455 lines
14 KiB
Plaintext
455 lines
14 KiB
Plaintext
menuconfig REGULATOR
|
|
bool "Voltage and Current Regulator Support"
|
|
help
|
|
Generic Voltage and Current Regulator support.
|
|
|
|
This framework is designed to provide a generic interface to voltage
|
|
and current regulators within the Linux kernel. It's intended to
|
|
provide voltage and current control to client or consumer drivers and
|
|
also provide status information to user space applications through a
|
|
sysfs interface.
|
|
|
|
The intention is to allow systems to dynamically control regulator
|
|
output in order to save power and prolong battery life. This applies
|
|
to both voltage regulators (where voltage output is controllable) and
|
|
current sinks (where current output is controllable).
|
|
|
|
This framework safely compiles out if not selected so that client
|
|
drivers can still be used in systems with no software controllable
|
|
regulators.
|
|
|
|
If unsure, say no.
|
|
|
|
|
|
if REGULATOR
|
|
|
|
config REGULATOR_DEBUG
|
|
bool "Regulator debug support"
|
|
help
|
|
Say yes here to enable debugging support.
|
|
|
|
config REGULATOR_DUMMY
|
|
bool "Provide a dummy regulator if regulator lookups fail"
|
|
help
|
|
If this option is enabled then when a regulator lookup fails
|
|
and the board has not specified that it has provided full
|
|
constraints the regulator core will provide an always
|
|
enabled dummy regulator, allowing consumer drivers to continue.
|
|
|
|
A warning will be generated when this substitution is done.
|
|
|
|
config REGULATOR_FIXED_VOLTAGE
|
|
tristate "Fixed voltage regulator support"
|
|
help
|
|
This driver provides support for fixed voltage regulators,
|
|
useful for systems which use a combination of software
|
|
managed regulators and simple non-configurable regulators.
|
|
|
|
config REGULATOR_VIRTUAL_CONSUMER
|
|
tristate "Virtual regulator consumer support"
|
|
help
|
|
This driver provides a virtual consumer for the voltage and
|
|
current regulator API which provides sysfs controls for
|
|
configuring the supplies requested. This is mainly useful
|
|
for test purposes.
|
|
|
|
If unsure, say no.
|
|
|
|
config REGULATOR_USERSPACE_CONSUMER
|
|
tristate "Userspace regulator consumer support"
|
|
help
|
|
There are some classes of devices that are controlled entirely
|
|
from user space. Userspace consumer driver provides ability to
|
|
control power supplies for such devices.
|
|
|
|
If unsure, say no.
|
|
|
|
config REGULATOR_GPIO
|
|
tristate "GPIO regulator support"
|
|
depends on GENERIC_GPIO
|
|
help
|
|
This driver provides support for regulators that can be
|
|
controlled via gpios.
|
|
It is capable of supporting current and voltage regulators
|
|
and the platform has to provide a mapping of GPIO-states
|
|
to target volts/amps.
|
|
|
|
config REGULATOR_AD5398
|
|
tristate "Analog Devices AD5398/AD5821 regulators"
|
|
depends on I2C
|
|
help
|
|
This driver supports AD5398 and AD5821 current regulator chips.
|
|
If building into module, its name is ad5398.ko.
|
|
|
|
config REGULATOR_AAT2870
|
|
tristate "AnalogicTech AAT2870 Regulators"
|
|
depends on MFD_AAT2870_CORE
|
|
help
|
|
If you have a AnalogicTech AAT2870 say Y to enable the
|
|
regulator driver.
|
|
|
|
config REGULATOR_ARIZONA
|
|
tristate "Wolfson Arizona class devices"
|
|
depends on MFD_ARIZONA
|
|
help
|
|
Support for the regulators found on Wolfson Arizona class
|
|
devices.
|
|
|
|
config REGULATOR_DA903X
|
|
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
|
|
depends on PMIC_DA903X
|
|
help
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
Dialog Semiconductor DA9030/DA9034 PMIC.
|
|
|
|
config REGULATOR_DA9052
|
|
tristate "Dialog Semiconductor DA9052/DA9053 regulators"
|
|
depends on PMIC_DA9052
|
|
help
|
|
This driver supports the voltage regulators of DA9052-BC and
|
|
DA9053-AA/Bx PMIC.
