
phy_print_status(phydev);
pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
}
spin_unlock_irqrestore(&lp->lock, flags);
}
/* MDC = 2.5 MHz */
#define MDC_CLK 2500000
static int mii_probe(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
struct phy_device *phydev = NULL;
unsigned short sysctl;
int i;
u32 sclk, mdc_div;
/* Enable PHY output early */
if (!(bfin_read_VR_CTL() & CLKBUFOE))
bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
sclk = get_sclk();
mdc_div = ((sclk / MDC_CLK) / 2) - 1;
sysctl = bfin_read_EMAC_SYSCTL();
sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
bfin_write_EMAC_SYSCTL(sysctl);
/* search for connect PHY device */
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
if (!tmp_phydev)
continue; /* no PHY here... */
phydev = tmp_phydev;
break; /* found it */
}
/* now we are supposed to have a proper phydev, to attach to... */
if (!phydev) {
printk(KERN_INFO "%s: Don't found any phy device at all\n",
dev->name);
return -ENODEV;
}
#if defined(CONFIG_BFIN_MAC_RMII)
phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
0, PHY_INTERFACE_MODE_RMII);
#else
phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
0, PHY_INTERFACE_MODE_MII);
#endif
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
return PTR_ERR(phydev);
}
/* mask with MAC supported features */
phydev->supported &= (SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full
| SUPPORTED_Autoneg
| SUPPORTED_Pause | SUPPORTED_Asym_Pause
| SUPPORTED_MII
| SUPPORTED_TP);
phydev->advertising = phydev->supported;
lp->old_link = 0;
lp->old_speed = 0;
lp->old_duplex = -1;
lp->phydev = phydev;
printk(KERN_INFO "%s: attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
"@sclk=%dMHz)\n",
DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
MDC_CLK, mdc_div, sclk/1000000);
return 0;
}
/*
* Ethtool support
*/
/*
* interrupt routine for magic packet wakeup
*/
static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id)
{
return IRQ_HANDLED;
}
static int
bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bfin_mac_local *lp = netdev_priv(dev);
if (lp->phydev)
return phy_ethtool_gset(lp->phydev, cmd);
return -EINVAL;
}
static int
bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bfin_mac_local *lp = netdev_priv(dev);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (lp->phydev)
return phy_ethtool_sset(lp->phydev, cmd);
return -EINVAL;
}
static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->fw_version, "N/A");
strcpy(info->bus_info, dev_name(&dev->dev));
}
static void bfin_mac_ethtool_getwol(struct net_device *dev,
struct ethtool_wolinfo *wolinfo)
{
struct bfin_mac_local *lp = netdev_priv(dev);
wolinfo->supported = WAKE_MAGIC;
wolinfo->wolopts = lp->wol;
}
static int bfin_mac_ethtool_setwol(struct net_device *dev,
struct ethtool_wolinfo *wolinfo)
{
struct bfin_mac_local *lp = netdev_priv(dev);
int rc;
if (wolinfo->wolopts & (WAKE_MAGICSECURE |
WAKE_UCAST |
WAKE_MCAST |
WAKE_BCAST |
WAKE_ARP))
return -EOPNOTSUPP;
lp->wol = wolinfo->wolopts;
if (lp->wol && !lp->irq_wake_requested) {
/* register wake irq handler */
rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt,
IRQF_DISABLED, "EMAC_WAKE", dev);
if (rc)
return rc;
lp->irq_wake_requested = true;
}
if (!lp->wol && lp->irq_wake_requested) {
free_irq(IRQ_MAC_WAKEDET, dev);
lp->irq_wake_requested = false;
}
/* Make sure the PHY driver doesn't suspend */
device_init_wakeup(&dev->dev, lp->wol);
return 0;
}
static const struct ethtool_ops bfin_mac_ethtool_ops = {
.get_settings = bfin_mac_ethtool_getsettings,
.set_settings = bfin_mac_ethtool_setsettings,
.get_link = ethtool_op_get_link,
.get_drvinfo = bfin_mac_ethtool_getdrvinfo,
.get_wol = bfin_mac_ethtool_getwol,
.set_wol = bfin_mac_ethtool_setwol,
};
/**************************************************************************/
void setup_system_regs(struct net_device *dev)
{
unsigned short sysctl;
/*
* Odd word alignment for Receive Frame DMA word
