davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3c31998529
kernel-ark/arch/arm/mach-pxa/vpac270.c
Sebastian Andrzej Siewior b459396ee9 ARM: pxa2xx: reorganize I2C files 
This patch moves the platform data definition from
arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so
it can be accessed from x86 the same way as on ARM.

This change should make no functional change to the PXA code. The move
is verified by building the following defconfigs:
  cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
  imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
  raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig
  pxa910_defconfig

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-21 09:09:33 +00:00

726 lines
17 KiB
C
Raw Blame History

/*
* Hardware definitions for Voipac PXA270
*
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/onenand.h>
#include <linux/dm9000.h>
#include <linux/ucb1400.h>
#include <linux/ata_platform.h>
#include <linux/regulator/max1586.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/vpac270.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pata_pxa.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static unsigned long vpac270_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO53_GPIO, /* SD detect */
GPIO52_GPIO, /* SD r/o switch */
/* GPIO KEYS */
GPIO1_GPIO, /* USER BTN */
/* LEDs */
GPIO15_GPIO, /* orange led */
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
GPIO27_FFUART_RTS,
GPIO100_FFUART_CTS,
GPIO33_FFUART_DSR,
GPIO40_FFUART_DTR,
GPIO10_FFUART_DCD,
GPIO38_FFUART_RI,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO86_LCD_LDD_16,
GPIO87_LCD_LDD_17,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* PCMCIA */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO55_nPREG,
GPIO57_nIOIS16,
GPIO56_nPWAIT,
GPIO104_PSKTSEL,
GPIO84_GPIO, /* PCMCIA CD */
GPIO35_GPIO, /* PCMCIA RDY */
GPIO107_GPIO, /* PCMCIA PPEN */
GPIO11_GPIO, /* PCMCIA RESET */
GPIO17_GPIO, /* CF CD */
GPIO12_GPIO, /* CF RDY */
GPIO16_GPIO, /* CF RESET */
/* UHC */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
GPIO119_USBH2_PWR,
GPIO120_USBH2_PEN,
/* UDC */
GPIO41_GPIO,
/* Ethernet */
GPIO114_GPIO, /* IRQ */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO95_AC97_nRESET,
GPIO98_AC97_SYSCLK,
GPIO113_GPIO, /* TS IRQ */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* IDE */
GPIO36_GPIO, /* IDE IRQ */
GPIO80_DREQ_1,
};
/******************************************************************************
* NOR Flash
******************************************************************************/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition vpac270_nor_partitions[] = {
{
.name = "Flash",
.offset = 0x00000000,
.size = MTDPART_SIZ_FULL,
}
};
static struct physmap_flash_data vpac270_flash_data[] = {
{
.width = 2, /* bankwidth in bytes */
.parts = vpac270_nor_partitions,
.nr_parts = ARRAY_SIZE(vpac270_nor_partitions)
}
};
static struct resource vpac270_flash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device vpac270_flash = {
.name = "physmap-flash",
.id = 0,
.resource = &vpac270_flash_resource,
.num_resources = 1,
.dev = {
.platform_data = vpac270_flash_data,
},
};
static void __init vpac270_nor_init(void)
{
platform_device_register(&vpac270_flash);
}
#else
static inline void vpac270_nor_init(void) {}
#endif
/******************************************************************************
* OneNAND Flash
******************************************************************************/
#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
static struct mtd_partition vpac270_onenand_partitions[] = {
{
.name = "Flash",
.offset = 0x00000000,
.size = MTDPART_SIZ_FULL,
}
};
static struct onenand_platform_data vpac270_onenand_info = {
.parts = vpac270_onenand_partitions,
.nr_parts = ARRAY_SIZE(vpac270_onenand_partitions),
};
static struct resource vpac270_onenand_resources[] = {
[0] = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_1M,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device vpac270_onenand = {
.name = "onenand-flash",
.id = -1,
.resource = vpac270_onenand_resources,
.num_resources = ARRAY_SIZE(vpac270_onenand_resources),
.dev = {
.platform_data = &vpac270_onenand_info,
},
};
static void __init vpac270_onenand_init(void)
{
platform_device_register(&vpac270_onenand);
}
#else
static void __init vpac270_onenand_init(void) {}
#endif
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data vpac270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
.gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
.detect_delay_ms = 200,
};
static void __init vpac270_mmc_init(void)
{
pxa_set_mci_info(&vpac270_mci_platform_data);
}
#else
static inline void vpac270_mmc_init(void) {}
#endif
/******************************************************************************
* GPIO keys
******************************************************************************/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button vpac270_pxa_buttons[] = {
{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
};
static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
