davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3e92501a4e
kernel-ark/include/asm-sh/r7780rp.h
Magnus Damm da2d7f4bc5 sh: update r7780rp interrupt code 
This patch updates the board specific irq code for r7780rp. The new code is
very similar to the other highlander implementations, with the exception that
the r7780rp handles pci interrupts using IRL. To simplify the pci code and
use the same interrupt numbers as r7780mp and r7785rp we hook in to the
cpu specific pci vectors.

The pci interrupts and the push switch all work well with and without this
patch. CF and AX88796 are not ok though and the source of the problem is
unknown at this point. The AX88796 does for not detect it's proper mac
address (IPL gets it right) and the kernel hangs on CF access. As a workaround
this patch removes the CF and the AX88796 from the platform datain case of
r7780rp.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 16:24:01 +09:00

202 lines
9.6 KiB
C
Raw Blame History

#ifndef __ASM_SH_RENESAS_R7780RP_H
#define __ASM_SH_RENESAS_R7780RP_H
/* Box specific addresses. */
#if defined(CONFIG_SH_R7780MP)
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_SDPOW (-1)
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
#define PA_ICCR (PA_BCR+0x0600) /* Serial control */
#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
#define PA_PMR (PA_BCR+0x0900) /* */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IVDR_CK_ON 8 /* iVDR Clock ON */
#elif defined(CONFIG_SH_R7780RP)
#define PA_POFF (-1)
#define PA_BCR 0xa5000000 /* FPGA */
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
#define PA_ICCR (PA_BCR+0x0500) /* Serial control */
#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
#define PA_AX88796L 0xa5800400 /* AX88796L Area */
#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IVDR_CK_ON 8 /* iVDR Clock ON */
#elif defined(CONFIG_SH_R7785RP)
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_SDPOW (-1)
#define PA_PCISCR (PA_BCR+0x0000)
#define PA_IRLPRA (PA_BCR+0x0002)
#define PA_IRLPRB (PA_BCR+0x0004)
#define PA_IRLPRC (PA_BCR+0x0006)
#define PA_IRLPRD (PA_BCR+0x0008)
#define IRLCNTR1 (PA_BCR+0x0010)
#define PA_IRLPRE (PA_BCR+0x000a)
#define PA_IRLPRF (PA_BCR+0x000c)
#define PA_EXIRLCR (PA_BCR+0x000e)
#define PA_IRLMCR1 (PA_BCR+0x0010)
#define PA_IRLMCR2 (PA_BCR+0x0012)
#define PA_IRLSSR1 (PA_BCR+0x0014)
#define PA_IRLSSR2 (PA_BCR+0x0016)
#define PA_CFTCR (PA_BCR+0x0100)
#define PA_CFPCR (PA_BCR+0x0102)
#define PA_PCICR (PA_BCR+0x0110)
#define PA_IVDRCTL (PA_BCR+0x0112)
#define PA_IVDRSR (PA_BCR+0x0114)
#define PA_PDRSTCR (PA_BCR+0x0116)
#define PA_POFF (PA_BCR+0x0120)
#define PA_LCDCR (PA_BCR+0x0130)
#define PA_TPCR (PA_BCR+0x0140)
#define PA_TPCKCR (PA_BCR+0x0142)
#define PA_TPRSTR (PA_BCR+0x0144)
#define PA_TPXPDR (PA_BCR+0x0146)
#define PA_TPYPDR (PA_BCR+0x0148)
#define PA_GPIOPFR (PA_BCR+0x0150)
#define PA_GPIODR (PA_BCR+0x0152)
#define PA_OBLED (PA_BCR+0x0154)
#define PA_SWSR (PA_BCR+0x0156)
#define PA_VERREG (PA_BCR+0x0158)
#define PA_SMCR (PA_BCR+0x0200)
#define PA_SMSMADR (PA_BCR+0x0202)
#define PA_SMMR (PA_BCR+0x0204)
#define PA_SMSADR1 (PA_BCR+0x0206)
#define PA_SMSADR32 (PA_BCR+0x0244)
#define PA_SMTRDR1 (PA_BCR+0x0246)
#define PA_SMTRDR16 (PA_BCR+0x0264)
#define PA_CU3MDR (PA_BCR+0x0300)
#define PA_CU5MDR (PA_BCR+0x0302)
#define PA_MMSR (PA_BCR+0x0400)
#define IVDR_CK_ON 4 /* iVDR Clock ON */
#endif
#define HL_FPGA_IRQ_BASE 200
#define HL_NR_IRL 15
#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3)
#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4)
#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5)
#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6)
#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7)
#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8)
#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9)
#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10)
#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11)
#define IRQ_TP (HL_FPGA_IRQ_BASE + 12)
#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13)
#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14)
unsigned char *highlander_init_irq_r7780mp(void);
unsigned char *highlander_init_irq_r7780rp(void);
unsigned char *highlander_init_irq_r7785rp(void);
#define __IO_PREFIX r7780rp
#include <asm/io_generic.h>
#endif /* __ASM_SH_RENESAS_R7780RP */
Reference in New Issue View Git Blame Copy Permalink