* Configure checksum support and rcve frame word alignment
*/
sysctl = bfin_read_EMAC_SYSCTL();
sysctl |= RXDWA;
#if defined(BFIN_MAC_CSUM_OFFLOAD)
sysctl |= RXCKS;
#else
sysctl &= ~RXCKS;
#endif
bfin_write_EMAC_SYSCTL(sysctl);
bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
/* Initialize the TX DMA channel registers */
bfin_write_DMA2_X_COUNT(0);
bfin_write_DMA2_X_MODIFY(4);
bfin_write_DMA2_Y_COUNT(0);
bfin_write_DMA2_Y_MODIFY(0);
/* Initialize the RX DMA channel registers */
bfin_write_DMA1_X_COUNT(0);
bfin_write_DMA1_X_MODIFY(4);
bfin_write_DMA1_Y_COUNT(0);
bfin_write_DMA1_Y_MODIFY(0);
}
static void setup_mac_addr(u8 *mac_addr)
{
u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]);
u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]);
/* this depends on a little-endian machine */
bfin_write_EMAC_ADDRLO(addr_low);
bfin_write_EMAC_ADDRHI(addr_hi);
}
static int bfin_mac_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
if (netif_running(dev))
return -EBUSY;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
setup_mac_addr(dev->dev_addr);
return 0;
}
#ifdef CONFIG_BFIN_MAC_USE_HWSTAMP
#define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE)
static int bfin_mac_hwtstamp_ioctl(struct net_device *netdev,
struct ifreq *ifr, int cmd)
{
struct hwtstamp_config config;
struct bfin_mac_local *lp = netdev_priv(netdev);
u16 ptpctl;
u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff;
if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
return -EFAULT;
pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
__func__, config.flags, config.tx_type, config.rx_filter);
/* reserved for future extensions */
if (config.flags)
return -EINVAL;
if ((config.tx_type != HWTSTAMP_TX_OFF) &&
(config.tx_type != HWTSTAMP_TX_ON))
return -ERANGE;
ptpctl = bfin_read_EMAC_PTP_CTL();
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
/*
* Dont allow any timestamping
*/
ptpfv3 = 0xFFFFFFFF;
bfin_write_EMAC_PTP_FV3(ptpfv3);
break;
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
/*
* Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL)
* to enable all the field matches.
*/
ptpctl &= ~0x1F00;
bfin_write_EMAC_PTP_CTL(ptpctl);
/*
* Keep the default values of the EMAC_PTP_FOFF register.
*/
ptpfoff = 0x4A24170C;
bfin_write_EMAC_PTP_FOFF(ptpfoff);
/*
* Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
* registers.
*/
ptpfv1 = 0x11040800;
bfin_write_EMAC_PTP_FV1(ptpfv1);
ptpfv2 = 0x0140013F;
bfin_write_EMAC_PTP_FV2(ptpfv2);
/*
* The default value (0xFFFC) allows the timestamping of both
* received Sync messages and Delay_Req messages.
*/
ptpfv3 = 0xFFFFFFFC;
bfin_write_EMAC_PTP_FV3(ptpfv3);
config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
break;
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
/* Clear all five comparison mask bits (bits[12:8]) in the
* EMAC_PTP_CTL register to enable all the field matches.
*/
ptpctl &= ~0x1F00;
bfin_write_EMAC_PTP_CTL(ptpctl);
/*
* Keep the default values of the EMAC_PTP_FOFF register, except set
* the PTPCOF field to 0x2A.
*/
ptpfoff = 0x2A24170C;
bfin_write_EMAC_PTP_FOFF(ptpfoff);
/*
* Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
* registers.
*/
ptpfv1 = 0x11040800;
bfin_write_EMAC_PTP_FV1(ptpfv1);
ptpfv2 = 0x0140013F;
bfin_write_EMAC_PTP_FV2(ptpfv2);
/*
* To allow the timestamping of Pdelay_Req and Pdelay_Resp, set
* the value to 0xFFF0.
*/
ptpfv3 = 0xFFFFFFF0;
bfin_write_EMAC_PTP_FV3(ptpfv3);
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
break;
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
/*
* Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the
* EFTM and PTPCM field comparison.
*/
ptpctl &= ~0x1100;
bfin_write_EMAC_PTP_CTL(ptpctl);
/*
* Keep the default values of all the fields of the EMAC_PTP_FOFF
* register, except set the PTPCOF field to 0x0E.
*/
ptpfoff = 0x0E24170C;
bfin_write_EMAC_PTP_FOFF(ptpfoff);
/*
* Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which
* corresponds to PTP messages on the MAC layer.