|
|
|
|
config REGULATOR_FAN53555
|
|
tristate "Fairchild FAN53555 Regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports Fairchild FAN53555 Digitally Programmable
|
|
TinyBuck Regulator. The FAN53555 is a step-down switching voltage
|
|
regulator that delivers a digitally programmable output from an
|
|
input voltage supply of 2.5V to 5.5V. The output voltage is
|
|
programmed through an I2C interface.
|
|
|
|
config REGULATOR_ANATOP
|
|
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
|
|
depends on MFD_ANATOP
|
|
help
|
|
Say y here to support Freescale i.MX on-chip ANATOP LDOs
|
|
regulators. It is recommended that this option be
|
|
enabled on i.MX6 platform.
|
|
|
|
config REGULATOR_MC13XXX_CORE
|
|
tristate
|
|
|
|
config REGULATOR_MC13783
|
|
tristate "Freescale MC13783 regulator driver"
|
|
depends on MFD_MC13783
|
|
select REGULATOR_MC13XXX_CORE
|
|
help
|
|
Say y here to support the regulators found on the Freescale MC13783
|
|
PMIC.
|
|
|
|
config REGULATOR_MC13892
|
|
tristate "Freescale MC13892 regulator driver"
|
|
depends on MFD_MC13XXX
|
|
select REGULATOR_MC13XXX_CORE
|
|
help
|
|
Say y here to support the regulators found on the Freescale MC13892
|
|
PMIC.
|
|
|
|
config REGULATOR_ISL6271A
|
|
tristate "Intersil ISL6271A Power regulator"
|
|
depends on I2C
|
|
help
|
|
This driver supports ISL6271A voltage regulator chip.
|
|
|
|
config REGULATOR_88PM8607
|
|
bool "Marvell 88PM8607 Power regulators"
|
|
depends on MFD_88PM860X=y
|
|
help
|
|
This driver supports 88PM8607 voltage regulator chips.
|
|
|
|
config REGULATOR_MAX1586
|
|
tristate "Maxim 1586/1587 voltage regulator"
|
|
depends on I2C
|
|
help
|
|
This driver controls a Maxim 1586 or 1587 voltage output
|
|
regulator via I2C bus. The provided regulator is suitable
|
|
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
|
|
|
|
config REGULATOR_MAX8649
|
|
tristate "Maxim 8649 voltage regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver controls a Maxim 8649 voltage output regulator via
|
|
I2C bus.
|
|
|
|
config REGULATOR_MAX8660
|
|
tristate "Maxim 8660/8661 voltage regulator"
|
|
depends on I2C
|
|
help
|
|
This driver controls a Maxim 8660/8661 voltage output
|
|
regulator via I2C bus.
|
|
|
|
config REGULATOR_MAX8907
|
|
tristate "Maxim 8907 voltage regulator"
|
|
depends on MFD_MAX8907
|
|
help
|
|
This driver controls a Maxim 8907 voltage output regulator
|
|
via I2C bus. The provided regulator is suitable for Tegra
|
|
chip to control Step-Down DC-DC and LDOs.
|
|
|
|
config REGULATOR_MAX8925
|
|
tristate "Maxim MAX8925 Power Management IC"
|
|
depends on MFD_MAX8925
|
|
help
|
|
Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
|
|
|
|
config REGULATOR_MAX8952
|
|
tristate "Maxim MAX8952 Power Management IC"
|
|
depends on I2C
|
|
help
|
|
This driver controls a Maxim 8952 voltage output regulator
|
|
via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
|
|
modes ranging from 0.77V to 1.40V by 0.01V steps.
|
|
|
|
config REGULATOR_MAX8997
|
|
tristate "Maxim 8997/8966 regulator"
|
|
depends on MFD_MAX8997
|
|
help
|
|
This driver controls a Maxim 8997/8966 regulator
|
|
via I2C bus. The provided regulator is suitable for S5PC110,
|
|
S5PV210, and Exynos-4 chips to control VCC_CORE and
|
|
VCC_USIM voltages.
|
|
|
|
config REGULATOR_MAX8998
|
|
tristate "Maxim 8998 voltage regulator"
|
|
depends on MFD_MAX8998
|
|
help
|
|
This driver controls a Maxim 8998 voltage output regulator
|
|
via I2C bus. The provided regulator is suitable for S3C6410
|
|
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
|
|
|
|
config REGULATOR_MAX77686
|
|
tristate "Maxim 77686 regulator"
|
|
depends on MFD_MAX77686
|
|
help
|
|
This driver controls a Maxim 77686 regulator
|
|
via I2C bus. The provided regulator is suitable for
|
|
Exynos-4 chips to control VARM and VINT voltages.
|
|
|
|
config REGULATOR_PCAP
|
|
tristate "Motorola PCAP2 regulator driver"
|
|
depends on EZX_PCAP
|
|
help
|
|
This driver provides support for the voltage regulators of the
|
|
PCAP2 PMIC.
|
|
|
|
config REGULATOR_LP3971
|
|
tristate "National Semiconductors LP3971 PMIC regulator driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here to support the voltage regulators and convertors
|
|
on National Semiconductors LP3971 PMIC
|
|
|
|
config REGULATOR_LP3972
|
|
tristate "National Semiconductors LP3972 PMIC regulator driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here to support the voltage regulators and convertors
|
|
on National Semiconductors LP3972 PMIC
|
|
|
|
config REGULATOR_LP872X
|
|
bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
|
|
depends on I2C=y
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports LP8720/LP8725 PMIC
|
|
|
|
config REGULATOR_LP8788
|
|
bool "TI LP8788 Power Regulators"
|
|
depends on MFD_LP8788
|
|
help
|
|
This driver supports LP8788 voltage regulator chip.
|
|
|
|
config REGULATOR_PCF50633
|
|
tristate "NXP PCF50633 regulator driver"
|
|
depends on MFD_PCF50633
|
|
help
|
|
Say Y here to support the voltage regulators and convertors
|
|
on PCF50633
|
|
|
|
config REGULATOR_RC5T583
|
|
tristate "RICOH RC5T583 Power regulators"
|
|
depends on MFD_RC5T583
|
|
help
|
|
Select this option to enable the power regulator of RICOH
|
|
PMIC RC5T583.
|
|
This driver supports the control of different power rails of device
|
|
through regulator interface. The device supports multiple DCDC/LDO
|
|
outputs which can be controlled by i2c communication.
|
|
|
|
config REGULATOR_S2MPS11
|
|
tristate "Samsung S2MPS11 voltage regulator"
|
|
depends on MFD_SEC_CORE
|
|
help
|
|
This driver supports a Samsung S2MPS11 voltage output regulator
|
|
via I2C bus. S2MPS11 is comprised of high efficient Buck converters
|
|
including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
|
|
|
|
config REGULATOR_S5M8767
|
|
tristate "Samsung S5M8767A voltage regulator"
|
|
depends on MFD_SEC_CORE
|
|
help
|
|
This driver supports a Samsung S5M8767A voltage output regulator
|
|
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
|
|
supports DVS mode with 8bits of output voltage control.
|
|
|
|
config REGULATOR_AB3100
|
|
tristate "ST-Ericsson AB3100 Regulator functions"
|
|
depends on AB3100_CORE
|
|
default y if AB3100_CORE
|
|
help
|
|
These regulators correspond to functionality in the
|
|
AB3100 analog baseband dealing with power regulators
|
|
for the system.
|
|
|
|
config REGULATOR_AB8500
|
|
bool "ST-Ericsson AB8500 Power Regulators"
|
|
depends on AB8500_CORE
|
|
help
|
|
This driver supports the regulators found on the ST-Ericsson mixed
|
|
signal AB8500 PMIC
|
|
|
|
config REGULATOR_DBX500_PRCMU
|
|
bool
|
|
|
|
config REGULATOR_DB8500_PRCMU
|
|
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
|
|
depends on MFD_DB8500_PRCMU
|
|
select REGULATOR_DBX500_PRCMU
|
|
help
|
|
This driver supports the voltage domain regulators controlled by the
|
|
DB8500 PRCMU
|
|
|
|
config REGULATOR_PALMAS
|
|
tristate "TI Palmas PMIC Regulators"
|
|
depends on MFD_PALMAS
|
|
help
|
|
If you wish to control the regulators on the Palmas series of
|
|
chips say Y here. This will enable support for all the software
|
|
controllable SMPS/LDO regulators.
|
|
|
|
The regulators available on Palmas series chips vary depending
|
|
on the muxing. This is handled automatically in the driver by
|
|
reading the mux info from OTP.
|
|
|
|
config REGULATOR_TPS6105X
|
|
tristate "TI TPS6105X Power regulators"
|
|
depends on TPS6105X
|
|
default y if TPS6105X
|
|
help
|
|
This driver supports TPS61050/TPS61052 voltage regulator chips.
|
|
It is a single boost converter primarily for white LEDs and
|
|
audio amplifiers.
|
|
|
|
config REGULATOR_TPS62360
|
|
tristate "TI TPS6236x Power Regulator"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports TPS6236x voltage regulator chip. This
|
|
regulator is meant for processor core supply. This chip is
|
|
high-frequency synchronous step down dc-dc converter optimized
|
|
for battery-powered portable applications.
|
|
|
|
config REGULATOR_TPS65023
|
|
tristate "TI TPS65023 Power regulators"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This driver supports TPS65023 voltage regulator chips. TPS65023 provides
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
|
|
|
config REGULATOR_TPS6507X
|
|
tristate "TI TPS6507X Power regulators"
|
|
depends on I2C
|
|
help
|
|
This driver supports TPS6507X voltage regulator chips. TPS6507X provides
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
|
|
|
config REGULATOR_TPS65090
|
|
tristate "TI TPS65090 Power regulator"
|
|
depends on MFD_TPS65090
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
TI TPS65090 PMIC.
|
|
|
|
config REGULATOR_TPS65217
|
|
tristate "TI TPS65217 Power regulators"
|
|
depends on MFD_TPS65217
|
|
help
|
|
This driver supports TPS65217 voltage regulator chips. TPS65217
|
|
provides three step-down converters and four general-purpose LDO
|
|
voltage regulators. It supports software based voltage control
|
|
for different voltage domains
|
|
|
|
config REGULATOR_TPS6524X
|
|
tristate "TI TPS6524X Power regulators"
|
|
depends on SPI
|
|
help
|
|
This driver supports TPS6524X voltage regulator chips. TPS6524X
|
|
provides three step-down converters and two general-purpose LDO
|
|
voltage regulators. This device is interfaced using a customized
|
|
serial interface currently supported on the sequencer serial
|
|
port controller.
|
|
|
|
config REGULATOR_TPS6586X
|
|
tristate "TI TPS6586X Power regulators"
|
|
depends on MFD_TPS6586X
|
|
help
|
|
This driver supports TPS6586X voltage regulator chips.
|
|
|
|
config REGULATOR_TPS65910
|
|
tristate "TI TPS65910/TPS65911 Power Regulators"
|
|
depends on MFD_TPS65910
|
|
help
|
|
This driver supports TPS65910/TPS65911 voltage regulator chips.
|
|
|
|
config REGULATOR_TPS65912
|
|
tristate "TI TPS65912 Power regulator"
|
|
depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
|
|
help
|
|
This driver supports TPS65912 voltage regulator chip.
|
|
|
|
config REGULATOR_TWL4030
|
|
bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
|
|
depends on TWL4030_CORE
|
|
help
|
|
This driver supports the voltage regulators provided by
|
|
this family of companion chips.
|
|
|
|
config REGULATOR_WM831X
|
|
tristate "Wolfson Microelectronics WM831x PMIC regulators"
|
|
depends on MFD_WM831X
|
|
help
|
|
Support the voltage and current regulators of the WM831x series
|
|
of PMIC devices.
|
|
|
|
config REGULATOR_WM8350
|
|
tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
|
|
depends on MFD_WM8350
|
|
help
|
|
This driver provides support for the voltage and current regulators
|
|
of the WM8350 AudioPlus PMIC.
|
|
|
|
config REGULATOR_WM8400
|
|
tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
|
|
depends on MFD_WM8400
|
|
help
|
|
This driver provides support for the voltage regulators of the
|
|
WM8400 AudioPlus PMIC.
|
|
|
|
config REGULATOR_WM8994
|
|
tristate "Wolfson Microelectronics WM8994 CODEC"
|
|
depends on MFD_WM8994
|
|
help
|
|
This driver provides support for the voltage regulators on the
|
|
WM8994 CODEC.
|
|
|
|
endif
|
|
|