3c8464a9b1
This processor/memory module was mostly used on ATCA blades and before that, on cPCI blades. It wasn't really user friendly, with custom non u-boot bootloaders (powerboot/motload) and no real way to recover corrupted boot flash (which was a common problem). As such, it had its day back before the big ppc --> powerpc move to device trees, and that was largely through commercial BSPs that started to dry up around 2007. Systems using one were largely in a "deploy and sustain" mode, so interest in upgrading to new kernels in the field was nil. Also, requiring 50A, 48V power supplies and a 2'x2'x2' ATCA chassis largely rules out any hobbyist/enthusiast interest. The point of all this, is that we might as well delete the in kernel files relating to this platform. No point in continuing to build it via walking the defconfigs or via linux-next testing. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
435 lines
17 KiB
Makefile
435 lines
17 KiB
Makefile
# Makefile for making ELF bootable images for booting on CHRP
|
|
# using Open Firmware.
|
|
#
|
|
# Geert Uytterhoeven September 1997
|
|
#
|
|
# Based on coffboot by Paul Mackerras
|
|
# Simplified for ppc64 by Todd Inglett
|
|
#
|
|
# NOTE: this code is built for 32 bit in ELF32 format even though
|
|
# it packages a 64 bit kernel. We do this to simplify the
|
|
# bootloader and increase compatibility with OpenFirmware.
|
|
#
|
|
# To this end we need to define BOOTCC, etc, as the tools
|
|
# needed to build the 32 bit image. That's normally the same
|
|
# compiler for the rest of the kernel, with the -m32 flag added.
|
|
# To make it easier to setup a cross compiler,
|
|
# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
|
|
# in the toplevel makefile.
|
|
|
|
all: $(obj)/zImage
|
|
|
|
BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
|
|
-fno-strict-aliasing -Os -msoft-float -pipe \
|
|
-fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
|
|
-isystem $(shell $(CROSS32CC) -print-file-name=include) \
|
|
-mbig-endian
|
|
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
|
|
|
|
ifdef CONFIG_DEBUG_INFO
|
|
BOOTCFLAGS += -g
|
|
endif
|
|
|
|
ifeq ($(call cc-option-yn, -fstack-protector),y)
|
|
BOOTCFLAGS += -fno-stack-protector
|
|
endif
|
|
|
|
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
|
|
|
|
DTC_FLAGS ?= -p 1024
|
|
|
|
$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
|
|
|
|
|
|
zlib := inffast.c inflate.c inftrees.c
|
|
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
|
|
zliblinuxheader := zlib.h zconf.h zutil.h
|
|
|
|
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
|
|
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
|
|
|
|
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
|
|
libfdtheader := fdt.h libfdt.h libfdt_internal.h
|
|
|
|
$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
|
|
$(addprefix $(obj)/,$(libfdtheader))
|
|
|
|
src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
|
|
$(libfdt) libfdt-wrapper.c \
|
|
ns16550.c serial.c simple_alloc.c div64.S util.S \
|
|
gunzip_util.c elf_util.c $(zlib) devtree.c stdlib.c \
|
|
oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
|
|
uartlite.c mpc52xx-psc.c
|
|
src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
|
|
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
|
|
src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
|
|
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
|
|
src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
|
|
|
|
src-plat-y := of.c epapr.c
|
|
src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
|
|
treeboot-walnut.c cuboot-acadia.c \
|
|
cuboot-kilauea.c simpleboot.c \
|
|
virtex405-head.S virtex.c
|
|
src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
|
|
cuboot-bamboo.c cuboot-sam440ep.c \
|
|
cuboot-sequoia.c cuboot-rainier.c \
|
|
cuboot-taishan.c cuboot-katmai.c \
|
|
cuboot-warp.c cuboot-yosemite.c \
|
|
treeboot-iss4xx.c treeboot-currituck.c \
|
|
simpleboot.c fixed-head.S virtex.c
|
|
src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
|
|
src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
|
|
src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
|
|
src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
|
|
src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
|
|
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
|
|
cuboot-c2k.c gamecube-head.S \
|
|
gamecube.c wii-head.S wii.c holly.c \
|
|
fixed-head.S mvme5100.c
|
|
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
|
|
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
|
|
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
|
|
|
|
src-wlib := $(sort $(src-wlib-y))
|
|
src-plat := $(sort $(src-plat-y))
|
|
src-boot := $(src-wlib) $(src-plat) empty.c
|
|
|
|
src-boot := $(addprefix $(obj)/, $(src-boot))
|
|
obj-boot := $(addsuffix .o, $(basename $(src-boot)))
|
|
obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
|
|
obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
|
|
obj-plat: $(libfdt)
|
|
|
|
quiet_cmd_copy_zlib = COPY $@
|
|
cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
|
|
|
|
quiet_cmd_copy_zlibheader = COPY $@
|
|
cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
|
|
# stddef.h for NULL
|
|
quiet_cmd_copy_zliblinuxheader = COPY $@
|
|
cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
|
|
|
|
$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
|
|
$(call cmd,copy_zlib)
|
|
|
|
$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
|
|
$(call cmd,copy_zlibheader)
|
|
|
|
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
|
|
$(call cmd,copy_zliblinuxheader)
|
|
|
|
quiet_cmd_copy_libfdt = COPY $@
|
|
cmd_copy_libfdt = cp $< $@
|
|
|
|
$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
|
|
$(call cmd,copy_libfdt)
|
|
|
|
$(obj)/empty.c:
|
|
@touch $@
|
|
|
|
$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
|
|
@cp $< $@
|
|
|
|
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
|
|
$(libfdt) $(libfdtheader) \
|
|
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
|
|
|
|
quiet_cmd_bootcc = BOOTCC $@
|
|
cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
|
|
|
|
quiet_cmd_bootas = BOOTAS $@
|
|
cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
|
|
|
|
quiet_cmd_bootar = BOOTAR $@
|
|
cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
|
|
|
|
$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
|
|
$(call if_changed_dep,bootcc)
|
|
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
|
|
$(Q)mkdir -p $(dir $@)
|
|
$(call if_changed_dep,bootcc)
|
|
$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
|
|
$(Q)mkdir -p $(dir $@)
|
|
$(call if_changed_dep,bootas)
|
|
|
|
$(obj)/wrapper.a: $(obj-wlib) FORCE
|
|
$(call if_changed,bootar)
|
|
|
|
hostprogs-y := addnote hack-coff mktree
|
|
|
|
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
|
|
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
|
|
$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
|
|
|
|
dtstree := $(srctree)/$(src)/dts
|
|
|
|
wrapper :=$(srctree)/$(src)/wrapper
|
|
wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
|
|
$(wrapper) FORCE
|
|
|
|
#############
|
|
# Bits for building various flavours of zImage
|
|
|
|
ifneq ($(CROSS32_COMPILE),)
|
|
CROSSWRAP := -C "$(CROSS32_COMPILE)"
|
|
else
|
|
ifneq ($(CROSS_COMPILE),)
|
|
CROSSWRAP := -C "$(CROSS_COMPILE)"
|
|
endif
|
|
endif
|
|
|
|
# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
|
|
quiet_cmd_wrap = WRAP $@
|
|
cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
|
|
$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
|
|
|
|
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
|
|
image-$(CONFIG_PPC_POWERNV) += zImage.pseries
|
|
image-$(CONFIG_PPC_MAPLE) += zImage.maple
|
|
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
|
|
image-$(CONFIG_PPC_PS3) += dtbImage.ps3
|
|
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
|
|
image-$(CONFIG_PPC_CELL_QPACE) += zImage.pseries
|
|
image-$(CONFIG_PPC_CHRP) += zImage.chrp
|
|
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
|
|
image-$(CONFIG_PPC_PMAC) += zImage.pmac
|
|
image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
|
|
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
|
|
image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
|
|
|
|
#
|
|
# Targets which embed a device tree blob
|
|
#
|
|
# Theses are default targets to build images which embed device tree blobs.
|
|
# They are only required on boards which do not have FDT support in firmware.
|
|
# Boards with newish u-boot firmware can use the uImage target above
|
|
#
|
|
|
|
# Board ports in arch/powerpc/platform/40x/Kconfig
|
|
image-$(CONFIG_EP405) += dtbImage.ep405
|
|
image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
|
|
image-$(CONFIG_WALNUT) += treeImage.walnut
|
|
image-$(CONFIG_ACADIA) += cuImage.acadia
|
|
image-$(CONFIG_OBS600) += uImage.obs600
|
|
|
|
# Board ports in arch/powerpc/platform/44x/Kconfig
|
|
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
|
|
image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo
|
|
image-$(CONFIG_SAM440EP) += cuImage.sam440ep
|
|
image-$(CONFIG_SEQUOIA) += cuImage.sequoia
|
|
image-$(CONFIG_RAINIER) += cuImage.rainier
|
|
image-$(CONFIG_TAISHAN) += cuImage.taishan
|
|
image-$(CONFIG_KATMAI) += cuImage.katmai
|
|
image-$(CONFIG_WARP) += cuImage.warp
|
|
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
|
|
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
|
|
treeImage.iss4xx-mpic
|
|
image-$(CONFIG_CURRITUCK) += treeImage.currituck
|
|
|
|
# Board ports in arch/powerpc/platform/8xx/Kconfig
|
|
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
|
|
image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads
|
|
image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc
|
|
image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
|
|
dtbImage.adder875-redboot
|
|
|
|
# Board ports in arch/powerpc/platform/52xx/Kconfig
|
|
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb
|
|
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb
|
|
image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb
|
|
|
|
# Board ports in arch/powerpc/platform/82xx/Kconfig
|
|
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
|
|
image-$(CONFIG_PQ2FADS) += cuImage.pq2fads
|
|
image-$(CONFIG_EP8248E) += dtbImage.ep8248e
|
|
|
|
# Board ports in arch/powerpc/platform/83xx/Kconfig
|
|
image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds
|
|
image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb
|
|
image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \
|
|
cuImage.mpc8349emitxgp
|
|
image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
|
|
image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
|
|
image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
|
|
|
|
# Board ports in arch/powerpc/platform/85xx/Kconfig
|
|
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
|
|
image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads
|
|
image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \
|
|
cuImage.mpc8548cds_32b \
|
|
cuImage.mpc8555cds
|
|
image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds
|
|
image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \
|
|
cuImage.mpc8572ds
|
|
image-$(CONFIG_TQM8540) += cuImage.tqm8540
|
|
image-$(CONFIG_TQM8541) += cuImage.tqm8541
|
|
image-$(CONFIG_TQM8548) += cuImage.tqm8548
|
|
image-$(CONFIG_TQM8555) += cuImage.tqm8555
|
|
image-$(CONFIG_TQM8560) += cuImage.tqm8560
|
|
image-$(CONFIG_SBC8548) += cuImage.sbc8548
|
|
image-$(CONFIG_KSI8560) += cuImage.ksi8560
|
|
|
|
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
|
|
image-$(CONFIG_STORCENTER) += cuImage.storcenter
|
|
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
|
|
image-$(CONFIG_PPC_C2K) += cuImage.c2k
|
|
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
|
|
image-$(CONFIG_WII) += dtbImage.wii
|
|
image-$(CONFIG_MVME5100) += dtbImage.mvme5100
|
|
|
|
# Board port in arch/powerpc/platform/amigaone/Kconfig
|
|