*/
ptpfv1 = 0x110488F7;
bfin_write_EMAC_PTP_FV1(ptpfv1);
ptpfv2 = 0x0140013F;
bfin_write_EMAC_PTP_FV2(ptpfv2);
/*
* To allow the timestamping of Pdelay_Req and Pdelay_Resp
* messages, set the value to 0xFFF0.
*/
ptpfv3 = 0xFFFFFFF0;
bfin_write_EMAC_PTP_FV3(ptpfv3);
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
break;
default:
return -ERANGE;
}
if (config.tx_type == HWTSTAMP_TX_OFF &&
bfin_mac_hwtstamp_is_none(config.rx_filter)) {
ptpctl &= ~PTP_EN;
bfin_write_EMAC_PTP_CTL(ptpctl);
SSYNC();
} else {
ptpctl |= PTP_EN;
bfin_write_EMAC_PTP_CTL(ptpctl);
/*
* clear any existing timestamp
*/
bfin_read_EMAC_PTP_RXSNAPLO();
bfin_read_EMAC_PTP_RXSNAPHI();
bfin_read_EMAC_PTP_TXSNAPLO();
bfin_read_EMAC_PTP_TXSNAPHI();
/*
* Set registers so that rollover occurs soon to test this.
*/
bfin_write_EMAC_PTP_TIMELO(0x00000000);
bfin_write_EMAC_PTP_TIMEHI(0xFF800000);
SSYNC();
lp->compare.last_update = 0;
timecounter_init(&lp->clock,
&lp->cycles,
ktime_to_ns(ktime_get_real()));
timecompare_update(&lp->compare, 0);
}
lp->stamp_cfg = config;
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompare *cmp)
{
ktime_t sys = ktime_get_real();
pr_debug("%s %s hardware:%d,%d transform system:%d,%d system:%d,%d, cmp:%lld, %lld\n",
__func__, s, hw->tv.sec, hw->tv.nsec, ts->tv.sec, ts->tv.nsec, sys.tv.sec,
sys.tv.nsec, cmp->offset, cmp->skew);
}
static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
{
struct bfin_mac_local *lp = netdev_priv(netdev);
union skb_shared_tx *shtx = skb_tx(skb);
if (shtx->hardware) {
int timeout_cnt = MAX_TIMEOUT_CNT;
/* When doing time stamping, keep the connection to the socket
* a while longer
*/
shtx->in_progress = 1;
/*
* The timestamping is done at the EMAC module's MII/RMII interface
* when the module sees the Start of Frame of an event message packet. This
* interface is the closest possible place to the physical Ethernet transmission
* medium, providing the best timing accuracy.
*/
while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
udelay(1);
if (timeout_cnt == 0)
printk(KERN_ERR DRV_NAME
": fails to timestamp the TX packet\n");
else {
struct skb_shared_hwtstamps shhwtstamps;
u64 ns;
u64 regval;
regval = bfin_read_EMAC_PTP_TXSNAPLO();
regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32;
memset(&shhwtstamps, 0, sizeof(shhwtstamps));
ns = timecounter_cyc2time(&lp->clock,
regval);
timecompare_update(&lp->compare, ns);
shhwtstamps.hwtstamp = ns_to_ktime(ns);
shhwtstamps.syststamp =
timecompare_transform(&lp->compare, ns);
skb_tstamp_tx(skb, &shhwtstamps);
bfin_dump_hwtamp("TX", &shhwtstamps.hwtstamp, &shhwtstamps.syststamp, &lp->compare);
}
}
}
static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
{
struct bfin_mac_local *lp = netdev_priv(netdev);
u32 valid;
u64 regval, ns;
struct skb_shared_hwtstamps *shhwtstamps;
if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter))
return;
valid = bfin_read_EMAC_PTP_ISTAT() & RXEL;
if (!valid)
return;
shhwtstamps = skb_hwtstamps(skb);
regval = bfin_read_EMAC_PTP_RXSNAPLO();
regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32;
ns = timecounter_cyc2time(&lp->clock, regval);
timecompare_update(&lp->compare, ns);
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
shhwtstamps->hwtstamp = ns_to_ktime(ns);
shhwtstamps->syststamp = timecompare_transform(&lp->compare, ns);