.buttons = vpac270_pxa_buttons,
.nbuttons = ARRAY_SIZE(vpac270_pxa_buttons),
};
static struct platform_device vpac270_pxa_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &vpac270_pxa_keys_data,
},
};
static void __init vpac270_keys_init(void)
{
platform_device_register(&vpac270_pxa_keys);
}
#else
static inline void vpac270_keys_init(void) {}
#endif
/******************************************************************************
* LED
******************************************************************************/
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
struct gpio_led vpac270_gpio_leds[] = {
{
.name = "vpac270:orange:user",
.default_trigger = "none",
.gpio = GPIO15_VPAC270_LED_ORANGE,
.active_low = 1,
}
};
static struct gpio_led_platform_data vpac270_gpio_led_info = {
.leds = vpac270_gpio_leds,
.num_leds = ARRAY_SIZE(vpac270_gpio_leds),
};
static struct platform_device vpac270_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &vpac270_gpio_led_info,
}
};
static void __init vpac270_leds_init(void)
{
platform_device_register(&vpac270_leds);
}
#else
static inline void vpac270_leds_init(void) {}
#endif
/******************************************************************************
* USB Host
******************************************************************************/
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int vpac270_ohci_init(struct device *dev)
{
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
return 0;
}
static struct pxaohci_platform_data vpac270_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT2 |
POWER_CONTROL_LOW | POWER_SENSE_LOW,
.init = vpac270_ohci_init,
};
static void __init vpac270_uhc_init(void)
{
pxa_set_ohci_info(&vpac270_ohci_info);
}
#else
static inline void vpac270_uhc_init(void) {}
#endif
/******************************************************************************
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
.gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
.gpio_pullup = -1,
};
static struct platform_device vpac270_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
.dev = {
.platform_data = &vpac270_gpio_vbus_info,
},
};
static void vpac270_udc_command(int cmd)
{
if (cmd == PXA2XX_UDC_CMD_CONNECT)
UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
UP2OCR = UP2OCR_HXOE;
}
static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
.udc_command = vpac270_udc_command,
.gpio_pullup = -1,
};
static void __init vpac270_udc_init(void)
{
pxa_set_udc_info(&vpac270_udc_info);
platform_device_register(&vpac270_gpio_vbus);
}
#else
static inline void vpac270_udc_init(void) {}
#endif
/******************************************************************************
* Ethernet
******************************************************************************/
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource vpac270_dm9000_resources[] = {
[0] = {
.start = PXA_CS2_PHYS + 0x300,
.end = PXA_CS2_PHYS + 0x303,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_CS2_PHYS + 0x304,
.end = PXA_CS2_PHYS + 0x343,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
.end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
static struct dm9000_plat_data vpac270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
static struct platform_device vpac270_dm9000_device = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(vpac270_dm9000_resources),
.resource = vpac270_dm9000_resources,
.dev = {
.platform_data = &vpac270_dm9000_platdata,
}
};
static void __init vpac270_eth_init(void)
{
platform_device_register(&vpac270_dm9000_device);
}
#else
static inline void vpac270_eth_init(void) {}
#endif
/******************************************************************************
* Audio and Touchscreen
******************************************************************************/
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
.reset_gpio = 95,
};
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
.irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
};
static struct platform_device vpac270_ucb1400_device = {
.name = "ucb1400_core",
.id = -1,
.dev = {
.platform_data = &vpac270_ucb1400_pdata,
},
};
static void __init vpac270_ts_init(void)
{
pxa_set_ac97_info(&vpac270_ac97_pdata);
platform_device_register(&vpac270_ucb1400_device);
}
#else
static inline void vpac270_ts_init(void) {}
#endif
/******************************************************************************
* RTC
******************************************************************************/
#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
{
I2C_BOARD_INFO("ds1339", 0x68),
},
};
static void __init vpac270_rtc_init(void)
{
i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
}
#else
static inline void vpac270_rtc_init(void) {}
#endif
/******************************************************************************
* Framebuffer
******************************************************************************/
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info vpac270_lcd_modes[] = {
{
.pixclock = 57692,
.xres = 640,
.yres = 480,
.bpp = 32,
.depth = 18,
