kernel-ark/drivers/ide/pci/rz1000.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

92 lines
2.3 KiB
C

/*
* linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
*
* Copyright (C) 1995-1998 Linus Torvalds & author (see below)
*/
/*
* Principal Author: mlord@pobox.com (Mark Lord)
*
* See linux/MAINTAINERS for address of current maintainer.
*
* This file provides support for disabling the buggy read-ahead
* mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
*
* Dunno if this fixes both ports, or only the primary port (?).
*/
#undef REALLY_SLOW_IO /* most systems can safely undef this */
#include <linux/config.h> /* for CONFIG_BLK_DEV_IDEPCI */
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/io.h>
static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
{
u16 reg;
struct pci_dev *dev = hwif->pci_dev;
hwif->chipset = ide_rz1000;
if (!pci_read_config_word (dev, 0x40, &reg) &&
!pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
printk(KERN_INFO "%s: disabled chipset read-ahead "
"(buggy RZ1000/RZ1001)\n", hwif->name);
} else {
hwif->serialized = 1;
hwif->drives[0].no_unmask = 1;
hwif->drives[1].no_unmask = 1;
printk(KERN_INFO "%s: serialized, disabled unmasking "
"(buggy RZ1000/RZ1001)\n", hwif->name);
}
}
static ide_pci_device_t rz1000_chipset __devinitdata = {
.name = "RZ100x",
.init_hwif = init_hwif_rz1000,
.channels = 2,
.autodma = NODMA,
.bootable = ON_BOARD,
};
static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_setup_pci_device(dev, &rz1000_chipset);
}
static struct pci_device_id rz1000_pci_tbl[] = {
{ PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
static struct pci_driver driver = {
.name = "RZ1000_IDE",
.id_table = rz1000_pci_tbl,
.probe = rz1000_init_one,
};
static int rz1000_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(rz1000_ide_init);
MODULE_AUTHOR("Andre Hedrick");
MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
MODULE_LICENSE("GPL");