bfin_dump_hwtamp("RX", &shhwtstamps->hwtstamp, &shhwtstamps->syststamp, &lp->compare);
}
/*
* bfin_read_clock - read raw cycle counter (to be used by time counter)
*/
static cycle_t bfin_read_clock(const struct cyclecounter *tc)
{
u64 stamp;
stamp = bfin_read_EMAC_PTP_TIMELO();
stamp |= (u64)bfin_read_EMAC_PTP_TIMEHI() << 32ULL;
return stamp;
}
#define PTP_CLK 25000000
static void bfin_mac_hwtstamp_init(struct net_device *netdev)
{
struct bfin_mac_local *lp = netdev_priv(netdev);
u64 append;
/* Initialize hardware timer */
append = PTP_CLK * (1ULL << 32);
do_div(append, get_sclk());
bfin_write_EMAC_PTP_ADDEND((u32)append);
memset(&lp->cycles, 0, sizeof(lp->cycles));
lp->cycles.read = bfin_read_clock;
lp->cycles.mask = CLOCKSOURCE_MASK(64);
lp->cycles.mult = 1000000000 / PTP_CLK;
lp->cycles.shift = 0;
/* Synchronize our NIC clock against system wall clock */
memset(&lp->compare, 0, sizeof(lp->compare));
lp->compare.source = &lp->clock;
lp->compare.target = ktime_get_real;
lp->compare.num_samples = 10;
/* Initialize hwstamp config */
lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF;
}
#else
# define bfin_mac_hwtstamp_is_none(cfg) 0
# define bfin_mac_hwtstamp_init(dev)
# define bfin_mac_hwtstamp_ioctl(dev, ifr, cmd) (-EOPNOTSUPP)
# define bfin_rx_hwtstamp(dev, skb)
# define bfin_tx_hwtstamp(dev, skb)
#endif
static inline void _tx_reclaim_skb(void)
{
do {
tx_list_head->desc_a.config &= ~DMAEN;
tx_list_head->status.status_word = 0;
if (tx_list_head->skb) {
dev_kfree_skb(tx_list_head->skb);
tx_list_head->skb = NULL;
}
tx_list_head = tx_list_head->next;
} while (tx_list_head->status.status_word != 0);
}
static void tx_reclaim_skb(struct bfin_mac_local *lp)
{
int timeout_cnt = MAX_TIMEOUT_CNT;
if (tx_list_head->status.status_word != 0)
_tx_reclaim_skb();
if (current_tx_ptr->next == tx_list_head) {
while (tx_list_head->status.status_word == 0) {
/* slow down polling to avoid too many queue stop. */
udelay(10);
/* reclaim skb if DMA is not running. */
if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN))
break;
if (timeout_cnt-- < 0)
break;
}
if (timeout_cnt >= 0)
_tx_reclaim_skb();
else
netif_stop_queue(lp->ndev);
}
if (current_tx_ptr->next != tx_list_head &&
netif_queue_stopped(lp->ndev))
netif_wake_queue(lp->ndev);
if (tx_list_head != current_tx_ptr) {
/* shorten the timer interval if tx queue is stopped */
if (netif_queue_stopped(lp->ndev))
lp->tx_reclaim_timer.expires =
jiffies + (TX_RECLAIM_JIFFIES >> 4);
else
lp->tx_reclaim_timer.expires =
jiffies + TX_RECLAIM_JIFFIES;
mod_timer(&lp->tx_reclaim_timer,
lp->tx_reclaim_timer.expires);
}
return;
}
static void tx_reclaim_skb_timeout(unsigned long lp)
{
tx_reclaim_skb((struct bfin_mac_local *)lp);
}
static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
u16 *data;
u32 data_align = (unsigned long)(skb->data) & 0x3;
union skb_shared_tx *shtx = skb_tx(skb);
current_tx_ptr->skb = skb;
if (data_align == 0x2) {
/* move skb->data to current_tx_ptr payload */
data = (u16 *)(skb->data) - 1;
*data = (u16)(skb->len);
/*
* When transmitting an Ethernet packet, the PTP_TSYNC module requires
* a DMA_Length_Word field associated with the packet. The lower 12 bits
* of this field are the length of the packet payload in bytes and the higher
* 4 bits are the timestamping enable field.