.left_margin = 144,
.right_margin = 32,
.upper_margin = 13,
.lower_margin = 30,
.hsync_len = 32,
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
}, { /* CRT 640x480 */
.pixclock = 35000,
.xres = 640,
.yres = 480,
.bpp = 16,
.depth = 16,
.left_margin = 96,
.right_margin = 48,
.upper_margin = 33,
.lower_margin = 10,
.hsync_len = 48,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
}, { /* CRT 800x600 H=30kHz V=48HZ */
.pixclock = 25000,
.xres = 800,
.yres = 600,
.bpp = 16,
.depth = 16,
.left_margin = 50,
.right_margin = 1,
.upper_margin = 21,
.lower_margin = 12,
.hsync_len = 8,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
}, { /* CRT 1024x768 H=40kHz V=50Hz */
.pixclock = 15000,
.xres = 1024,
.yres = 768,
.bpp = 16,
.depth = 16,
.left_margin = 220,
.right_margin = 8,
.upper_margin = 33,
.lower_margin = 2,
.hsync_len = 48,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
}
};
static struct pxafb_mach_info vpac270_lcd_screen = {
.modes = vpac270_lcd_modes,
.num_modes = ARRAY_SIZE(vpac270_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_18BPP,
};
static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
{
gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
}
static void __init vpac270_lcd_init(void)
{
int ret;
ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
if (ret) {
pr_err("Requesting BKL-ON GPIO failed!\n");
goto err;
}
ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
if (ret) {
pr_err("Setting BKL-ON GPIO direction failed!\n");
goto err2;
}
vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
set_pxa_fb_info(&vpac270_lcd_screen);
return;
err2:
gpio_free(GPIO81_VPAC270_BKL_ON);
err:
return;
}
#else
static inline void vpac270_lcd_init(void) {}
#endif
/******************************************************************************
* PATA IDE
******************************************************************************/
#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
static struct pata_pxa_pdata vpac270_pata_pdata = {
.reg_shift = 1,
.dma_dreq = 1,
.irq_flags = IRQF_TRIGGER_RISING,
};
static struct resource vpac270_ide_resources[] = {
[0] = { /* I/O Base address */
.start = PXA_CS3_PHYS + 0x120,
.end = PXA_CS3_PHYS + 0x13f,
.flags = IORESOURCE_MEM
},
[1] = { /* CTL Base address */
.start = PXA_CS3_PHYS + 0x15c,
.end = PXA_CS3_PHYS + 0x15f,
.flags = IORESOURCE_MEM
},
[2] = { /* DMA Base address */
.start = PXA_CS3_PHYS + 0x20,
.end = PXA_CS3_PHYS + 0x2f,
.flags = IORESOURCE_DMA
},
[3] = { /* IDE IRQ pin */
.start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
.end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
.flags = IORESOURCE_IRQ
}
};
static struct platform_device vpac270_ide_device = {
.name = "pata_pxa",
.num_resources = ARRAY_SIZE(vpac270_ide_resources),
.resource = vpac270_ide_resources,
.dev = {
.platform_data = &vpac270_pata_pdata,
.coherent_dma_mask = 0xffffffff,
}
};
static void __init vpac270_ide_init(void)
{
platform_device_register(&vpac270_ide_device);
}
#else
static inline void vpac270_ide_init(void) {}
#endif
/******************************************************************************
* Core power regulator
******************************************************************************/
#if defined(CONFIG_REGULATOR_MAX1586) || \
defined(CONFIG_REGULATOR_MAX1586_MODULE)
static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
{
.supply = "vcc_core",
}
};
static struct regulator_init_data vpac270_max1587a_v3_info = {
.constraints = {
.name = "vcc_core range",
.min_uV = 900000,
.max_uV = 1705000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.consumer_supplies = vpac270_max1587a_consumers,
.num_consumer_supplies = ARRAY_SIZE(vpac270_max1587a_consumers),
};
static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
{
.name = "vcc_core",
.id = MAX1586_V3,
.platform_data = &vpac270_max1587a_v3_info,
}
};
static struct max1586_platform_data vpac270_max1587a_info = {
.subdevs = vpac270_max1587a_subdevs,
.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
.v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
};
static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
{
I2C_BOARD_INFO("max1586", 0x14),
.platform_data = &vpac270_max1587a_info,
},
};
static void __init vpac270_pmic_init(void)
{
i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
}
#else
static inline void vpac270_pmic_init(void) {}
#endif
/******************************************************************************
* Machine init
******************************************************************************/
static void __init vpac270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
pxa27x_set_i2c_power_info(NULL);
vpac270_pmic_init();
vpac270_lcd_init();
vpac270_mmc_init();
vpac270_nor_init();
vpac270_onenand_init();
vpac270_leds_init();
vpac270_keys_init();
vpac270_uhc_init();
vpac270_udc_init();
vpac270_eth_init();
vpac270_ts_init();
vpac270_rtc_init();
vpac270_ide_init();
}
MACHINE_START(VPAC270, "Voipac PXA270")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = vpac270_init
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink