kernel-ark/sound/soc/fsl/Kconfig
Linus Torvalds 2e341ca686 Sound updates for 3.5-rc1
This is the first big chunk for 3.5 merges of sound stuff.
 There are a few big changes in different areas.  First off, the
 streaming logic of USB-audio endpoints has been largely rewritten
 for the better support of "implicit feedback".  If anything about USB
 got broken, this change has to be checked.
 
 For HD-audio, the resume procedure was changed; instead of delaying
 the resume of the hardware until the first use, now waking up immediately
 at resume.  This is for buggy BIOS.
 
 For ASoC, dynamic PCM support and the improved support for digital links
 between off-SoC devices are major framework changes.
 
 Some highlights are below:
 
 * HD-audio
 - Avoid the accesses of invalid pin-control bits that may stall the codec
 - V-ref setup cleanups
 - Fix the races in power-saving code
 - Fix the races in codec cache hashes and connection lists
 - Split some common codes for BIOS auto-parser to hda_auto_parser.c
 - Changed the PM resume code to wake up immediately for buggy BIOS
 - Creative SoundCore3D support
 - Add Conexant CX20751/2/3/4 codec support
 
 * ASoC
 - Dynamic PCM support, allowing support for SoCs with internal routing
   through components with tight sequencing and formatting constraints
   within their internal paths or where there are multiple components
   connected with CPU managed DMA controllers inside the SoC.
 - Greatly improved support for direct digital links between off-SoC
   devices, providing a much simpler way of connecting things like digital
   basebands to CODECs.
 - Much more fine grained and robust locking, cleaning up some of the
   confusion that crept in with multi-component.
 - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
   ST-Ericsson MSP I2S controolers
 - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
   Instruments LM49453.
 - Some regmap changes needed by the Tegra I2S driver.
 - mc13783 audio support.
 
 * Misc
 - Rewrite with module_pci_driver()
 - Xonar DGX support for snd-oxygen
 - Improvement of packet handling in snd-firewire driver
 - New USB-endpoint streaming logic
 - Enhanced M-audio FTU quirks and relevant cleanups
 - Increment the support of OSS devices to 256
 - snd-aloop accuracy improvement
 
 There are a few more pending changes for 3.5, but they will be
 sent slightly later as partly depending on the changes of DRM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvD/9AAoJEGwxgFQ9KSmkPsIP/AuBGpAZy7b7FiEEIy1Hhdws
 US8WVuPzyDslMVdzZ8OFqyPXanIcL9gscoOGMZOEy7UFtMBiR4GuYiPRPubEMxuP
 /gopUqK4SqIsIwT238qqYszSJSxE7gNEZ/2jhSGtkX4EkaSZ4bAskn0iOKX5uw2f
 kTUQknA1rNLIGba2z6rJbgIW7hdxGfpFy05ruv3ct81nO+5JlgyLuP/v5R6jL+do
 cum0N4dJFRd9YSEi2BG612gdz8LJyzOgPqBKmxMEva6BfqLkR8EdP80FtE3eEOiP
 Et1q2LhZwOlBt0BEjsjjOVxMsgxVax6ps9cuNRTk5ECEOldU5dbDatC45L/e9mSD
 OQVUjYAX1mQAtYva4U4PPn6WU6ma2L5yjy4peCObtyCMkEchXk1bfs4CEfVqCXUP
 yFYN8C+y6osZOyWE3+Enn9ifZdWyLeSVq6CT33Yt+fyKlswp6gRkhKYiEPqTA5aU
 p71X59Pp7q1y3tQwiMJNpf2QdkxuxfKURHswdc4BS9ct0mdZhQX0GyDS7OffkTd4
 Lq5UkVMHA1rLlF9oRPd2C9P4BuMEuvLjf662YCKiw+mWFYdBC036DHLLjm1Hcwuj
 UkpQ2PSrrdHG1u0c3ooZ9dQj1BNX4LoABLqvaMtce6sESD/hJ5gcprYJWvtituwM
 ZzZiJavIWsoJ+SWQWBHe
 =+JSm
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...
2012-05-23 13:05:43 -07:00