*/
if (shtx->hardware)
*data |= 0x1000;
current_tx_ptr->desc_a.start_addr = (u32)data;
/* this is important! */
blackfin_dcache_flush_range((u32)data,
(u32)((u8 *)data + skb->len + 4));
} else {
*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
/* enable timestamping for the sent packet */
if (shtx->hardware)
*((u16 *)(current_tx_ptr->packet)) |= 0x1000;
memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
skb->len);
current_tx_ptr->desc_a.start_addr =
(u32)current_tx_ptr->packet;
blackfin_dcache_flush_range(
(u32)current_tx_ptr->packet,
(u32)(current_tx_ptr->packet + skb->len + 2));
}
/* make sure the internal data buffers in the core are drained
* so that the DMA descriptors are completely written when the
* DMA engine goes to fetch them below
*/
SSYNC();
/* always clear status buffer before start tx dma */
current_tx_ptr->status.status_word = 0;
/* enable this packet's dma */
current_tx_ptr->desc_a.config |= DMAEN;
/* tx dma is running, just return */
if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
goto out;
/* tx dma is not running */
bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a));
/* dma enabled, read from memory, size is 6 */
bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config);
/* Turn on the EMAC tx */
bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
out:
bfin_tx_hwtstamp(dev, skb);
current_tx_ptr = current_tx_ptr->next;
dev->stats.tx_packets++;
dev->stats.tx_bytes += (skb->len);
tx_reclaim_skb(lp);
return NETDEV_TX_OK;
}
#define IP_HEADER_OFF 0
#define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \
RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE)
static void bfin_mac_rx(struct net_device *dev)
{
struct sk_buff *skb, *new_skb;
unsigned short len;
struct bfin_mac_local *lp __maybe_unused = netdev_priv(dev);
#if defined(BFIN_MAC_CSUM_OFFLOAD)
unsigned int i;
unsigned char fcs[ETH_FCS_LEN + 1];
#endif
/* check if frame status word reports an error condition
* we which case we simply drop the packet
*/
if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
printk(KERN_NOTICE DRV_NAME
": rx: receive error - packet dropped\n");
dev->stats.rx_dropped++;
goto out;
}
/* allocate a new skb for next time receive */
skb = current_rx_ptr->skb;
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
if (!new_skb) {
printk(KERN_NOTICE DRV_NAME
": rx: low on mem - packet dropped\n");
dev->stats.rx_dropped++;
goto out;
}
/* reserve 2 bytes for RXDWA padding */
skb_reserve(new_skb, NET_IP_ALIGN);
/* Invidate the data cache of skb->data range when it is write back
* cache. It will prevent overwritting the new data from DMA
*/
blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
(unsigned long)new_skb->end);
current_rx_ptr->skb = new_skb;
current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
/* Deduce Ethernet FCS length from Ethernet payload length */
len -= ETH_FCS_LEN;
skb_put(skb, len);
skb->protocol = eth_type_trans(skb, dev);
bfin_rx_hwtstamp(dev, skb);
#if defined(BFIN_MAC_CSUM_OFFLOAD)
/* Checksum offloading only works for IPv4 packets with the standard IP header
* length of 20 bytes, because the blackfin MAC checksum calculation is
* based on that assumption. We must NOT use the calculated checksum if our
* IP version or header break that assumption.
*/
if (skb->data[IP_HEADER_OFF] == 0x45) {
skb->csum = current_rx_ptr->status.ip_payload_csum;
/*
* Deduce Ethernet FCS from hardware generated IP payload checksum.
* IP checksum is based on 16-bit one's complement algorithm.
* To deduce a value from checksum is equal to add its inversion.
* If the IP payload len is odd, the inversed FCS should also
* begin from odd address and leave first byte zero.
*/
if (skb->len % 2) {
fcs[0] = 0;
for (i = 0; i < ETH_FCS_LEN; i++)
fcs[i + 1] = ~skb->data[skb->len + i];
skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum);
} else {
for (i = 0; i < ETH_FCS_LEN; i++)
fcs[i] = ~skb->data[skb->len + i];
skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum);
}
skb->ip_summed = CHECKSUM_COMPLETE;
}
#endif
netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += len;
out:
current_rx_ptr->status.status_word = 0x00000000;
current_rx_ptr = current_rx_ptr->next;
}
/* interrupt routine to handle rx and error signal */
static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
int number = 0;
get_one_packet:
if (current_rx_ptr->status.status_word == 0) {
/* no more new packet received */
if (number == 0) {
if (current_rx_ptr->next->status.status_word != 0) {
current_rx_ptr = current_rx_ptr->next;
goto real_rx;
}
}
bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() |
DMA_DONE | DMA_ERR);
return IRQ_HANDLED;
}
real_rx:
bfin_mac_rx(dev);
number++;
goto get_one_packet;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static void bfin_mac_poll(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
disable_irq(IRQ_MAC_RX);
bfin_mac_interrupt(IRQ_MAC_RX, dev);
tx_reclaim_skb(lp);
enable_irq(IRQ_MAC_RX);
}
#endif /* CONFIG_NET_POLL_CONTROLLER */
static void bfin_mac_disable(void)
{
unsigned int opmode;
opmode = bfin_read_EMAC_OPMODE();
opmode &= (~RE);
opmode &= (~TE);
/* Turn off the EMAC */
bfin_write_EMAC_OPMODE(opmode);
}
/*
* Enable Interrupts, Receive, and Transmit
*/
static int bfin_mac_enable(void)
{
int ret;
u32 opmode;
pr_debug("%s: %s\n", DRV_NAME, __func__);
/* Set RX DMA */
bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config);
/* Wait MII done */
ret = bfin_mdio_poll();
if (ret)
return ret;
/* We enable only RX here */
/* ASTP : Enable Automatic Pad Stripping
PR : Promiscuous Mode for test
PSF : Receive frames with total length less than 64 bytes.
