kernel-ark/sound/isa/wavefront/wavefront_fx.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

285 lines
6.1 KiB
C

/*
* Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/io.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <sound/core.h>
#include <sound/snd_wavefront.h>
#include <sound/initval.h>
/* Control bits for the Load Control Register
*/
#define FX_LSB_TRANSFER 0x01 /* transfer after DSP LSB byte written */
#define FX_MSB_TRANSFER 0x02 /* transfer after DSP MSB byte written */
#define FX_AUTO_INCR 0x04 /* auto-increment DSP address after transfer */
#define WAIT_IDLE 0xff
static int
wavefront_fx_idle (snd_wavefront_t *dev)
{
int i;
unsigned int x = 0x80;
for (i = 0; i < 1000; i++) {
x = inb (dev->fx_status);
if ((x & 0x80) == 0) {
break;
}
}
if (x & 0x80) {
snd_printk ("FX device never idle.\n");
return 0;
}
return (1);
}
static void
wavefront_fx_mute (snd_wavefront_t *dev, int onoff)
{
if (!wavefront_fx_idle(dev)) {
return;
}
outb (onoff ? 0x02 : 0x00, dev->fx_op);
}
static int
wavefront_fx_memset (snd_wavefront_t *dev,
int page,
int addr,
int cnt,
unsigned short *data)
{
if (page < 0 || page > 7) {
snd_printk ("FX memset: "
"page must be >= 0 and <= 7\n");
return -(EINVAL);
}
if (addr < 0 || addr > 0x7f) {
snd_printk ("FX memset: "
"addr must be >= 0 and <= 7f\n");
return -(EINVAL);
}
if (cnt == 1) {
outb (FX_LSB_TRANSFER, dev->fx_lcr);
outb (page, dev->fx_dsp_page);
outb (addr, dev->fx_dsp_addr);
outb ((data[0] >> 8), dev->fx_dsp_msb);
outb ((data[0] & 0xff), dev->fx_dsp_lsb);
snd_printk ("FX: addr %d:%x set to 0x%x\n",
page, addr, data[0]);
} else {
int i;
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev->fx_lcr);
outb (page, dev->fx_dsp_page);
outb (addr, dev->fx_dsp_addr);
for (i = 0; i < cnt; i++) {
outb ((data[i] >> 8), dev->fx_dsp_msb);
outb ((data[i] & 0xff), dev->fx_dsp_lsb);
if (!wavefront_fx_idle (dev)) {
break;
}
}
if (i != cnt) {
snd_printk ("FX memset "
"(0x%x, 0x%x, 0x%lx, %d) incomplete\n",
page, addr, (unsigned long) data, cnt);
return -(EIO);
}
}
return 0;
}
int
snd_wavefront_fx_detect (snd_wavefront_t *dev)
{
/* This is a crude check, but its the best one I have for now.
Certainly on the Maui and the Tropez, wavefront_fx_idle() will
report "never idle", which suggests that this test should
work OK.
*/
if (inb (dev->fx_status) & 0x80) {
snd_printk ("Hmm, probably a Maui or Tropez.\n");
return -1;
}
return 0;
}
int
snd_wavefront_fx_open (struct snd_hwdep *hw, struct file *file)
{
if (!try_module_get(hw->card->module))
return -EFAULT;
file->private_data = hw;
return 0;
}
int
snd_wavefront_fx_release (struct snd_hwdep *hw, struct file *file)
{
module_put(hw->card->module);
return 0;
}
int
snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct snd_card *card;
snd_wavefront_card_t *acard;
snd_wavefront_t *dev;
wavefront_fx_info r;
unsigned short *page_data = NULL;
unsigned short *pd;
int err = 0;
card = sdev->card;
if (snd_BUG_ON(!card))
return -ENODEV;
if (snd_BUG_ON(!card->private_data))
return -ENODEV;
acard = card->private_data;
dev = &acard->wavefront;
if (copy_from_user (&r, (void __user *)arg, sizeof (wavefront_fx_info)))
return -EFAULT;
switch (r.request) {
case WFFX_MUTE:
wavefront_fx_mute (dev, r.data[0]);
return -EIO;
case WFFX_MEMSET:
if (r.data[2] <= 0) {
snd_printk ("cannot write "
"<= 0 bytes to FX\n");
return -EIO;
} else if (r.data[2] == 1) {
pd = (unsigned short *) &r.data[3];
} else {
if (r.data[2] > 256) {
snd_printk ("cannot write "
"> 512 bytes to FX\n");
return -EIO;
}
page_data = memdup_user((unsigned char __user *)
r.data[3],
r.data[2] * sizeof(short));
if (IS_ERR(page_data))
return PTR_ERR(page_data);
pd = page_data;
}
err = wavefront_fx_memset (dev,
r.data[0], /* page */
r.data[1], /* addr */
r.data[2], /* cnt */
pd);
kfree(page_data);
break;
default:
snd_printk ("FX: ioctl %d not yet supported\n",
r.request);
return -ENOTTY;
}
return err;
}
/* YSS225 initialization.
This code was developed using DOSEMU. The Turtle Beach SETUPSND
utility was run with I/O tracing in DOSEMU enabled, and a reconstruction
of the port I/O done, using the Yamaha faxback document as a guide
to add more logic to the code. Its really pretty weird.
This is the approach of just dumping the whole I/O
sequence as a series of port/value pairs and a simple loop
that outputs it.
*/
int __devinit
snd_wavefront_fx_start (snd_wavefront_t *dev)
{
unsigned int i;
int err;
const struct firmware *firmware = NULL;
if (dev->fx_initialized)
return 0;
err = request_firmware(&firmware, "yamaha/yss225_registers.bin",
dev->card->dev);
if (err < 0) {
err = -1;
goto out;
}
for (i = 0; i + 1 < firmware->size; i += 2) {
if (firmware->data[i] >= 8 && firmware->data[i] < 16) {
outb(firmware->data[i + 1],
dev->base + firmware->data[i]);
} else if (firmware->data[i] == WAIT_IDLE) {
if (!wavefront_fx_idle(dev)) {
err = -1;
goto out;
}
} else {
snd_printk(KERN_ERR "invalid address"
" in register data\n");
err = -1;
goto out;
}
}
dev->fx_initialized = 1;
err = 0;
out:
release_firmware(firmware);
return err;
}
MODULE_FIRMWARE("yamaha/yss225_registers.bin");