kernel-ark/drivers/usb/host/ohci-pci.c
Benjamin Herrenschmidt 8c8709334c [PATCH] ppc32: Remove CONFIG_PMAC_PBOOK
This patch removes CONFIG_PMAC_PBOOK (PowerBook support).  This is now
split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some
powerbooks have, CONFIG_PM for power management related code, and just left
out of any CONFIG_* option for some generally useful stuff that can be used
on non-laptops as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:43 -07:00

273 lines
6.7 KiB
C

/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
*
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
*
* PCI Bus Glue
*
* This file is licenced under the GPL.
*/
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#endif
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
/*-------------------------------------------------------------------------*/
static int
ohci_pci_reset (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_hcd_init (ohci);
return ohci_init (ohci);
}
static int __devinit
ohci_pci_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
if(hcd->self.controller && hcd->self.controller->bus == &pci_bus_type) {
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/* AMD 756, for most chips (early revs), corrupts register
* values on read ... so enable the vendor workaround.
*/
if (pdev->vendor == PCI_VENDOR_ID_AMD
&& pdev->device == 0x740c) {
ohci->flags = OHCI_QUIRK_AMD756;
ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
// also somewhat erratum 10 (suspend/resume issues)
}
/* FIXME for some of the early AMD 760 southbridges, OHCI
* won't work at all. blacklist them.
*/
/* Apple's OHCI driver has a lot of bizarre workarounds
* for this chip. Evidently control and bulk lists
* can get confused. (B&W G3 models, and ...)
*/
else if (pdev->vendor == PCI_VENDOR_ID_OPTI
&& pdev->device == 0xc861) {
ohci_dbg (ohci,
"WARNING: OPTi workarounds unavailable\n");
}
/* Check for NSC87560. We have to look at the bridge (fn1) to
* identify the USB (fn2). This quirk might apply to more or
* even all NSC stuff.
*/
else if (pdev->vendor == PCI_VENDOR_ID_NS) {
struct pci_dev *b;
b = pci_find_slot (pdev->bus->number,
PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
&& b->vendor == PCI_VENDOR_ID_NS) {
ohci->flags |= OHCI_QUIRK_SUPERIO;
ohci_dbg (ohci, "Using NSC SuperIO setup\n");
}
}
/* Check for Compaq's ZFMicro chipset, which needs short
* delays before control or bulk queues get re-activated
* in finish_unlinks()
*/
else if (pdev->vendor == PCI_VENDOR_ID_COMPAQ
&& pdev->device == 0xa0f8) {
ohci->flags |= OHCI_QUIRK_ZFMICRO;
ohci_dbg (ohci,
"enabled Compaq ZFMicro chipset quirk\n");
}
}
/* NOTE: there may have already been a first reset, to
* keep bios/smm irqs from making trouble
*/
if ((ret = ohci_run (ohci)) < 0) {
ohci_err (ohci, "can't start\n");
ohci_stop (hcd);
return ret;
}
return 0;
}
#ifdef CONFIG_PM
static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
/* suspend root hub, hoping it keeps power during suspend */
if (time_before (jiffies, ohci->next_statechange))
msleep (100);
#ifdef CONFIG_USB_SUSPEND
(void) usb_suspend_device (hcd->self.root_hub, message);
#else
usb_lock_device (hcd->self.root_hub);
(void) ohci_hub_suspend (hcd);
usb_unlock_device (hcd->self.root_hub);
#endif
/* let things settle down a bit */
msleep (100);
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
/* Disable USB PAD & cell clock */
of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
}
#endif /* CONFIG_PPC_PMAC */
return 0;
}
static int ohci_pci_resume (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int retval = 0;
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
/* Re-enable USB PAD & cell clock */
of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
if (of_node)
pmac_call_feature (PMAC_FTR_USB_ENABLE, of_node, 0, 1);
}
#endif /* CONFIG_PPC_PMAC */
/* resume root hub */
if (time_before (jiffies, ohci->next_statechange))
msleep (100);
#ifdef CONFIG_USB_SUSPEND
/* get extra cleanup even if remote wakeup isn't in use */
retval = usb_resume_device (hcd->self.root_hub);
#else
usb_lock_device (hcd->self.root_hub);
retval = ohci_hub_resume (hcd);
usb_unlock_device (hcd->self.root_hub);
#endif
return retval;
}
#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_pci_hc_driver = {
.description = hcd_name,
.product_desc = "OHCI Host Controller",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_MEMORY | HCD_USB11,
/*
* basic lifecycle operations
*/
.reset = ohci_pci_reset,
.start = ohci_pci_start,
#ifdef CONFIG_PM
.suspend = ohci_pci_suspend,
.resume = ohci_pci_resume,
#endif
.stop = ohci_stop,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_USB_SUSPEND
.hub_suspend = ohci_hub_suspend,
.hub_resume = ohci_hub_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS((PCI_CLASS_SERIAL_USB << 8) | 0x10, ~0),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);
/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver ohci_pci_driver = {
.name = (char *) hcd_name,
.id_table = pci_ids,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
.resume = usb_hcd_pci_resume,
#endif
};
static int __init ohci_hcd_pci_init (void)
{
printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
if (usb_disabled())
return -ENODEV;
pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
sizeof (struct ed), sizeof (struct td));
return pci_register_driver (&ohci_pci_driver);
}
module_init (ohci_hcd_pci_init);
/*-------------------------------------------------------------------------*/
static void __exit ohci_hcd_pci_cleanup (void)
{
pci_unregister_driver (&ohci_pci_driver);
}
module_exit (ohci_hcd_pci_cleanup);