183 lines
4.6 KiB
Plaintext

config SND_SOC_FSL_SSI
tristate
config SND_SOC_FSL_UTILS
tristate
menuconfig SND_POWERPC_SOC
tristate "SoC Audio for Freescale PowerPC CPUs"
depends on FSL_SOC
help
Say Y or M if you want to add support for codecs attached to
the PowerPC CPUs.
if SND_POWERPC_SOC
config SND_MPC52xx_DMA
tristate
config SND_SOC_POWERPC_DMA
tristate
config SND_SOC_MPC8610_HPCD
tristate "ALSA SoC support for the Freescale MPC8610 HPCD board"
# I2C is necessary for the CS4270 driver
depends on MPC8610_HPCD && I2C
select SND_SOC_FSL_SSI
select SND_SOC_FSL_UTILS
select SND_SOC_POWERPC_DMA
select SND_SOC_CS4270
select SND_SOC_CS4270_VD33_ERRATA
default y if MPC8610_HPCD
help
Say Y if you want to enable audio on the Freescale MPC8610 HPCD.
config SND_SOC_P1022_DS
tristate "ALSA SoC support for the Freescale P1022 DS board"
# I2C is necessary for the WM8776 driver
depends on P1022_DS && I2C
select SND_SOC_FSL_SSI
select SND_SOC_FSL_UTILS
select SND_SOC_POWERPC_DMA
select SND_SOC_WM8776
default y if P1022_DS
help
Say Y if you want to enable audio on the Freescale P1022 DS board.
This will also include the Wolfson Microelectronics WM8776 codec
driver.
config SND_SOC_MPC5200_I2S
tristate "Freescale MPC5200 PSC in I2S mode driver"
depends on PPC_MPC52xx && PPC_BESTCOMM
select SND_MPC52xx_DMA
select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in I2S mode.
config SND_SOC_MPC5200_AC97
tristate "Freescale MPC5200 PSC in AC97 mode driver"
depends on PPC_MPC52xx && PPC_BESTCOMM
select SND_SOC_AC97_BUS
select SND_MPC52xx_DMA
select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in AC97 mode.
config SND_MPC52xx_SOC_PCM030
tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
depends on PPC_MPC5200_SIMPLE
select SND_SOC_MPC5200_AC97
select SND_SOC_WM9712
help
Say Y if you want to add support for sound on the Phytec pcm030
baseboard.
config SND_MPC52xx_SOC_EFIKA
tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
depends on PPC_EFIKA
select SND_SOC_MPC5200_AC97
select SND_SOC_STAC9766
help
Say Y if you want to add support for sound on the Efika.
endif # SND_POWERPC_SOC
menuconfig SND_IMX_SOC
tristate "SoC Audio for Freescale i.MX CPUs"
depends on ARCH_MXC
help
Say Y or M if you want to add support for codecs attached to
the i.MX CPUs.
if SND_IMX_SOC
config SND_SOC_IMX_SSI
tristate
config SND_SOC_IMX_PCM
tristate
config SND_SOC_IMX_PCM_FIQ
tristate
select FIQ
select SND_SOC_IMX_PCM
config SND_SOC_IMX_PCM_DMA
tristate
select SND_SOC_DMAENGINE_PCM
select SND_SOC_IMX_PCM
config SND_SOC_IMX_AUDMUX
tristate
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_SOC_IMX_PCM_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
config SND_SOC_MX27VIS_AIC32X4
tristate "SoC audio support for Visstrim M10 boards"
depends on MACH_IMX27_VISSTRIM_M10 && I2C
select SND_SOC_TLV320AIC32X4
select SND_SOC_IMX_PCM_DMA
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Visstrim SM10
board with TLV320AIC32X4 codec.
config SND_SOC_PHYCORE_AC97
tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
depends on MACH_PCM043 || MACH_PCA100
select SND_SOC_AC97_BUS
select SND_SOC_WM9712
select SND_SOC_IMX_PCM_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
config SND_SOC_EUKREA_TLV320
tristate "Eukrea TLV320"
depends on MACH_EUKREA_MBIMX27_BASEBOARD \
|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
|| MACH_EUKREA_MBIMXSD51_BASEBOARD
depends on I2C
select SND_SOC_TLV320AIC23
select SND_SOC_IMX_PCM_FIQ
select SND_SOC_IMX_AUDMUX
select SND_SOC_IMX_SSI
help
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI interface
config SND_SOC_IMX_SGTL5000
tristate "SoC Audio support for i.MX boards with sgtl5000"
depends on OF && I2C
select SND_SOC_SGTL5000
select SND_SOC_IMX_PCM_DMA
select SND_SOC_IMX_AUDMUX
select SND_SOC_FSL_SSI
select SND_SOC_FSL_UTILS
help
Say Y if you want to add support for SoC audio on an i.MX board with
a sgtl5000 codec.
config SND_SOC_IMX_MC13783
tristate "SoC Audio support for I.MX boards with mc13783"
depends on MFD_MC13783
select SND_SOC_IMX_SSI
select SND_SOC_IMX_AUDMUX
select SND_SOC_MC13783
select SND_SOC_IMX_PCM_DMA
endif # SND_IMX_SOC