FDMODE : Full Duplex Mode
LB : Internal Loopback for test
RE : Receiver Enable */
opmode = bfin_read_EMAC_OPMODE();
if (opmode & FDMODE)
opmode |= PSF;
else
opmode |= DRO | DC | PSF;
opmode |= RE;
#if defined(CONFIG_BFIN_MAC_RMII)
opmode |= RMII; /* For Now only 100MBit are supported */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
opmode |= TE;
#endif
#endif
/* Turn on the EMAC rx */
bfin_write_EMAC_OPMODE(opmode);
return 0;
}
/* Our watchdog timed out. Called by the networking layer */
static void bfin_mac_timeout(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
pr_debug("%s: %s\n", dev->name, __func__);
bfin_mac_disable();
del_timer(&lp->tx_reclaim_timer);
/* reset tx queue and free skb */
while (tx_list_head != current_tx_ptr) {
tx_list_head->desc_a.config &= ~DMAEN;
tx_list_head->status.status_word = 0;
if (tx_list_head->skb) {
dev_kfree_skb(tx_list_head->skb);
tx_list_head->skb = NULL;
}
tx_list_head = tx_list_head->next;
}
if (netif_queue_stopped(lp->ndev))
netif_wake_queue(lp->ndev);
bfin_mac_enable();
/* We can accept TX packets again */
dev->trans_start = jiffies; /* prevent tx timeout */
netif_wake_queue(dev);
}
static void bfin_mac_multicast_hash(struct net_device *dev)
{
u32 emac_hashhi, emac_hashlo;
struct netdev_hw_addr *ha;
char *addrs;
u32 crc;
emac_hashhi = emac_hashlo = 0;
netdev_for_each_mc_addr(ha, dev) {
addrs = ha->addr;
/* skip non-multicast addresses */
if (!(*addrs & 1))
continue;
crc = ether_crc(ETH_ALEN, addrs);
crc >>= 26;
if (crc & 0x20)
emac_hashhi |= 1 << (crc & 0x1f);
else
emac_hashlo |= 1 << (crc & 0x1f);
}
bfin_write_EMAC_HASHHI(emac_hashhi);
bfin_write_EMAC_HASHLO(emac_hashlo);
}
/*
* This routine will, depending on the values passed to it,
* either make it accept multicast packets, go into
* promiscuous mode (for TCPDUMP and cousins) or accept
* a select set of multicast packets
*/
static void bfin_mac_set_multicast_list(struct net_device *dev)
{
u32 sysctl;
if (dev->flags & IFF_PROMISC) {
printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
sysctl = bfin_read_EMAC_OPMODE();
sysctl |= PR;
bfin_write_EMAC_OPMODE(sysctl);
} else if (dev->flags & IFF_ALLMULTI) {
/* accept all multicast */
sysctl = bfin_read_EMAC_OPMODE();
sysctl |= PAM;
bfin_write_EMAC_OPMODE(sysctl);
} else if (!netdev_mc_empty(dev)) {
/* set up multicast hash table */
sysctl = bfin_read_EMAC_OPMODE();
sysctl |= HM;
bfin_write_EMAC_OPMODE(sysctl);
bfin_mac_multicast_hash(dev);
} else {
/* clear promisc or multicast mode */
sysctl = bfin_read_EMAC_OPMODE();
sysctl &= ~(RAF | PAM);
bfin_write_EMAC_OPMODE(sysctl);
}
}
static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
switch (cmd) {
case SIOCSHWTSTAMP:
return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
default:
return -EOPNOTSUPP;
}
}
/*
* this puts the device in an inactive state
*/
static void bfin_mac_shutdown(struct net_device *dev)
{
/* Turn off the EMAC */
bfin_write_EMAC_OPMODE(0x00000000);
/* Turn off the EMAC RX DMA */
bfin_write_DMA1_CONFIG(0x0000);
bfin_write_DMA2_CONFIG(0x0000);
}
/*
* Open and Initialize the interface
*
* Set up everything, reset the card, etc..
