kernel-ark/drivers/usb
Felipe Balbi 36f84ffb45 usb: dwc3: ep0: fix Data Phase for transfer sizes aligned to wMaxPacketSize
According to Section 8.5.3.2 of the USB 2.0 specification,
a USB device must terminate a Data Phase with either a
short packet or a ZLP (if the previous transfer was
a multiple of wMaxPacketSize).

For reference, here's what the USB 2.0 specification, section
8.5.3.2 says:

"
8.5.3.2 Variable-length Data Stage

A control pipe may have a variable-length data phase
in which the host requests more data than is contained
in the specified data structure. When all of the data
structure is returned to the host, the function should
indicate that the Data stage is ended by returning a
packet that is shorter than the MaxPacketSize for the
pipe. If the data structure is an exact multiple of
wMaxPacketSize for the pipe, the function will return
a zero-length packet to indicate the end of the Data
stage.
"

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-23 09:55:35 -05:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: rename phy to usb_phy in HCD 2014-09-29 11:52:59 -04:00
class usb: class: usbtmc.c: Cleaning up uninitialized variables 2014-07-09 15:59:10 -07:00
common usb: Add LED triggers for USB activity 2014-09-25 17:05:12 +02:00
core usb: hcd: add generic PHY support 2014-09-29 11:54:02 -04:00
dwc2 usb: gadget: Refactor request completion 2014-09-25 16:58:50 +02:00
dwc3 usb: dwc3: ep0: fix Data Phase for transfer sizes aligned to wMaxPacketSize 2014-10-23 09:55:35 -05:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget usb: gadget: function: f_obex: fix Interface Descriptor Test 2014-10-20 15:58:49 -05:00
host Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2014-10-08 21:40:54 -04:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc usb: rename phy to usb_phy in HCD 2014-09-29 11:52:59 -04:00
mon
musb usb: gadget: Refactor request completion 2014-09-25 16:58:50 +02:00
phy USB: Remove .owner field for driver 2014-09-28 21:55:10 -04:00
renesas_usbhs usb: gadget: Refactor request completion 2014-09-25 16:58:50 +02:00
serial TTY/Serial driver patches for 3.18-rc1 2014-10-08 06:52:11 -04:00
storage USB patches for 3.18-rc1 2014-10-08 06:47:31 -04:00
usbip usbip: remove struct usb_device_id table 2014-08-25 10:40:58 -07:00
wusbcore usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
Kconfig usb: Add LED triggers for USB activity 2014-09-25 17:05:12 +02:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.