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
|
|
|
|
# For 32-bit powermacs, build the COFF and miboot images
|
|
# as well as the ELF images.
|
|
ifeq ($(CONFIG_PPC32),y)
|
|
image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot
|
|
endif
|
|
|
|
# Allow extra targets to be added to the defconfig
|
|
image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS))
|
|
|
|
initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
|
|
initrd-y := $(patsubst zImage%, zImage.initrd%, \
|
|
$(patsubst dtbImage%, dtbImage.initrd%, \
|
|
$(patsubst simpleImage%, simpleImage.initrd%, \
|
|
$(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
|
|
initrd-y := $(filter-out $(image-y), $(initrd-y))
|
|
targets += $(image-y) $(initrd-y)
|
|
|
|
$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
|
|
|
|
# Don't put the ramdisk on the pattern rule; when its missing make will try
|
|
# the pattern rule with less dependencies that also matches (even with the
|
|
# hard dependency listed).
|
|
$(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
|
|
$(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/zImage.%: vmlinux $(wrapperbits)
|
|
$(call if_changed,wrap,$*)
|
|
|
|
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
|
|
$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
|
|
$(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
|
|
$(call if_changed,wrap,$*,,$(obj)/$*.dtb)
|
|
|
|
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
|
|
# prefix
|
|
$(obj)/vmlinux.strip: vmlinux
|
|
$(STRIP) -s -R .comment $< -o $@
|
|
|
|
$(obj)/uImage: vmlinux $(wrapperbits)
|
|
$(call if_changed,wrap,uboot)
|
|
|
|
$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
|
|
|
|
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
|
|
|
|
$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
|
|
|
|
$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
|
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
|
|
|
|
# Rule to build device tree blobs
|
|
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
|
|
$(call if_changed_dep,dtc)
|
|
|
|
# If there isn't a platform selected then just strip the vmlinux.
|
|
ifeq (,$(image-y))
|
|
image-y := vmlinux.strip
|
|
endif
|
|
|
|
$(obj)/zImage: $(addprefix $(obj)/, $(image-y))
|
|
@rm -f $@; ln $< $@
|
|
$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
|
|
@rm -f $@; ln $< $@
|
|
|
|
install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
|
|
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
|
|
|
|
# anything not in $(targets)
|
|
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
|
|
zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
|
|
zImage.miboot zImage.pmac zImage.pseries \
|
|
zImage.maple simpleImage.* otheros.bld *.dtb
|
|
|
|
# clean up files cached by wrapper
|
|
clean-kernel := vmlinux.strip vmlinux.bin
|
|
clean-kernel += $(addsuffix .gz,$(clean-kernel))
|
|
# If not absolute clean-files are relative to $(obj).
|
|
clean-files += $(addprefix $(objtree)/, $(clean-kernel))
|
|
|
|
WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
|
|
WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
|
|
WRAPPER_BINDIR := /usr/sbin
|
|
INSTALL := install
|
|
|
|
extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
|
|
hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
|
|
wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
|
|
dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
|
|
|
|
all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
|
|
|
|
quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
|
|
cmd_mkdir = mkdir -p $@
|
|
|
|
quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
|
|
cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
|
|
|
|
quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
|
|
cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
|
|
|
|
quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
|
|
cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
|
|
|
|
quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
|
|
cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
|
|
sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
|
|
-e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
|
|
|
|
|
|
$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
|
|
$(call cmd,mkdir)
|
|
|
|
$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
|
|
$(call cmd,install)
|
|
|
|
$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
|
|
$(call cmd,install_exe)
|
|
|
|
$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
|
|
$(call cmd,install_dts)
|
|
|
|
$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
|
|
$(call cmd,install_wrapper)
|
|
|
|
$(obj)/bootwrapper_install: $(all-installed)
|