*/
static int bfin_mac_open(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
int ret;
pr_debug("%s: %s\n", dev->name, __func__);
/*
* Check that the address is valid. If its not, refuse
* to bring the device up. The user must specify an
* address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
*/
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
return -EINVAL;
}
/* initial rx and tx list */
ret = desc_list_init();
if (ret)
return ret;
phy_start(lp->phydev);
phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
setup_system_regs(dev);
setup_mac_addr(dev->dev_addr);
bfin_mac_disable();
ret = bfin_mac_enable();
if (ret)
return ret;
pr_debug("hardware init finished\n");
netif_start_queue(dev);
netif_carrier_on(dev);
return 0;
}
/*
* this makes the board clean up everything that it can
* and not talk to the outside world. Caused by
* an 'ifconfig ethX down'
*/
static int bfin_mac_close(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
pr_debug("%s: %s\n", dev->name, __func__);
netif_stop_queue(dev);
netif_carrier_off(dev);
phy_stop(lp->phydev);
phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
/* clear everything */
bfin_mac_shutdown(dev);
/* free the rx/tx buffers */
desc_list_free();
return 0;
}
static const struct net_device_ops bfin_mac_netdev_ops = {
.ndo_open = bfin_mac_open,
.ndo_stop = bfin_mac_close,
.ndo_start_xmit = bfin_mac_hard_start_xmit,
.ndo_set_mac_address = bfin_mac_set_mac_address,
.ndo_tx_timeout = bfin_mac_timeout,
.ndo_set_multicast_list = bfin_mac_set_multicast_list,
.ndo_do_ioctl = bfin_mac_ioctl,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = bfin_mac_poll,
#endif
};
static int __devinit bfin_mac_probe(struct platform_device *pdev)
{
struct net_device *ndev;
struct bfin_mac_local *lp;
struct platform_device *pd;
int rc;
ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
if (!ndev) {
dev_err(&pdev->dev, "Cannot allocate net device!\n");
return -ENOMEM;
}
SET_NETDEV_DEV(ndev, &pdev->dev);
platform_set_drvdata(pdev, ndev);
lp = netdev_priv(ndev);
lp->ndev = ndev;
/* Grab the MAC address in the MAC */
*(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO());
*(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI());
/* probe mac */
/*todo: how to proble? which is revision_register */
bfin_write_EMAC_ADDRLO(0x12345678);
if (bfin_read_EMAC_ADDRLO() != 0x12345678) {
dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n");
rc = -ENODEV;
goto out_err_probe_mac;
}
/*
* Is it valid? (Did bootloader initialize it?)
* Grab the MAC from the board somehow
* this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c
*/
if (!is_valid_ether_addr(ndev->dev_addr))
bfin_get_ether_addr(ndev->dev_addr);
/* If still not valid, get a random one */
if (!is_valid_ether_addr(ndev->dev_addr))
random_ether_addr(ndev->dev_addr);
setup_mac_addr(ndev->dev_addr);
if (!pdev->dev.platform_data) {
dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
rc = -ENODEV;
goto out_err_probe_mac;
}
pd = pdev->dev.platform_data;
lp->mii_bus = platform_get_drvdata(pd);
if (!lp->mii_bus) {
dev_err(&pdev->dev, "Cannot get mii_bus!\n");
rc = -ENODEV;
goto out_err_mii_bus_probe;
}
lp->mii_bus->priv = ndev;
rc = mii_probe(ndev);
if (rc) {
dev_err(&pdev->dev, "MII Probe failed!\n");
goto out_err_mii_probe;
}
/* Fill in the fields of the device structure with ethernet values. */
ether_setup(ndev);
ndev->netdev_ops = &bfin_mac_netdev_ops;
ndev->ethtool_ops = &bfin_mac_ethtool_ops;
init_timer(&lp->tx_reclaim_timer);
lp->tx_reclaim_timer.data = (unsigned long)lp;
lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout;
spin_lock_init(&lp->lock);
/* now, enable interrupts */
/* register irq handler */
rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
IRQF_DISABLED, "EMAC_RX", ndev);
if (rc) {
dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
rc = -EBUSY;
goto out_err_request_irq;
}
rc = register_netdev(ndev);
if (rc) {
dev_err(&pdev->dev, "Cannot register net device!\n");
goto out_err_reg_ndev;
}
bfin_mac_hwtstamp_init(ndev);
/* now, print out the card info, in a short format.. */
dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
return 0;
out_err_reg_ndev:
free_irq(IRQ_MAC_RX, ndev);
out_err_request_irq:
out_err_mii_probe:
mdiobus_unregister(lp->mii_bus);
mdiobus_free(lp->mii_bus);
out_err_mii_bus_probe:
peripheral_free_list(pin_req);
out_err_probe_mac:
platform_set_drvdata(pdev, NULL);
free_netdev(ndev);
return rc;
}
static int __devexit bfin_mac_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct bfin_mac_local *lp = netdev_priv(ndev);
platform_set_drvdata(pdev, NULL);
lp->mii_bus->priv = NULL;
unregister_netdev(ndev);
free_irq(IRQ_MAC_RX, ndev);
free_netdev(ndev);
peripheral_free_list(pin_req);
return 0;
}
#ifdef CONFIG_PM
static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct bfin_mac_local *lp = netdev_priv(net_dev);
if (lp->wol) {
bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE);
bfin_write_EMAC_WKUP_CTL(MPKE);
enable_irq_wake(IRQ_MAC_WAKEDET);
} else {
if (netif_running(net_dev))
bfin_mac_close(net_dev);
}
return 0;
}
static int bfin_mac_resume(struct platform_device *pdev)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct bfin_mac_local *lp = netdev_priv(net_dev);
if (lp->wol) {
bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
bfin_write_EMAC_WKUP_CTL(0);
disable_irq_wake(IRQ_MAC_WAKEDET);
} else {
if (netif_running(net_dev))
bfin_mac_open(net_dev);
}
return 0;
}
#else
#define bfin_mac_suspend NULL
#define bfin_mac_resume NULL
#endif /* CONFIG_PM */
static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
{
struct mii_bus *miibus;
int rc, i;
/*
* We are setting up a network card,
* so set the GPIO pins to Ethernet mode
*/
rc = peripheral_request_list(pin_req, DRV_NAME);
if (rc) {
dev_err(&pdev->dev, "Requesting peripherals failed!\n");
return rc;
}
rc = -ENOMEM;
miibus = mdiobus_alloc();
if (miibus == NULL)
goto out_err_alloc;
miibus->read = bfin_mdiobus_read;
miibus->write = bfin_mdiobus_write;
miibus->reset = bfin_mdiobus_reset;
miibus->parent = &pdev->dev;
miibus->name = "bfin_mii_bus";
snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
if (miibus->irq == NULL)
goto out_err_alloc;
for (i = 0; i < PHY_MAX_ADDR; ++i)
miibus->irq[i] = PHY_POLL;
rc = mdiobus_register(miibus);
if (rc) {
dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
goto out_err_mdiobus_register;
}
platform_set_drvdata(pdev, miibus);
return 0;
out_err_mdiobus_register:
kfree(miibus->irq);
mdiobus_free(miibus);
out_err_alloc:
peripheral_free_list(pin_req);
return rc;
}
static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
{
struct mii_bus *miibus = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
mdiobus_unregister(miibus);
kfree(miibus->irq);
mdiobus_free(miibus);
peripheral_free_list(pin_req);
return 0;
}
static struct platform_driver bfin_mii_bus_driver = {
.probe = bfin_mii_bus_probe,
.remove = __devexit_p(bfin_mii_bus_remove),
.driver = {
.name = "bfin_mii_bus",
.owner = THIS_MODULE,
},
};
static struct platform_driver bfin_mac_driver = {
.probe = bfin_mac_probe,
.remove = __devexit_p(bfin_mac_remove),
.resume = bfin_mac_resume,
.suspend = bfin_mac_suspend,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
static int __init bfin_mac_init(void)
{
int ret;
ret = platform_driver_register(&bfin_mii_bus_driver);
if (!ret)
return platform_driver_register(&bfin_mac_driver);
return -ENODEV;
}
module_init(bfin_mac_init);
static void __exit bfin_mac_cleanup(void)
{
platform_driver_unregister(&bfin_mac_driver);
platform_driver_unregister(&bfin_mii_bus_driver);
}
module_exit(bfin_mac_cleanup);